GB/T 6572-2014 English PDFUS$1074.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6572-2014: Earth-moving machinery -- Hydraulic excavators -- Terminology and commercial specifications Status: Valid GB/T 6572: Historical versions
Basic dataStandard ID: GB/T 6572-2014 (GB/T6572-2014)Description (Translated English): Earth-moving machinery -- Hydraulic excavators -- Terminology and commercial specifications Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P97 Classification of International Standard: 01.040.53; 53.100 Word Count Estimation: 54,527 Date of Issue: 7/24/2014 Date of Implementation: 1/1/2015 Older Standard (superseded by this standard): GB/T 6572.1-1997 Quoted Standard: GB/T 8489-2008; GB/T 18577.2-2008; ISO 3450; ISO 5010; ISO 6014; ISO 6015; ISO 6746-1; ISO 9249; ISO 10265; ISO 10567; ISO 14396 Adopted Standard: ISO 7135-2009, IDT Regulation (derived from): National Standards Bulletin No. 19, 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the technical content of its own crawler and wheeled hydraulic excavators, their equipment and fixtures terminology and business documents. This Standard applies to general purpose excavator and parts, not suitable for walking exca GB/T 6572-2014: Earth-moving machinery -- Hydraulic excavators -- Terminology and commercial specifications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Earth-moving machinery. Hydraulic excavators. Terminology and commercial specifications ICS 01.040.53; 53.100 P97 National Standards of People's Republic of China Replacing GB/T 6572.1-1997 Moving machinery - Hydraulic excavators Terminology and commercial specifications (ISO 7135.2009, IDT) Issued on. 2014-07-24 2015-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Host 5 5 working equipment and fixtures 8 6 Performance Terms 24 7 technical content business documents (international units) 25 Appendix A (normative) Host size 28 Dimensions Appendix B (normative) Working devices and ancillary equipment 32 References 42 Index 43ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 6572.1-1997 "hydraulic excavator term." This standard compared with GB/T 6572.1-1997, except series Series modifications outside the main technical changes are as follows. --- Standard divided by the standard number into a separate part of the standard number; --- Revised standard clauses structure; --- Additions and modifications to the relevant terms and definitions. This standard uses the translation method identical with ISO 7135.2009 "moving machinery - Hydraulic excavators - Terminology and commercial specifications." Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 10913-2005 moving machinery traveling velocity measurement (ISO 6014. 1986, MOD) --- GB/T 13331-2014 moving machinery - Hydraulic excavator from the weight (ISO 10567.2007, IDT) --- GB/T 13332-2008 moving machinery - Hydraulic excavators and backhoe loaders determination Digging Force (ISO 6015. 2006, IDT) --- GB/T 14781-2014 moving machinery machines tires Steering requirements (ISO 5010.2007, IDT) --- GB/T 16936-2007 moving machinery net engine power test specifications (ISO 9249.1997, MOD) --- Definitions GB/T 18577.1-2008 moving machinery dimensions and codes - Part 1. Host (ISO 6746-1.2003, IDT) --- GB /performance requirements and test methods T 19929-2005 moving machinery crawler machine brake system (ISO 10265. 1998, MOD) --- Performance requirements and test methods GB/T 21152-2007 moving machinery machines tires braking system (ISO 3450. 1996, IDT) --- GB/T 21405-2008 reciprocating determining and measuring methods for exhaust emission tests internal combustion engine power Additional requirements (ISO 14396.2002, IDT) This standard made the following editorial changes. --- Corrected the reference numeral 16 in FIG. 2 and illustrated in Figure 3 and the label does not correspond to 2 and 3; --- 3.3.4, "Figure 18" should be corrected to "Figures 19 and 20"; --- 3.4.1 Note 3, "6 to 21" should be corrected to "6 to 9, 18 and 21"; HH26 icon --- Appendix B, "25" should be corrected to "2.5"; Size --- corrected Appendix B of RR4 illustration label line up outside the dimension line GRP reference ground plane; --- Appendix B in the figures, and increased double-dashed line in the two-dot spacing; --- Increase the index. The standard proposed by China Machinery Industry Federation. This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized. This standard is drafted by. Tianjin Institute of Mechanical Engineering, Guangxi Liugong Machinery Co., Ltd., Hill redevelopment Machine Co., Ltd., Shandong Carter Heavy Industry Machinery Co., Ltd. Participated in the drafting of this standard. Sany Heavy Machinery Co., Sunward Intelligent Equipment Co., Ltd., Shanghai Pengpu Machinery Co., Ltd., Xiamen, Xiamen Engineering Machinery Company Limited. Drafters of this standard. Wu Yun Cai, Huang Xiang whole, NI Lin, Zhongyu Zhu, Peng Ying Crust Chenbao Ming, Li Wei Ping. This standard replaces the standards previously issued as follows. --- GB/T 6572.1-1986, GB/T 6572.1-1997. Moving machinery - Hydraulic excavators Terminology and commercial specifications1 ScopeThis standard specifies the technical self-crawler hydraulic excavator tires and their equipment and fixtures terms and business documents content. This standard applies to general purpose excavators and components, not for walking excavator term dedicated member or commercial specifications.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8498-2008 moving machinery - Basic types - Identification and terms and definitions (ISO 6165.2006, IDT) Definitions GB/T 18577.2-2008 moving machinery dimensions and codes - Part 2. Equipment and fixtures (ISO 6746-2.2003, IDT) Performance requirements ISO 3450 Earth-moving machinery machines tires braking system braking system and test methods (Earth-moving machinery-Brakingsystemsofrubber-tyredmachines-Systemsandperformancerequirementsand testproceduresforbrakingsystems) ISO 5010 Earth-moving machinery machines tires Steering requirements (Earth-movingmachinery-Rubber-tyredma- chines-Steeringrequirements) ISO 6014 Earth-moving machinery traveling velocity measurement (Earth-movingmachinery-Determinationofgroundspeed) ISO 6015 Earth - moving machinery - Hydraulic excavators and backhoe loaders determination Digging Force (Earth-moving machinery-Hydraulicexcavatorsandbackhoeloaders-Methodsofdeterminingtoolforces) ISO 6746-1 define the size and sign of moving machinery - Part 1. Host (Earth-movingmachinery-Defini- tionsofdimensionsandcodes-Part 1. Basemachine) ISO 9249 Earth-moving machinery engine test specifications Net power (Earth-movingmachinery-Enginetestcode- Netpower) Performance requirements ISO 10265 Earth-moving machinery crawler machine braking systems and test methods (Earth-moving machinery-Crawlermachines-Performancerequirementsandtestproceduresforbrakingsystems) ISO 10567 Earth-moving machinery - Hydraulic excavators weight (Earth-movingmachinery-Hydraulicexcavators- Liftcapacity) ISO 8178 is attached to determine the exhaust emission tests and measurement methods ISO 14396 Reciprocating internal combustion engine power Plus Requirements (Reciprocatinginternalcombustionengines-Determinationandmethodforthemeasurement ofenginepower-AdditionalrequirementsforexhaustemissiontestsinaccordancewithISO 8178)3 Terms and DefinitionsGB/T 8498-2008, GB/T 18577.2-2008 and as defined in ISO 6746-1 and the following terms and definitions apply to this file. ...... |
