GB/T 5953.1-2009 English PDFUS$229.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5953.1-2009: Steel wire for cold heading and cold forging -- Part 1: Intended for heat treatment Status: Valid GB/T 5953.1: Historical versions
Basic dataStandard ID: GB/T 5953.1-2009 (GB/T5953.1-2009)Description (Translated English): Steel wire for cold heading and cold forging -- Part 1: Intended for heat treatment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H49 Classification of International Standard: 77.140.65 Word Count Estimation: 10,145 Date of Issue: 2009-07-08 Date of Implementation: 2010-04-01 Older Standard (superseded by this standard): GB/T 5953-1999 Quoted Standard: GB/T 222; GB/T 223.3; GB/T 223.5; GB/T 223.9; GB/T 223.11; GB/T 223.12; GB/T 223.13; GB/T 223.14; GB/T 223.16; GB/T 223.18; GB/T 223.23; GB/T 223.26; GB/T 223.53; GB/T 223.54; GB/T 223.58; GB/T 223.59; GB/T 223.60; GB/T 223.61; GB/T 223.62; GB/T 223.63; GB/T 223.64; GB/T 223.67; GB/T 223.68; GB/T 223.69; GB/T 223.71; GB/T 223.72; GB/T 223.75; GB/T 223.76; GB/T 224; GB/T 228; GB/T 230.1; GB/T 342-1997; GB/T 905-1994; GB/T 2103; GB/T 3207-2008; GB/T 4336; GB/T 6478; GB/T 13298; GB/T 20066; JB/T 5074-2007; YB/T 5293 Adopted Standard: JIS G3508-2-2005, MOD; JIS G3509-2-2003, MOD Regulation (derived from): National Standard Approval Announcement 2009 No.9 (Total No.149) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the type of heat treatment and cold heading wire classification code, ordering content, dimensions, marking and quality certification, packaging, shape, weight and tolerance, technical requirements, test methods, inspection rules. This section applies to the manufacture of rivets, bolts, . Screws and studs and other fasteners and cold formed parts with high-quality carbon structural steel and alloy steel (hereinafter referred to as steel fasteners or cold forming parts by cold heading and cold extrusion after molding, the need for carburizing, infiltration helium, quenching and other heat treatment. GB/T 5953.1-2009: Steel wire for cold heading and cold forging -- Part 1: Intended for heat treatment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Steel wire for cold heading and cold forging.Part 1. Intended for heat treatment ICS 77.140.65 H49 National Standards of People's Republic of China Replacing GB/T 5953-1999 Cold heading wire Part 1. heat-type cold heading wire Posted 2009-07-08 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 5953 "cold heading wire" is divided into three parts. --- Part 1. heat-type cold heading steel wire; --- Part 2. Non-heat-type cold heading steel wire; --- Part 3. non-quenched cold heading steel wire type. This section GB/T 5953 Part 1, modify using JISG3508-2.2005 "Cold upsetting boron steel" (in English) and JISG3509-2.2003 "cold upsetting low alloy steel" (in English). According to this section JISG3508-2.2005 and JISG3509-2.2003 redrafted. For comparison, in the informative Appendix A This section lists the terms and JISG3508-2.2005 and JISG3509-2.2003 technical differences between the terms of its causes list. This Part and Part 2 together instead of GB/T 5953-1999 "cold heading wire." Section compared with GB/T 5953-1999 The main changes are as follows. --- Increased by fasteners and cold formed parts heat treatment classification; --- Modify the delivery status; --- Increased the order content; --- Expanded from wire diameter range (1.00 ~ 16.0) mm to (1.00 ~ 45.0) mm; --- Tightened the dimensional accuracy and flatness; --- Improving the heavy plate; --- Canceled tag example; --- Canceled the chemical composition, smelting method, macrostructure and grain size requirements of the regulations; --- Modify the mechanical properties; --- Tightened the decarburized layer; --- Increased "by carbon requirements"; --- Stretching number of samples from 5% disc revised to three. Appendix A of this section is an informative annex. This part is proposed by the China Iron and Steel Association. This part of the National Steel Standardization Technical Committee. This part mainly drafted by. Dongbei Special Steel Group Co., Ltd., Nanjing Baori Wire Products Co., Ltd., Metallurgical Industry Information Standards Institute, Xingtai Iron and Steel Co., Ltd. The main drafters of this section. XU Xiao Qian, really Juan, Han domains, Wang Zhengmao, Wang Lingjun, Daishi Feng, Zhao Baomin. This part of the standard replaces the previous editions are. --- GB/T 5953-1986, GB/T 5954-1986, GB/T 5953-1999. Cold heading wire