GB/T 6375-2008 English PDF

US$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6375-2008: Earth-moving machinery -- Method of test for the measurement of drawbar pull
Status: Valid

GB/T 6375: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6375-2008	214	Add to Cart	3 days	Earth-moving machinery -- Method of test for the measurement of drawbar pull	Valid
GB/T 6375-1986	279	Add to Cart	3 days	Earth-moving machinery--Method of test for the measurement of draw-bar pull	Obsolete

Similar standards

GB/T 8419   GB/T 17300   GB/T 16936   GB/T 8498   GB/T 8595   

Basic data

Standard ID: GB/T 6375-2008 (GB/T6375-2008)
Description (Translated English): Earth-moving machinery -- Method of test for the measurement of drawbar pull
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P97
Classification of International Standard: 53.100
Word Count Estimation: 11,176
Date of Issue: 2008-08-26
Date of Implementation: 2009-02-01
Older Standard (superseded by this standard): GB/T 6375-1986
Adopted Standard: ISO 7464-1983, IDT
Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the band load or no-load state, self-propelled traction performance test method earthmoving machinery and work equipment with or drag. This standard specifies the test in the travel speed of the following indicators: traction, traction tires or tracks of power and slip rate. This standard applies to all types of excavators beyond self- moving machinery.

GB/T 6375-2008: Earth-moving machinery -- Method of test for the measurement of drawbar pull

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Earth-moving machinery. Method of test for the measurement of drawbar pull ICS 53.100 P97 National Standards of People's Republic of China GB/T 6375-2008/ISO 7464. 1983 Replacing GB/T 6375-1986 Earthmoving machinery traction test methods (ISO 7464. 1983, IDT) Posted 2008-08-26 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with ISO 7464. 1983 "earth-moving machinery traction test methods" (in English). This standard is equivalent translation ISO 7464. 1983. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- Instead of using the decimal point as a decimal point ",". ","; --- Remove the foreword to international standards; --- The ISO 7464. 1983 Chapter 1, Chapter 2 of this standard combined in Chapter 1; --- The ISO 7464. "suspension block" 1983 Chapter 4 under increased number depending on the content, this standard 3.1.1,3.1.2,3.1.3; --- The ISO 7464. 1983 5.2 The contents of the standard table to the form 1. This standard replaces GB/T 6375-1986 "Test Method for traction moving machinery." This standard compared with GB/T 6375-1986, the main changes are as follows. --- Increasing the foreword; --- Adjustment range of relevant instructions; --- Adjust the terms and definitions; --- Increased unit description; --- Adjust the content of 2.3; --- Adjust the formula of representation; --- Adjust the parameters of the symbol, in accordance with international standards for a change; Related Content --- test report made adjustments and modifications. The standard proposed by China Machinery Industry Federation. This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized. This standard is drafted by. Tianjin Institute of Mechanical Engineering. Participated in the drafting of this standard. Xiamen, Xiamen Engineering Machinery Co., Ltd., Sany Heavy Industry Co., Ltd., Fukuda Lovol International Heavy Industry shares Parts Limited, Guangxi Liugong Machinery Co., Ltd. The main drafters. Zhang Lijuan, Li Wei Ping, Yi Di liters Junwei, chapter two levels. This standard replaces the standards previously issued as follows. --- GB/T 6375-1986. GB/T 6375-2008/ISO 7464. 1983 Earthmoving machinery traction test methods

1 Scope

This standard specifies the belt under load or no-load state, the traction performance self-propelled earth-moving machinery and work equipment or dragging with the test Test methods. This standard specifies test at driving speed following indicators. traction, traction power and tires or tracks slip rate. This standard applies to all types of excavators other than self-propelled earth-moving machinery.

2 Terms and definitions

The following terms and definitions apply to this standard. 2.1 On the test machine is used to connect the load measuring car parts. 2.2 Applied to the tow bar or tow level device connector on the traction unit is kN (kN). 2.3 Connecting member passing through the drawbar or hitch traction power, in kilowatts (kW). It is made with the speed [in meters per Second (m/s)] and Traction [unit kN (kN)] product calculated. 2.4 The actual test machine running speed in meters per second (m/s), or kilometers per hour (km/h). 2.5 Specified by the manufacturer, the engine generates rated power of the engine speed, in revolutions per minute (r/min). 2.6 Engine at maximum throttle position when not subjected to load speed, in revolutions per minute (r/min). 2.7 Test machine time required for the duration of the test or test run through the distance, in seconds (s). 2.8 Distance from the test machine at the time of testing are running in meters (m). 2.9 In the same test distance, the rotational speed of the drive wheel traction when the difference between the speed of the drive wheels when traction idling speed when the ratio of a hundred He expressed as a fraction. GB/T 6375-2008/ISO 7464. 1983 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6375-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6375-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6375-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6375-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6375-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6375-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.