GB/T 6374-2018 English PDF

US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6374-2018: Rock drilling machines and pneumatic tools -- Shanks and fitting dimensions of chuck bushings
Status: Valid

GB/T 6374: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 6374-2018	359	Add to Cart	4 days	Rock drilling machines and pneumatic tools -- Shanks and fitting dimensions of chuck bushings	Valid
GB/T 6374-2004	719	Add to Cart	4 days	Shanks for rock drilling machines and pneumatic tools and fitting dimensions of chuck bushings	Obsolete
GB/T 6374-1986	479	Add to Cart	4 days	Shanks for rock drilling machines and pneumatic tools and fitting dimensions of chuck bushings	Obsolete

Similar standards

GB/T 5357   GB/T 6110   JB/T 3943   GB/T 3228   GB/T 3227   

Basic data

Standard ID: GB/T 6374-2018 (GB/T6374-2018)
Description (Translated English): Rock drilling machines and pneumatic tools -- Shanks and fitting dimensions of chuck bushings
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J48
Classification of International Standard: 25.140.10
Word Count Estimation: 18,113
Date of Issue: 2018-12-28
Date of Implementation: 2019-07-01
Older Standard (superseded by this standard): GB/T 6374-2004
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 6374-2018: Rock drilling machines and pneumatic tools -- Shanks and fitting dimensions of chuck bushings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rock drilling machines and pneumatic tools--Shanks and fitting dimensions of chuck bushings ICS 25.140.10 J48 National Standards of People's Republic of China Replace GB/T 6374-2004 Rock drilling machinery and pneumatic tools Tail handle and bushing fit size (ISO 1180.1983, Shanksforpneumatictoolsandfittingdimensions Ofchuckbushings; ISO 723.1991, Rockdrilingequipment- Hexagonaldrilsteels, MOD) 2018-12-28 released.2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 6374-2004 "rock drilling machinery and pneumatic tool tail handle and bushing fit size", and GB/T 6374- The main technical changes in.2004 are as follows. --- Increase the method of marking the tail shank in Chapter 3 (see Chapter 3); --- Increased brazing specifications for 24, 26 and 30 (see Table 1); --- Change the end chamfer size 22mm of the tail shank to 20mm (see Table 1); --- Removed the upper limit of the diameter of the drill rod (see Table 1); --- Increase 1 to 159 series (see Table 12); --- Added informative Appendix A and Appendix B. This standard uses the redrafting method to modify ISO 1180.1983 "Tail shank and bushing fit dimensions for pneumatic tools" and ISO 723. 1991 "Hard rock drill with hollow hexagonal brazed steel forged shoulder and tail sleeve". This standard has some structural adjustments compared to ISO 1180.1983 and ISO 723.1991. This standard is listed in Appendix A. A list of chapter numbers for ISO 1180.1983 and ISO 723.1991. There are technical differences between this standard and ISO 1180.1983 and ISO 723.1991. The terms involved in these differences have been adopted in The vertical single line (∣) of the outer margin is marked. A list of the corresponding technical differences and their causes is given in Appendix B. This standard also made the following editorial changes. ---Incorporate the contents of ISO 1180-Add.1.1985, with vertical double lines (􀰘) on the margins outside the modified terms Marked. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Standardization Technical Committee for Rock Drilling Machinery and Pneumatic Tools (SAC/TC173). This standard was drafted. Tianshui Rock Drilling Machinery Pneumatic Tools Research Institute, Changsha Mining and Metallurgy Research Institute Co., Ltd., Luoyang Bianli Engineering Machinery Machinery Co., Ltd. The main drafters of this standard. Wang Jianzu, Gao Bo, Wang Jihong, Gao Xuejing, Chen Jilong. The previous versions of the standards replaced by this standard are. ---GB/T 6374-1986, GB/T 6374-2004. Rock drilling machinery and pneumatic tools Tail handle and bushing fit size

1 Scope

This standard specifies the dimensions of the shank and bushings for rock drilling machines and pneumatic tools. This standard is applicable to pneumatic tools such as pneumatic picks and air shovel, and rod-shaped hexagonal hollow brazed steel forging with shoulder stalks and bushings.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1301-2008 Hollow steel for rock drilling rods (ISO 722.1991, MOD) GB/T 1443-2016 Self-clamping cone for machine tools and tool shanks (ISO 296.1991, MOD)

3 tail handle size marking method

The size of the tail handle should include the following. --- The form and name of the tail handle; ---The basic size of the tail handle (the first column of each table); --- The length of the tail handle. Example. The crusher tail shank with a basic size of 25 mm and a length of 108 mm is marked as. Crusher tail handle 25×108

4 pneumatic picks and bushings

See Figure 1 and Table 1 for the matching dimensions of the tail shank and bushing. The unit is mm Figure 1 pneumatic pick handle and bushing ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 6374-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 6374-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 6374-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 6374-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 6374-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6374-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.