GB/T 6730.36-2016 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6730.36-2016: Iron ores -- Determination of copper content -- Flame atomic absorption spectrometric method
Status: Valid

GB/T 6730.36: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6730.36-2016	299	Add to Cart	3 days	Iron ores -- Determination of copper content -- Flame atomic absorption spectrometric method	Valid
GB/T 6730.36-1986	199	Add to Cart	2 days	Methods for chemical analysis of iron ores. The flame atomic absorption spectrophotometric method for the determination of copper content	Obsolete

Similar standards

GB/T 6730.5   GB/T 6730.28   GB/T 6730.2   GB/T 6730.45   GB/T 6730.30   GB/T 6730.31   

Basic data

Standard ID: GB/T 6730.36-2016 (GB/T6730.36-2016)
Description (Translated English): Iron ores -- Determination of copper content -- Flame atomic absorption spectrometric method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: D31
Classification of International Standard: 73.060
Word Count Estimation: 15,153
Date of Issue: 2016-02-24
Date of Implementation: 2016-11-01
Older Standard (superseded by this standard): GB/T 6730.36-1986
Regulation (derived from): National Standard Announcement No
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 6730.36-2016: Iron ores -- Determination of copper content -- Flame atomic absorption spectrometric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Iron ores - Determination of copper content - Flame atomic absorption spectrometric method ICS 73.060.10 D31 National Standards of People's Republic of China Replacing GB/T 6730.36-1986 Determination of copper content in iron ore Flame atomic absorption spectrometry (ISO 5418-2..2006, IronOres-Determinationofcopper- Part 2. Flameatomicabsorptionspectrometricmethod, MOD) 2016-02-24 released 2016-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

GB/T 6730 "iron ore" is divided into the following parts. - Part 1 Preparation of pre-dried samples for iron ore analysis; - Part 36 - Determination of copper content of iron ore - Flame atomic absorption spectrometric method; This part is part 36 of GB/T 6730. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the replacement GB/T 6730.36-1986 "Iron ore chemical analysis method Atomic absorption spectrophotometric determination of copper", this part Compared with GB/T 6730.36-1986, in addition to editorial changes, the main technical changes are as follows. --- Added "warning"; - an increase in the "1 scope" and "2 normative reference documents" normative general elements, and an increase of "9 test report" normative technology Factor; --- modified the "sample decomposition" in the amount of reagents; --- modified the "copper percentage" of the formula; --- modified the expression of "final result calculation"; --- modified "precision"; --- this part adds "8.3 oxide conversion factor"; - the contents of Appendix B of the original national standard have been removed and the contents of the new Appendix B and Appendix C have been added. This part uses the re-drafting method to modify ISO 5418-2..2006 "Determination of copper content of iron ore Part 2. Flame atomic Absorption spectroscopy ". This section compares with the international standard ISO 5418-2..2006, except for editorial changes, the main technical differences are as follows. --- normative reference documents with national standards instead of the corresponding international standards, and increase the reference GB/T 12807, the specific adjustment see the first 2 chapters; - 7.4.1 of ISO 5418-2..2006 "The residue was melted with sodium carbonate and leached with dilute nitric acid (1 50)" modified as "residue with 1 g Sodium carbonate melting, with dilute nitric acid (1 20) leaching "; --- 7.4.5 in ISO 5418-2..2006 "Remove part of the test solution (x mL, x ≥ 20), add 0.2 (100-x) mL base solution" modified To "accurately remove part of the test solution 20.00mL in 100mL volumetric flask, add 16mL bottom liquid". This part is made by China Iron and Steel Industry Association. This section is headed by the National Commission on Standardization of Iron Ore and Direct Reductive Iron (SAC/TC317). This part of the drafting unit. Shanghai Entry-Exit Inspection and Quarantine Bureau of industrial products and raw materials testing technology center, Wuhan Iron and Steel Institute, Metallurgical Industry letter Interest standard institute. The main drafters of this part. Ren Liping, Zhang Linlin, Zhu Zhixiu, Min Hong, Xu Jie, Wen Xiangdong, Chen Zhibin. This part of the previous version of the standard to replace the release of the situation. --- GB/T 6730.36-1986. Determination of copper content in iron ore Flame atomic absorption spectrometry WARNING. This section may involve the safety of hazardous substances, hazardous operations and equipment. This section does not indicate all possible security questions question. It is the responsibility of the user to take appropriate safety and health measures and to ensure compliance with the requirements of the relevant national regulations.

1 Scope

This part of GB/T 6730 specifies the method for the determination of copper in iron ores by flame atomic absorption spectrometry. This part applies to natural iron ore, iron concentrate and block, including the determination of copper content in sintered products, the determination of the range (mass fraction). 0.004% to 0.8%.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 6682 Analytical laboratory water specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) GB/T 6730.1 Preparation of pre-dried samples for iron ore analysis (GB/T 6730.1-2016, ISO 7764..2006, MOD) GB/T 10322.1 Iron ore sampling and sample preparation method (GB/T 10322.1-2014, ISO 3082..2009, IDT) GB/T 12806 laboratory glass instrument single standard line capacity bottle (GB/T 12806-2011, ISO 1042..1998, NEQ) GB/T 12807 Laboratory glass instrumentation pipette (GB/T 12807-1991, neqISO 835. 1981) GB/T 12808 Laboratory glass instruments Single line pipette pipette (GB/T 12808-1991, eqvISO 648. 1977)

3 principle

The samples were decomposed with hydrochloric acid, nitric acid and hydrofluoric acid, and the chlorinated fuming was added. After the volume was set at 324.7 nm at the atomic absorption spectrometer, The absorbance of copper was measured with an air-acetylene flame and the copper content was calculated.

4 reagent

Analyze only the approved analytical reagent, the water should meet the secondary water specified in GB/T 6682. The distillation apparatus used shall be free of copper and the deionized water shall not be in contact with the copper and copper faucet. 4.1 metal iron powder, copper content (mass fraction) ≤0.001%. 4.2 anhydrous sodium carbonate. 4.3 hydrochloric acid, ρ1.19g/mL. 4.4 Hydrochloric acid, 1 2. 4.5 nitric acid, ρ1.42g/mL. 4.6 nitric acid, 1 1. 4.7 perchloric acid, ρ1.67g/mL. 4.8 hydrofluoric acid, ρ1.15g/mL. 4.9 Bottom solution. Dissolve 15 g of metallic iron powder (see 4.1) in 150 mL of hydrochloric acid (see 4.4). The solution was cooled to room temperature and 10 mL of nitric acid was added (see ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6730.36-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6730.36-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6730.36-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6730.36-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6730.36-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6730.36-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.