GB/T 7025.2-2008 English PDF

US$414.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 7025.2-2008: Lifts -- Main specification and the dimensions arrangements for its cars, wells and machine rooms -- Part 2: Lifts of class Ⅳ
Status: Valid

GB/T 7025.2: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 7025.2-2008	414	Add to Cart	4 days	Lifts -- Main specification and the dimensions arrangements for its cars, wells and machine rooms -- Part 2: Lifts of class Ⅳ	Valid
GB/T 7025.2-1997	239	Add to Cart	2 days	Lifts--Main specifications and the dimensions arrangements for its cars, wells and machine rooms. Part 2: Lifts of class IV	Obsolete

Similar standards

GB/T 10059   GB/T 10060   GB/T 10058   GB/T 7024   GB/T 7025.1   GB/T 7588.1   

Basic data

Standard ID: GB/T 7025.2-2008 (GB/T7025.2-2008)
Description (Translated English): Lifts -- Main specification and the dimensions arrangements for its cars, wells and machine rooms -- Part 2: Lifts of class ��
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q78
Classification of International Standard: 91.140.90
Word Count Estimation: 21,251
Date of Issue: 2008-12-06
Date of Implementation: 2009-06-01
Older Standard (superseded by this standard): GB/T 7025.2-1997
Quoted Standard: GB 7588-2003; GB 21240-2007
Adopted Standard: ISO 4190-2-2001, IDT
Regulation (derived from): National Standard Approval Announcement 2008 No.19 (Total No.132)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the requirements of the elevator installation �� class size. Defined in 3. 2. 4 �� class elevator is usually used to transport cargo. This section applies to electric and hydraulic drive elevator. Horizontal size is usually determined by the hoistway entrances and drive ways, including horizontal and vertical with automatic sliding doors of the elevator. For other parameters. Manufacturer should also be considered. This section applies to all installations with one or two entrances of the car elevator in the new building. In related cases, it can also be used as a basis for the construction elevator installation. Main parameters and the car contained in this section, wells, inconsistencies in the type and size of the elevator machine room should consult the manufacturer.

GB/T 7025.2-2008: Lifts -- Main specification and the dimensions arrangements for its cars, wells and machine rooms -- Part 2: Lifts of class Ⅳ

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Lifts Main specification and the dimensions arrangements for its cars, wells and machine rooms Part 2. Lifts of class Ⅳ ICS 91.140.90 Q78 National Standards of People's Republic of China GB/T 7025.2-2008/ISO 4190-2.2001 Replacing GB/T 7025.2-1997 Lifts - Main specifications and cars, wells and machine rooms Types and dimensions - Part 2. Ⅳ class elevator [ISO 4190-2.2001Lift (US. Elevator) instalation- Part 2. ClassⅣlifts, IDT] Posted 2008-12-06 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 3.1 General terms and definitions 1 3.2 Elevator Type 2 3.3 Symbol Description 2 4 Elevator 3 main parameters Size 3 5 5.1 3 car internal dimensions 5.2 hoistway size 4 5.3 lobby size 4 5.4 room size 4 5.5 room layout 4 Table 1 Symbol Description 2 Table 2 Ⅳ class size elevator design series A. Horizontal Slide 4 Table 3 Ⅳ class size elevator design series A. vertical sliding door 5 Table 4 Ⅳ class size elevator design series B. Horizontal Slide 6 Table 5 Ⅳ class size elevator design series B. vertical sliding doors 7 1 Ⅳ class diagram. freight elevators --- Size 8 Figure 2 --- electric drive elevator hoistway and machine room 10 3 --- hydraulic elevator hoistway and machine room 11 Figure 4 Ⅳ categories. freight elevators --- Series A. horizontal sliding door 12 Figure 5 Ⅳ categories. freight elevators --- Series A. vertical sliding doors 14 Figure 6 Ⅳ categories. freight elevators --- Series B. Horizontal Slide 15 Graphs 7 Ⅳ. freight elevators --- Series B. vertical sliding doors 16 GB/T 7025.2-2008/ISO 4190-2.2001

