GB/T 6931.3-2020 English PDF

US$559.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6931.3-2020: Belt drives - Vocabulary - Part 3: Synchronous belt drives
Status: Valid

GB/T 6931.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6931.3-2020	559	Add to Cart	6 days	Belt drives - Vocabulary - Part 3: Synchronous belt drives	Valid
GB/T 6931.3-2008	679	Add to Cart	3 days	Belt drives vocabulary -- Part 3: Synchronous belt drives vocabulary	Obsolete
GB/T 6931.3-1986	599	Add to Cart	4 days	Synchronous belt drives--Terminology	Obsolete

Similar standards

GB/T 10414   GB/T 10716   GB/T 3478.5   GB/T 1243   GB/T 6931.2   GB/T 6931.1   

Basic data

Standard ID: GB/T 6931.3-2020 (GB/T6931.3-2020)
Description (Translated English): Belt drives - Vocabulary - Part 3: Synchronous belt drives
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J18
Classification of International Standard: 21.220.10
Word Count Estimation: 30,358
Date of Issue: 2020-03-31
Date of Implementation: 2021-02-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 6931.3-2020: Belt drives - Vocabulary - Part 3: Synchronous belt drives

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Belt drives--Vocabulary--Part 3. Synchronous belt drives ICS 21.220.10 J18 National Standards of People's Republic of China Replace GB/T 6931.3-2008 Belt drive terminology Part 3. Timing belt drive (ISO 5288..2017, Synchronousbeltdrives-Vocabulary, MOD) 2020-03-31 release 2021-02-01 implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee

Foreword

GB/T 6931 "Glossary of Belt Drive" is divided into 3 parts. --- Part 1. Basic terminology; --- Part 2. V-belt and V-ribbed belt drive; --- Part 3. Timing belt drive. This part is Part 3 of GB/T 6931. This part replaces GB/T 6931.3-2008 "Terminology of belt drive Part 3. Terminology of synchronous belt drive", and GB/T 6931.3-2008 In contrast, the main technical changes except for editorial changes are as follows. --- Removed normative references (see Chapter 2 of the.2008 edition); --- Added general terms (see 2.1); --- Added the terms and definitions of "node pitch difference" (see 2.2.3); --- Revised the diagram with height (see Figure 5, Figure 4 of the.2008 edition); --- Added terms and definitions related to tooth shape (see 2.3); --- Added terms and definitions related to the type of timing belt used (see 2.4); --- Added terms and definitions related to the structure of the timing belt (see 2.5); --- Modified the terms and definitions of "tooth surface" (see 2.6.5, 3.2.7, 3.3.6,.2008 version 3.2.5, 4.2.7, 4.3.2.4); --- Added terms and definitions related to the main types of timing belts (see 2.7); --- Modified the symbol of the top pitch of the pulley (see 3.1.6,.2008 version 4.1.6); --- Modified the illustration of the pulley pitch (see Figure 29, Figure 22 of the.2008 edition); --- Revised the illustration of the minimum wheel width (see Figure 30, Figure 23 of the.2008 edition); --- Modified the illustration of measuring the tooth backlash of the pulley (see Figure 31, Figure 24 of the.2008 edition); --- Added the term and definition of "tooth width" (see 3.2.13); --- Added the terms and definitions of "Wheel Tool Root Width" (see 3.3.12). This part uses the redrafting method to modify and adopt ISO 5288..2017 "Terminology of Synchronous Belt Transmission". Compared with ISO 5288..2017, this part has more structural adjustments. Appendix A lists the differences between this part and ISO 5288..2017. A comparison list of chapter numbers. There are technical differences between this part and ISO 5288..2017. Appendix B gives a list of corresponding technical differences and their causes. The following editorial changes have been made in this section. --- Modified the standard name; --- Added the informative appendix "Terms of Main Types of Synchronous Belt" (see Appendix C). This part is proposed by China Machinery Industry Federation. This part is under the jurisdiction of the National Pulley and Belt Standardization Technical Committee (SAC/TC428). This section was drafted by. China Machine Productivity Promotion Center, Wuxi Belt Belt Co., Ltd., Ningbo Fulong Synchronous Belt Co., Ltd., Nanjing Bokechi Tape Co., Ltd., Ningbo Fengmao Far East Rubber Co., Ltd., Zhejiang Samsung Tape Co., Ltd., Sichuan Deen Precision Technology Co., Ltd. have Limited company, Jiangsu Zhongsheng Transmission Technology Co., Ltd., Hubei Automotive Industry Institute. The main drafters of this section. Qin Shuan, Zhou Yujie, Wu Yizhen, Pan Hairui, Ying Jianli, Wang Juncheng, Chen Xiaobin, Lei Yongzhi, Zhu Tong, Ren Aihua. The previous versions of the standard replaced by this part are as follows. --- GB/T 6931.3-1986, GB/T 6931.3-2008. Belt drive terminology Part 3. Timing belt drive

1 Scope

This part of GB/T 6931 defines the terms, definitions and symbols of timing belts, pulleys and cogging tools. This section applies to synchronous belt drive applications. Note. See Appendix C for terminology of main types of timing belts. 2 Terms, definitions and symbols of timing belts 2.1 General terms 2.1.1 Endless synchronous belt drive Drive with endless timing belt. 2.1.2 Open synchronous belt drive Drive with open timing belt. 2.2 General terms, definitions and symbols of timing belts 2.2.1 Toothpitch Pb Under the specified tension, the linear distance of the symmetric center line of two adjacent teeth on the longitudinal section of the belt. Note. See Figure 1. figure 1 2.2.2 Pitchline When the belt is bent perpendicular to its bottom edge, any perimeter in the belt with the original length unchanged. Note. See Figure 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6931.3-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6931.3-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6931.3-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6931.3-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6931.3-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6931.3-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.