GB/T 6730.13-2025 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6730.13-2025	RFQ	ASK	3 days	Iron ores - Determination of calcium and magnesium content - EGTA-CyDTA titrimetric method	Valid
GB/T 6730.13-2007	259	Add to Cart	3 days	Iron ores -- Determination of aluminium content -- EDTA-CyDTA titrimetric method	Valid
GB/T 6730.13-1986	239	Add to Cart	2 days	Methods for chemical analysis of iron ores--The potassium permanganate volumetric method for the determination of calcium content	Obsolete

Basic data

Standard ID: GB/T 6730.13-2025 (GB/T6730.13-2025)
Description (Translated English): Iron ores - Determination of calcium and magnesium content - EGTA-CyDTA titrimetric method
Sector / Industry: National Standard (Recommended)
Date of Implementation: 2026-03-01
Older Standard (superseded by this standard): GB/T 6730.13-2007

GB/T 6730.13-2007: Iron ores -- Determination of aluminium content -- EDTA-CyDTA titrimetric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Iron ores. Determiantion of aluminium content. EDTA-CyDTA titrimetric method ICS 73.060.10 D31 National Standards of People's Republic of China Replacing GB/T 6730.13-1986, GB/T 6730.15-1986 Determination of calcium and magnesium content in iron ore EGTA-C y DTA titration Posted 2007-08-14 2008-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

Determination of calcium GB/T 6730 this part instead of GB/T 6730.13-1986 "method of chemical analysis of iron potassium permanganate volumetric method Amount "and GB/T 6730.15-1986" iron chemical analysis of complex titration of magnesium content. " This portion of the GB/T 6730.13-1986, GB/T 6730.15-1986 comparison, the main changes are as follows. --- GB/T 6730.13-1986 and GB/T 6730.15-1986 respectively determination of calcium and magnesium content, and this part of the method is the same time Determination of calcium and magnesium content; --- GB/T 6730.13-1986 use of potassium permanganate standard solution, this section is amended as EGTA standard solution; GB/T 6730.15-1986 using EDTA standard solution, this section is amended as CyDTA standard solution; Concentration --- GB/T 6730.15-1986 of 2.30 Mg standard solution of 1mL containing 1.00mg, this section is amended as 1mL Containing 0.30mg; GB/T 6730.13-1986 in 2.16.2 calibrated using sodium oxalate, calcium oxide to modify this part of the calibration; --- GB/T 6730.15-1986 Determination of 4.5, this section is not adopted; --- GB/T 6730.13-1986 two ammonia separation in 4.5.3, this section is amended as ammonia twice - potassium joint separation. This section of Appendix A normative appendix. This part is proposed by the China Iron and Steel Association. This section is under the jurisdiction of Metallurgical Industry Information Standards Institute. This part mainly drafted by. Sinosteel Maanshan Institute of Mining Research. This part drafters. Zeng Shen Jin, Xuxiu Ping, Zhang Xian only. This part of the standard replaces the previous editions are. --- GB/T 6730.13-1986; --- GB/T 6730.15-1986. Determination of calcium and magnesium content in iron ore EGTA-C y DTA titration Warning --- Use this section shall be a person experiences regular laboratory work. This section does not point out all possible security asked question. Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.

1 Scope

GB/T 6730 This section specifies the determination of calcium and magnesium content by EGTA-CyDTA titration. This section applies to natural iron ore, iron ore measuring, sinter and pellets of calcium and magnesium content; measurement range (mass fraction). Calcium Content. 1.5% to 15.0%, Mg content. > 1.0%.

2 Normative references

The following documents contain provisions which, through reference to GB/T 6730 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-1992, neq ISO 3696. 1987) GB/T 6730.1 Methods for chemical analysis of iron pre-dried sample was prepared using (GB/T 6730.1-1986, eqv ISO 7764. 1985) GB/T 10322.1 iron ore sampling and sample preparation method (GB/T 10322.1-2000, idt ISO 3082.1998) GB/T 12806 Laboratory glassware Single Groove flask (GB/T 12806-1991, neq ISO 1042. 1983) GB/T 12808 Laboratory glassware Single Groove pipette (GB/T 12808-1991, neq ISO 648. 1977) Principle 3 Samples with hydrochloric acid, nitric acid decomposition, filtration; the residue with hydrofluoric acid to remove silicon after (except fluorine-containing sample), potassium pyrosulfate melt. With ammonia hydroxide Iron, potassium, aluminum, titanium precipitate as a hydroxide, ammonium persulfate and manganese oxide as places hydrated manganese dioxide was removed by filtration and the hydroxide simultaneously, this Phosphorus in the form of iron phosphate are simultaneously separated. When the pH value is greater than 12, calcium indicators were used and EGTA standard titration solution titration of calcium. At pH = 10 with EGTA network After closing calcium, plus chrome black T indicator, with CyDTA standard titration solution titration magnesium.

4 Reagents and materials

Analysis Unless otherwise stated, use only reagents of recognized analytical grade and distilled water or equivalent purity of its water, in line with GB/T 6682 Provisions. 4.1 potassium pyrosulfate. 4.2 ammonium persulfate. 4.3 hydrochloride, ρ1.19g/mL. HCl 4.4, 1 + 1. 4.5 hydrochloric acid, 5 + 95. Sulfate 4.6, 1 + 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6730.13-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6730.13-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6730.13-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6730.13-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6730.13-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6730.13-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.