Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 7095.6-2008 English PDF

Q: How long will the true-PDF of English version of GB/T 7095.6-2008 be delivered?

Upon your order, we will start to translate GB/T 7095.6-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of GB/T 7095.6-2008_English with my colleagues?

Yes. The purchased PDF of GB/T 7095.6-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version GB/T 7095.6-2008?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7095.6-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7095.6-2008: Enamelled rectangular copper winding wires -- Part 6: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
Status: Valid

GB/T 7095.6: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7095.6-2008	134	Add to Cart	3 days	Enamelled rectangular copper winding wires -- Part 6: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200	Valid
GB/T 7095.6-1995	199	Add to Cart	2 days	Enamelled rectangular wires. Part 6--Polyester (imide) overcoated with polyamide-imide enamelled rectangular copper wires, class 200	Obsolete

Similar standards

GB/T 4074.21 GB/T 4074.3 GB/T 7095.1 GB/T 7095.4 GB/T 7095.5 GB/T 7095.3

Basic data

Standard ID: GB/T 7095.6-2008 (GB/T7095.6-2008)
Description (Translated English): Enamelled rectangular copper winding wires -- Part 6: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K12
Classification of International Standard: 29.060.10
Word Count Estimation: 7,772
Date of Issue: 2008-06-13
Date of Implementation: 2009-03-01
Older Standard (superseded by this standard): GB/T 7095.6-1995
Quoted Standard: GB/T 7095.1-2008
Adopted Standard: IEC 60317-29-1990, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2008 (total 123)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the 200 pairs of flat enamelled copper winding wire coating requirements. Inner coating with polyester or polyester -imide resin-based, such as to retain the original chemical properties of the resin and meets all the requirements for enameled wire, the resin can be modified. Polyamide -imide resin overcoat layer as the base.

GB/T 7095.6-2008: Enamelled rectangular copper winding wires -- Part 6: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Enamelled rectangular copper winding wires Part 6. Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 ICS 29.060.10 K12 National Standards of People's Republic of China GB/T 7095.6-2008/IEC 60317-29.1990 Replacing GB/T 7095.6-1995 Enamelled copper flat wire winding Part 6.200 polyester or polyester-imide / Polyamide-imide enamelled copper flat wire (IEC 60317-29.1990, Specificationsforparticulartypesofwindingwires- Part 29. Polyesterorpolyesterimideovercoatedwithpolyamide-imide enameledrectangularcopperwire, class200, IDT) Posted 2009-03-01 2008-06-13 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Definitions, test methods and appearance General 1 Size 4 1 5 Resistance 1 Elongation 1 6 7 spring angle 2 8 flexibility and adhesion 2 9 Thermal Shock 2 10 Softening 2 11 scratch 2 12 Solvent 2 13 Breakdown Voltage 2 14 Insulation Continuity 2 15 Temperature index 2 16 anti-freezing agent 2 17 solderable 2 18 heat or solvent bonding 2 19 2 dielectric loss factor 20 transformer oil resistant 2 21 3 Loss 23 pinhole test 3 30 3 Packaging GB/T 7095.6-2008/IEC 60317-29.1990

Foreword

GB/T 7095-2008 "flat enamelled copper winding wires" is divided into seven parts. --- Part 1. General requirements; --- Part 2. 120 acetal enamelled copper flat wire; --- Part 3. 155 polyester enamelled copper flat wire; --- Part 4. 180 polyester enamelled copper flat wire; --- Part 5. 240 aromatic polyimide enamelled copper flat wire; --- Part 6.200 polyester or polyester-imide/polyamide-imide enamelled copper flat wire; --- Part 7. Polyester enamelled copper flat wire. This section GB/T 7095 Part 6. This section identical with IEC 60317-29.1990 "Standard winding wires - Part 29.200 polyester or polyester-imide/polyamide Amine imide enamelled copper flat line "Version 1.0 (in English) as well as amendments No. 1 (1997). For ease of use, this section made the following editorial changes. --- Remove the foreword and introduction of international standards; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Increased by 3.2 "look and feel"; --- Fixed IEC 60317-29.1990 in the editorial errors, complements Chapter 23, "pinhole test." This section instead of the date of implementation of the GB/T 7095.6-1995. Section compared with the GB/T 7095.6-1995, major changes in the following. --- According to IEC 60317-29.1990 The structure and content of the GB/T 7095.6-1995 rewritten; --- Conductor nominal size range and heat levels are listed in Chapter 1, "Scope"; --- Increased Chapter 3, "Definitions, test methods - General and appearance." This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized. This section is drafted. Shanghai Electric Cable Research Institute, Shanghai Shen Mao Wire Co., Ltd., Baoding Tianwei Electric Power Wire Co., Ltd., Essex Adams Magnet Wire (Tianjin) Co., Ltd., Shun Electric Co., Ltd. Panyu Branch, Wuxi Universal Wire Co., Ltd., Wuxi City-Chau Electromagnetic Thread Factory. The main drafters of this section. Chen Hui-min, SONG Kang Jing, Yuan Weiguo, Wang Juan, Zhangheng Guang Xu Jin law. This part of the standard replaces the previous editions are. --- GB/T 7095.6-1995. GB/T 7095.6-2008/IEC 60317-29.1990 Enamelled copper flat wire winding Part 6.200 polyester or polyester-imide / Polyamide-imide enamelled copper flat wire

1 Scope

GB/T 7095 provisions of this part of the 200 pairs of coating enameled copper flat wire winding requirements. An inner coating with polyester or polyester-imide tree Lipid-based, such as to retain the chemical properties of the original resin and meets all the requirements prescribed for enameled wire, the resin can be modified. Overcoat poly Polyamideimide resin matrix. NOTE. chemically-modified resin is a variation of, or contain one or more additives to improve certain properties of the resin or its usage characteristics. 200 represents the thermal level, which requires a minimum temperature index of 200, a heat shock temperature of at least 220 ℃. Corresponding to the temperature index temperature in Celsius is not recommended wire temperature, because it depends on the type of device in use include Many factors within. This section applies to a conductor nominal size range. --- Broadside size. minimum 2.00mm, maximum 16.00mm; --- Narrow size. minimum 0.80mm, maximum 5.60mm. This section includes Level 1 and Level 2 film thickness enamelled copper flat wire, and is applicable to all specifications conductor. A combination of size and narrow size broadside and wide/narrow ratio see GB/T 7095.1-2008.

2 Normative references

The following documents contain provisions which, through GB/T reference in this 7095 constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 7095.1-2008 flat enamelled copper winding wires - Part 1. General requirements (IEC 60317-0-2.2005, IDT) 3 Definitions, test methods and General Appearance 3.1 General definitions and test methods General definitions and test methods see GB/T 7095.1-2008 Chapter 3. If GB/T 7095.1-2008 in this section are contradictory to this section shall prevail. 3.2 Appearance See GB/T 7095.1-2008 in Chapter 3.

4 Dimensions

See GB/T 7095.1-2008 in Chapter 4.

5 resistance

See GB/T 7095.1-2008 in Chapter 5.

6 Elongation

See GB/T 7095.1-2008 in Chapter 6. GB/T 7095.6-2008/IEC 60317-29.1990 ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7095.6-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7095.6-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7095.6-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7095.6-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 7095.6-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7095.6-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.