Part 1. heat-type cold heading wire1 ScopeThis section specifies the type of heat treatment and cold heading steel wire classification code, ordering the content, size, shape, weight and tolerance, technical requirements, Test methods, inspection rules, packaging, marking and quality certification. This section applies to the manufacture of rivets, bolts, screws and studs and other fasteners and cold formed parts with high-quality carbon structural steel and alloy structural steel Wire (hereinafter referred to as wire). Fasteners or cold formed parts after cold heading and cold extrusion, the need for surface carburizing, nitriding, quenching and other heat deal with.2 Normative referencesThe following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this section, however, encourage the parties to this part of the research agreement Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 222 chemical composition of finished steel tolerance GB/T 223.3 steel and alloy chemical analysis method two antipyrine methane phosphomolybdate gravimetric method for the determination of phosphorus content GB/T 223.5 steel measuring soluble silicon and total silicon content reduced silicon molybdate salt spectrophotometric method GB/T 223.9 steel and aluminum alloys - Determination of chromium content Azure S Spectrophotometry Determination of GB/T 223.11 steel and alloy chromium content of visual titration or potentiometric titration GB/T 223.12 Methods for chemical analysis of iron, steel and alloys of sodium carbonate separation - diphenyl hydrazine spectrophotometric determination of chromium content GB/T 223.13 Methods for chemical analysis of iron, steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content GB/T 223.14 Methods for chemical analysis of iron, steel and alloys, tantalum reagent extraction and spectrophotometric determination of vanadium content Spectrophotometric determination of titanium content GB/T 223.16 Methods for chemical analysis of iron, steel and alloy The chromotropic acid GB/T 223.18 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation - determination of copper content Iodometry GB/T 223.23 steel and alloy - Determination of nickel content dimethylglyoxime spectrophotometry GB/T 223.26 steel and alloy - Determination of molybdenum content - Thiocyanate spectrophotometric GB/T 223.53 Methods for chemical analysis of iron, steel and alloys by flame atomic absorption spectrophotometric method for determination of copper content GB/T 223.54 Methods for chemical analysis of iron, steel and alloys by flame atomic absorption spectrophotometric method for determination of nickel content GB/T 223.58 Methods for chemical analysis of iron, steel and alloys of sodium arsenite - sodium nitrite determination of manganese content titration GB/T 223.59 Steel and Alloy Determination of phosphorus content by bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometry GB/T 223.60 Methods for chemical analysis of iron, steel and alloy perchloric acid dehydration gravimetric method for the determination of silicon content Determination of phosphorus content GB/T 223.61 Methods for chemical analysis of iron, steel and alloy The ammonium phosphomolybdate volumetric method GB/T 223.62 Methods for chemical analysis of iron, steel and alloy butyl acetate extraction spectrophotometric determination of phosphorus content GB/T 223.63 Methods for chemical analysis of iron, steel and alloy The sodium (potassium) for Determination of amount GB/T 223.64 steel and alloy manganese content - Flame Atomic Absorption Spectrometry GB/T 223.67 steel and alloy sulfur content - Methylene blue spectrophotometric method Determination of sulfur content of potassium iodate titration method after GB/T 223.68 Methods for chemical analysis of iron, steel and alloy tube furnace combustion GB/T 223.69 after carbon and alloy steel - Determination of the pipe furnace combustion gas volumetric method After the determination of carbon content - Gravimetric method GB/T 223.71 Methods for chemical analysis of iron, steel and alloy tube furnace combustion ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5953.1-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 5953.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5953.1-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5953.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5953.1-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5953.1-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
