GB/T 596-2008 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 596-2008: Marine bronze male thread stop-check valves
Status: Valid

GB/T 596: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 596-2008	189	Add to Cart	3 days	Marine bronze male thread stop-check valves	Valid
GB/T 596-1983	199	Add to Cart	2 days	Marine bronze male thread stop and check valves	Obsolete

Similar standards

GB/T 589   GB/T 586   GB/T 592   

Basic data

Standard ID: GB/T 596-2008 (GB/T596-2008)
Description (Translated English): Marine bronze male thread stop-check valves
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U52
Classification of International Standard: 47.020.30
Word Count Estimation: 8,839
Date of Issue: 2008-10-20
Date of Implementation: 2009-04-01
Older Standard (superseded by this standard): GB/T 596-1983
Regulation (derived from): National Standard Approval Announcement 2008 No.17 (Total No.130)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the marine bronze male thread stop check valves (hereinafter referred to as the closing check valve) of classification and labeling, requirements, test methods, inspection rules, packaging and storage. This standard applies to the sea, freshwater, fuel, oil, air and the temperature does not exceed 250��C steam piping systems ship with a closing check valve design, manufacture and acceptance.

GB/T 596-2008: Marine bronze male thread stop-check valves

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Marine bronze male thread stop-check valves ICS 47.020.30 U52 National Standards of People's Republic of China Replacing GB/T 596-1983 Marine bronze male threaded stop check valves Posted 2008-10-20 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 596-1983 "Marine bronze male threaded stop check valves." This standard compared with GB/T 596-1983, mainly for the following changes. --- Increasing the stem and the valve cover sealing surface sealing requirements; --- Increased test methods, inspection rules, marking, packaging, and other content. The standard proposed by China State Shipbuilding Corporation. This standard by the National Marine Machinery Standardization Technical Committee piping attachment points Technical Committee. This standard was drafted. Jiangxi Marine Valve Factory, Technical and Economic Research Institute of China Shipbuilding Industry. The main drafters of this standard. Dingyan Yuan, Luo Yuan hair, MO IAC. This standard replaces the standards previously issued as follows. --- GB 596-1965, GB 596-1976, GB/T 596-1983. Marine bronze male threaded stop check valves

1 Scope

This standard specifies the Marine bronze male thread stop valve (hereinafter referred to as the cut-off valve) classification and marking requirements, test methods, Inspection rules, packaging and storage. This standard applies to water, fresh water, fuel, oil, air and temperature no higher than 250 ℃ steam ship piping systems cutoff valve Design, manufacture and acceptance.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 600 marine piping valves General technical requirements GB/T 1176-1987 Cast Copper Alloys conditions (neq ISO 1338. 1977) GB/T 1184-1996 shape and position tolerances without individual tolerance value (eqv ISO 2768-2. 1989) GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance tolerance (eqv ISO 2768-1. 1989) GB/T 1958 Geometrical Product Specifications (GPS) shape and position tolerance testing requirements GB/T 2059-2000 Copper and copper alloy strip Flag GB/T 3032 Ship pipeline accessories GB/T 4423-2007 Copper and copper alloy rod drawing CB56 pipe nipple flat shoulder CB/T 3589-1994 Marine valve non-asbestos gaskets and packing material

3 Classification and Marking

Type 3.1 Off valve is divided into the following two types. a) A type --- Feed-off valve; b) B type --- right angle cut-off valve. 3.2 Basic parameters The basic parameters of the cut-off valve are shown in Table 1. Table 1 Basic parameters of the cut-off valve Type Nominal pressure PN/MPa Nominal diameter DN/mm A, B 4.0 10 ~ 32 3.3 Structure and basic dimensions Stop check valve structure and basic dimensions shown in Figure 1 and Table 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 596-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 596-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 596-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 596-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 596-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 596-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.