GB/T 6202-2019 English PDFUS$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 6202-2019: Wide belt sanding machine Status: Valid GB/T 6202: Historical versions
Basic dataStandard ID: GB/T 6202-2019 (GB/T6202-2019)Description (Translated English): Wide belt sanding machine Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B97 Classification of International Standard: 79.120.10 Word Count Estimation: 18,134 Date of Issue: 2019-08-30 Date of Implementation: 2020-03-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 6202-2019: Wide belt sanding machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Wide belt sanding machine ICS 79.120.10 B97 National Standards of People's Republic of China Replace GB/T 6202-2000 Wide belt sander Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 6202-2000 "General Technical Conditions for Wideband Sander". This standard is compared with GB/T 6202-2000. The main technical changes except editorial changes are as follows. --- Increased the scope of application of broadband sanders (see Chapter 1, Chapter 1 of the.2000 edition); --- Revised the normative reference document (see Chapter 2, Chapter 2 of the.2000 edition); --- Modified the diagram (see Chapter 3, Chapter 3 of the.2000 edition); --- Modified the main parameter series and extended it (see Chapter 4, Version 4.1 of.2000); ---Modified the technical requirements, geometric accuracy, working accuracy and corresponding testing methods of the main components (see 5.2, 5.4, 5.5,.2000 edition) 4.8, 4.11, 4.12); --- Increased safety requirements for wet grinding, safety requirements for abnormal working conditions when grinding sheet metal and vacuum requirements (see 5.3.10, 5.3.14, 5.3.15); --- Increased the vibration limit of the main moving roller in the dry run test (see 5.6.4); --- Modified the air operation test noise limit (see 5.6.4); --- Modified the contents of the logo, packaging, storage (see Chapter 7, Chapter 7 of the.2000 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the National Forestry and Grassland Bureau. This standard is under the jurisdiction of the National Wood-based Panel Machinery Standardization Technical Committee (SAC/TC66). This standard was drafted. Suzhou Sufu Ma Machinery Co., Ltd., Beijing Forestry Machinery Research Institute of the National Forestry and Prairie Bureau, Qingdao Shengfujing Grinding Technology Co., Ltd. The main drafters of this standard. Shen Wenrong, Liu Yanli, Li Xiaoxu, Xu Yingjun, Wang Tinghui, Hou Jinbiao, Li Ling, Tang Qi. The previous versions of the standards replaced by this standard are. ---GB/T 6202-1986, GB/T 6202-2000; ---GB/T 6203-1986; ---GB/T 10014-1988. Wide belt sander1 ScopeThis standard specifies the main parameters, requirements, inspection rules and signs, packaging and storage of broadband sanding machines. This standard applies to the decorative laminate of solid wood panels, wood and non-wood panels and their components, inorganic lightweight panels, thermosetting resins. Wide-band sander (hereinafter referred to as sander) for grinding of sheet metal and sheet metal.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 1184 Shape and position tolerances without tolerance values GB/T 1958-2017 Geometrical Product Specification (GPS) Geometric Tolerance Detection and Verification GB 2894 safety signs and guidelines for their use GB/T 3280 stainless steel cold rolled steel plate and strip General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components GB/T 4237 stainless steel hot rolled steel sheet and strip GB/T 4897 Particleboard GB/T 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions GB/T 7251.1 Low-voltage switchgear and control equipment - Part 1. General GB/T 7932 Pneumatic pairing system and its components general rules and safety requirements GB/T 9061 General technical requirements for metal cutting machine tools GB/T 9239.1 Mechanical vibration constant (rigid) rotor balance quality requirements - Part 1 GB/T 11718 medium density fiberboard GB/T 13306 signage General technical conditions for GB/T 13384 mechanical and electrical product packaging General technical conditions for safety protection of GB 15760 metal cutting machine tools GB/T 18262 General technical conditions for wood-based panel machinery GB/T 18514 Wood-based panel machinery safety rules JB/T 5000.3 General technical requirements for heavy machinery - Part 3. Welding parts JB/T 9953 Woodworking Machine Noise Acoustic (Pressure) Level Measurement Method3 sketch3.1 The structure of the single-side sander (work bench) is shown in Figure 1. ...... |
