GB/T 6809.1-2009 English PDFUS$314.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6809.1-2009: Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 1: Structure and external covers Status: Valid GB/T 6809.1: Historical versions
Basic dataStandard ID: GB/T 6809.1-2009 (GB/T6809.1-2009)Description (Translated English): Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 1: Structure and external covers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J92 Classification of International Standard: 27.020 Word Count Estimation: 16,181 Date of Issue: 2009-03-19 Date of Implementation: 2009-11-01 Older Standard (superseded by this standard): GB/T 6809.1-2003 Quoted Standard: GB/T 1883.1; GB/T 1883.2 Adopted Standard: ISO 7967-1-2005, IDT Regulation (derived from): National Standard Approval Announcement 2009 No.3 (Total No.143) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the relevant terms reciprocating engine mount and external covers of. GB/T 1883 is given a classification of reciprocating internal combustion engine, and provides the basic terminology of this engine and its characteristics. GB/T 6809.1-2009: Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 1: Structure and external covers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Reciprocating internal combustion engines.Vocabulary of components and systems.Part 1. Structure and external covers ICS 27.020 J92 National Standards of People's Republic of China GB/T 6809.1-2009/ISO 7967-1.2005 Replacing GB/T 6809.1-2003 Reciprocating internal combustion engine components and systems Part 1. Structure and external covers (ISO 7967-1.2005, IDT) Posted 2009-03-19 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 3.1 crankcase 1 3.2 base 3 3.3 oil pan 3 3.4 Machine column 3 3.5 cylinder block rack 4 3.6 cylinder 5 3.7 intermediate separator 5 3.8 guide 6 3.9 6 cylinder head 3.10 cylinder head gasket 7 3.11 crankcase ventilator 8 Chinese index 9 English 10 Index GB/T 6809.1-2009/ISO 7967-1.2005ForewordGB/T 6809 "Reciprocating internal combustion engine components and systems" is divided into nine sections. --- Part 1. Structure and external covers; --- Part 2. Valves, camshaft drive and actuating mechanisms; --- Part 3. The main moving parts; --- Part 4. Pressure charging and exhaust systems; --- Part 5. Cooling system; --- Part 6. Lubricating systems; --- Part 7. Governing systems; --- Part 8. Starting systems; --- Part 9. monitoring system. This is Part 1 GB/T 6809's. This part identical with ISO 7967-1.2005 "Reciprocating internal combustion engine components and systems - Vocabulary - Part 1. Structure and external Cover "(in English). This section is equivalent translation ISO 7967-1.2005. For ease of use, this section made the following editorial changes. --- "This International Standard" be replaced by "this section"; --- Deleted international standards foreword; --- Other international standard ISO 7967-1 referenced with the international standard has been adopted as the standard instead of the corresponding country. This part is GB/T 6809.1-2003 "Reciprocating internal combustion engine components and systems - Part 1. Structure and external cover Cover "amendments. Compared with GB/T 6809.1-2003, part of the main changes are as follows. --- Modify the presentation of terms and definitions; --- Added some of the terms. This part is proposed by China Machinery Industry Federation. This part of the internal combustion engine by the National Standardization Technical Committee (SAC/TC177) centralized. This section was drafted by. Shanghai Internal Combustion Engine Research Institute, Snow Dragon Holdings Limited. The main drafters of this section. Bi Ye, Zhang Peili, Qu Junming, meter-dimensional Bin Xie Yaping, Chen Yunqing, Songguo Chan. This part of the standard replaces the previous editions are. --- GB/T 6809.1-2003. GB/T 6809.1-2009/ISO 7967-1.2005 Reciprocating internal combustion engine components and systems Part 1. Structure and external covers1 ScopeGB/T 6809 This section provides related terms reciprocating internal combustion engine fastener and external covers of. GB/T 1883 is given a classification reciprocating internal combustion engine, and sets out the basic terms such engines and their properties.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 6809 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1883.1 Reciprocating internal combustion engines - Vocabulary - Part 1. engine design and operation (GB/T 1883.1-2005, ISO 2710-1.2000, IDT) GB/T 1883.2 Reciprocating internal combustion engines - Vocabulary - Part 2. Terms for engine maintenance (GB/T 1883.2-2005, ISO 2710-2.1999, IDT)3 Terms and definitionsThe following terms and definitions apply GB/T 6809 to the present section. 3.1 crankcase No. Definition Legend 3.1.1 crankcase The crank chamber and located therein Crankshaft main bearing portion Wai Live for carrying the cylinder, the cylinder Water jacket or the cylinder block, and provide Planar mounting member 3.1.2 body Crankcase and connected thereto into a Cylinder body or cylinder water jacket GB/T 6809.1-2009/ISO 7967-1.2005 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6809.1-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 6809.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6809.1-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6809.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6809.1-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6809.1-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
