GB/T 6753.1-2007 English PDFUS$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6753.1-2007: Paints, varnishes and printing inks -- Determination of fineness of grind Status: Obsolete GB/T 6753.1: Historical versions
Basic dataStandard ID: GB/T 6753.1-2007 (GB/T6753.1-2007)Description (Translated English): Paints, varnishes and printing inks -- Determination of fineness of grind Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G50 Classification of International Standard: 87.040 Word Count Estimation: 8,880 Date of Issue: 2007-09-11 Date of Implementation: 2008-04-01 Older Standard (superseded by this standard): GB/T 6753.1-1986 Quoted Standard: GB/T 3186-2006; GB/T 20777-2006 Adopted Standard: ISO 1524-2000, IDT Regulation (derived from): China Announcement of Newly Approved National Standards No. 10 of 2007 (No. 110 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard applies to paints, varnishes, printing inks and related products, sampling and testing. This standard specifies the use of appropriate fineness plate (scale of microns) measured Paints, varnishes, printing ink fineness approach. This standard applies to all types of liquid paints and varnishes and related products. Which l00um fineness board for general occasions, but the fineness of 50um board, especially the fineness of 25 um plate only skilled laboratory personnel to operate in order to obtain reliable results. In the judgment is less than 10um readings, it should be especially cautious. GB/T 6753.1-2007: Paints, varnishes and printing inks -- Determination of fineness of grind---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Paints, varnishes and printing inks. Determination of fineness of grind ICS 87.040 G50 National Standards of People's Republic of China GB/T 6753.1-2007/ISO 1524.2000 Replacing GB/T 6753.1-1986 Paints, varnishes and printing inks Determination of fineness of grind (ISO 1524.2000, IDT) Posted 2007-09-11 2008-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is identical with ISO 1524.2000 "Paints, varnishes and printing inks determination of the fineness of grind of" (in English). This standard replaces GB/T 6753.1-1986 "Determination of fineness of grind of paint." The previous version of Standard GB/T 6753.1-1986 main technical differences are as follows. --- Front line version is equivalent to using ISO 1524. 1983; --- Increasing the scope of the standard, including paints, varnishes and printing inks; --- Canceled range is (0 ~ 15) μm fineness board; --- Canceled checks groove depths; --- Cancel it clear that the sample was scraped off after reading time, only requires reading as soon as possible. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee paint pigment. This standard drafting units. China National Chemical Construction Corporation, Changzhou coating Chemical Research Institute. The main drafters of this standard. Gu Hui Qi. This standard was first published in 1986, this is the first revision. The standard commission and the National Standardization Technical Committee paint pigment responsible for the interpretation. GB/T 6753.1-2007/ISO 1524.2000 Paints, varnishes and printing inks Determination of fineness of grind1 ScopeThis standard is one of the series of standards for paints, varnishes, printing inks and sampling and testing of related products. This standard specifies the use of a suitable fineness plate (scale of microns) Paints, varnishes, printing ink fineness of grind method. This standard applies to all types of liquid paints and varnishes and related products. Wherein 100μm fineness board for general field Together, but the fineness board 50μm, especially 25μm fineness board only skilled laboratory personnel to operate in order to get reliable results. In judging the reading of less than 10μm, should be particularly cautious.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528.2000, IDT) GB/T 20777-2006 Paints and varnishes examination and preparation of samples (ISO 1513.1992, IDT)3 Terms and DefinitionsThis standard uses the following terms and definitions. 3.1 Under the test conditions specified in the standard fineness of the board to get readings. This reading can indicate the depth of the recess fineness board, where you can Easy to identify the individual products in the solid particles.4 Instrument4.1 fineness board By the length of 175mm, width of 65mm, 13mm thick blocks made of hardened steel. NOTE. It is recommended to use blocks made of stainless steel grind. The above block polished steel polished, thereon one or two out of about 140mm, a width of 12.5mm parallel to the long side of the steel block Groove. The depth of each groove should be evenly decreasing along the edge of long steel block. End of the slot has a suitable depth (for example 25μm, 50μm or 100μm), the depth of the other side of zero, and should be based on the provisions in Table 1 Subdivision. Typical grind pattern shown in Figure 1. Table 1 Typical fineness plate indexing and the recommended range in microns The maximum depth of the groove indexing interval recommended test range 1001040 - 90 25 2.5 5 ~ 15 GB/T 6753.1-2007/ISO 1524.2000 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6753.1-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 6753.1-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 6753.1-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6753.1-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 6753.1-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6753.1-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