Foreword

GB/T 7025 "Lifts - Main specifications and cars, wells, room type and size" contains the following three parts. --- The first part 1. Ⅰ, Ⅱ, Ⅲ, Ⅵ type elevator; Part --- Article 2. Ⅳ class elevator; Part --- Section 3. Ⅴ class elevator. This section GB/T 7025 Part 2. This part identical with ISO 4190-2.2001 "elevator installation - Part 2. Ⅳ class elevator "(in English). For ease of use, this part of ISO 4190-2.2001 made the following editorial changes. --- The "this part of ISO 4190" with the words "in this section." --- This section deleted ISO 4190-2.2001 Introduction, because its existence to understand and use this section does not have any influences. --- In this part of the "Normative references" used instead of the standard ISO 4190-2.2001 corresponding to international standards. --- Because of the elevator industry specific terminology standard GB/T 7024, therefore, removed the ISO 4190-2.2001 in art 3.3 Terms and definitions. For ease of use, increase of Table 1. --- Taking into account the actual situation in China, an increase of 4.2 in 3000kg, 4000kg rated load as usual. --- To coordinate with the relevant standard, delete 5.2.1 allows the design dimensions of the hoistway negative bias content. This Part replaces GB/T 7025.2-1997 "elevator main parameters and cars, wells, room types and dimensions - Part 2. Ⅳ class power ladder". This portion of the GB/T 7025.2-1997 The main differences are. --- Technical content and the chapter number by ISO 4190-2.2001 were developed; --- Remove the ISO foreword; --- The elevator Ⅳ class is divided into A, B series; --- Priority number system by nearly R10 and R5 determine the rated load and rated speed. This part of the National Standardization Technical Committee elevator (SAC/TC196) and focal points. This section is responsible for drafting units. Hitachi Elevator (China) Limited. Participated in the drafting of this section. Schindler (China) Elevator Co., Ltd., Shanghai Mitsubishi Elevator Co., Ltd., Toshiba Elevator (Shenyang) Co., Division Huasheng Fujitec Elevator Co., Ltd. The main drafters of this section. Luguo Xiong, B Po Ming, pondered, Hu Hai, Chen Lu Yang. This part of the standard replaces the previous editions are. --- GB/T 7025-1986, GB/T 7025.2-1997. GB/T 7025.2-2008/ISO 4190-2.2001 Lifts - Main specifications and cars, wells and machine rooms Types and dimensions - Part 2. Ⅳ class elevator

1 Scope

This section provides an elevator installation category Ⅳ desired size, defines a class Ⅳ elevator is usually used to transport cargo in 3.2.4. This section applies to electrical and hydraulic drive lift. The horizontal dimension of the hoistway generally determined by the entrance and a drive way, including with Horizontal and vertical automatic sliding doors of the elevator. For other parameters, the manufacturer should also be considered. This section applies to all installations with one or two entrances of the car elevator in the new building. In a related case, it may be As a basis for building with elevator installation. This section contains the main parameters and cars, wells, room type and size inconsistent elevator should consult the manufacturer. Proposed two bearer type (load per unit area). A series. Table 1 loaded in line with GB 7588-2003 to carry passengers and cargo freight elevators or GB 21240-2007 requirements. Series B. Load does not meet the specified in Table 1 GB 7588-2003 cargo elevator.

2 Normative references

The following documents contain provisions which, through GB/T reference in this 7025 constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB 7588-2003 elevator manufacturing and installation of safety norms (EN81-1.1998, MOD) GB 21240-2007 hydraulic elevator manufacturing and installation of safety norms (EN81-2.1998, MOD)

3 Terms and Definitions

The following terms and definitions apply to this section. 3.1 General terms and definitions 3.1.1 Part of the elevator, to transport passengers and/or other loads. 3.1.2 Part of the hoistway, located above the top of the car service. 3.1.3 Access to each floor for car locations. 3.1.4 Install one or more host and drive ancillary equipment rooms. GB/T 7025.2-2008/ISO 4190-2.2001 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 7025.2-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 7025.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 7025.2-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 7025.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 7025.2-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 7025.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.