GB/T 6935-2010 English PDFUS$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6935-2010: Breeding stock of Chinese sika-deer Status: Valid GB/T 6935: Historical versions
Basic dataStandard ID: GB/T 6935-2010 (GB/T6935-2010)Description (Translated English): Breeding stock of Chinese sika-deer Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B43 Classification of International Standard: 65.020.30 Word Count Estimation: 9,932 Date of Issue: 1/14/2011 Date of Implementation: 7/1/2011 Older Standard (superseded by this standard): GB 6935-1986 Regulation (derived from): Announcement of Newly Approved National Standards No. 2 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies morphological characteristics of Chinese sika deer, production performance, prerequisites and assessment of classification. This Standard is applicable to the identification and grading of Chinese sika deer. GB/T 6935-2010: Breeding stock of Chinese sika-deer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Breeding stock of Chinese sika-deer ICS 65.020.30 B43 National Standards of People's Republic of China Replace GB 6935-1986 Chinese deer deer deer 2011-01-14 release 2011-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released ForewordThis standard replaces GB 6935-1986 "Chinese sika deer deer". This standard compared with GB 6935-1986, the main changes are as follows. --- delete the original standard front section, increase the "scope", the original part of the original standard content into the "scope", and increase the "standard Which stipulates the morphological characteristics, production performance, prerequisite condition and grading of Chinese deer deer. --- Added "terms and definitions"; --- the original "production performance" in the "meat performance" part of the content to delete, increase the "weight" performance indicators; --- the original standard "quality grading standards" revised as "deer assessment", and increase the kind of deer "prerequisite"; --- the original standard "Table 1 Chinese sika deer body shape score" revised as "Table 1 Chinese sika deer deer body shape score Standard ", and the original table of content, data and format were modified; --- delete the original standard "Table 2" in the full content; --- delete the original standard "size standard" in the full content; --- the original standard "Table 4 weight standard" revised as "Table 3 China Sika deer deer weight rating grading (lower limit)", and the original The data in the table are supplemented and modified; --- the original standard "Table 5 Chinese Sika deer of the age of saw production and grading" was revised as "Table 2 Chinese sika deer deer of fresh velvet production The amount of assessment of the classification (lower limit) ", and the original table of content and data were modified; --- delete the original standard "offspring quality standards" in the full content; - delete the original standard "comprehensive assessment" in the "Table 8", and increase the individual assessment of the weighted value and the deer comprehensive assessment score calculation formula; --- delete the original standard "Sika deer (angle) scale parts" in the whole content. Appendix A to this standard is an informative appendix. This standard is proposed by the Ministry of Agriculture of the People's Republic of China. This standard by the National Animal Husbandry Standardization Technical Committee. The drafting of this standard. the Ministry of Agriculture special economic animal and plant and product quality supervision and inspection test center, the Chinese Academy of Agricultural Sciences specialty research Institute. The main drafters of this standard. Wang Feng, Li Sheng, Xiao Jiamei, He Yanli, Jiang Ying. This standard was first published in October 1986 and this is the first revision. Chinese deer deer deer1 ScopeThis standard specifies the morphological characteristics, production performance, essential conditions and grading of Chinese deer deer. This standard applies to the identification and grading of Chinese deer deer.2 terms and definitionsThe following terms and definitions apply to this standard. 2.1 Chinese deer Chinesesika-deer Sesame deer subspecies distributed in the territory of the People's Republic of China under natural conditions and their cultivated varieties or lines. 2.2 Reproductive survival rate The number of surviving deer farms fed to the 3-month-old lactation group was the percentage of the last year's suitable ewes.3 Features3.1 Morphological characteristics 3.1.1 Body characteristics Chinese sika deer for the medium-sized deer, compact body, handsome, head smaller, straight nose, ear slightly larger, upright, angular handle rounded, correct, bright eyes, Flexible, shallow fossa, flat back, chest width, buttocks fullness, slightly higher, short tail, limbs symmetry, robust, the main hoof tip, vice hoof small, Skin without wrinkles. See Table A for the picture of the Chinese deer deer. 3.1.2 coat features Coat season changes significantly. Summer hair is short, no cashmere, brown or brown; back and body side of the distribution of irregular white spots; by Neck to tail base along the ridge has a complete or incomplete back line, generally brown or black brown; white, fan-shaped buttocks obvious, and the surrounding with There are black loop; belly and limbs inside the coat color was gray. Winter hair long and dense, was brown; white spots are not obvious, the next spring off the winter Postganglionic obvious white spots reproduce. 3.1.3 Velvet angle features Velvet is the second sign of the deer, born at the top of the frontal bone. Under normal circumstances, the deer of the antlers every year newborn and fall off once. Tsai Gong The second year after the birth of the deer born vertebral velvet angle, from the third year of the annual growth of the branches of the velvet angle, the development of the velvet angle is usually 3 fork type ~ 4 Branch type, but in the 5 to 7 years old some can grow to 4 fork type ~ 5 fork type, the velvet angle about the basic symmetry. 3.2 Production performance 3.2.1 production performance 2-year-old deer two bars of velvet (fresh velvet) yield of more than 1200g, 3 years old, 4 years old, 5 years old, 6 years old and 7 years old deer three fork velvet (fresh) yield Not less than 2500g, 3500g, 4000g, 4500g and 5000g. 3.2.2 Reproductive performance The survival rate of the deer was 16 to 18 months and the survival rate was not less than 75%. The suitable breeding age of the deer was 4 years old to 7 years old. 3.2.3 weight Deer primary, 1 year old, 2 years old, 3 years old and 4 years of age should not be less than 5.5kg, 60kg, 90kg, 110kg and 120kg; Deer raw, 1 year old, 2 years old, 3 years old and 4 years of age should not be less than 5kg, 50kg, 60kg, 70kg and 75kg. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6935-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 6935-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6935-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6935-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6935-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6935-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
