GB/T 5856-2024 English PDFUS$379.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5856-2024: Wood based panel machinery - General specifications of the hot press Status: Valid GB/T 5856: Historical versions
Basic dataStandard ID: GB/T 5856-2024 (GB/T5856-2024)Description (Translated English): Wood based panel machinery - General specifications of the hot press Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B97 Classification of International Standard: 79.120 Word Count Estimation: 18,14 Date of Issue: 2024-03-15 Date of Implementation: 2024-10-01 Older Standard (superseded by this standard): GB/T 5856-1999 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 5856-2024: Wood based panel machinery - General specifications of the hot press---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 79.120 CCSB97 National Standards of People's Republic of China Replace GB/T 5856-1999 General technical requirements for mechanical hot presses for wood-based panels Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 5856-1999 "General Technical Requirements for Hot Presses". Compared with GB/T 5856-1999, except for structural adjustments and In addition to editorial changes, the main technical changes are as follows. --- Changed the scope of application of hot press (see Chapter 1, Chapter 1 of the.1999 edition); --- Added terminology (see Chapter 3); --- Added a simplified diagram (see Chapter 4); --- Changed the main parameters (see Chapter 5, Chapter 3 of the.1999 edition); --- Deleted the hot press plunger series (see Chapter 4 of the.1999 edition); --- Changed the general requirements, technical requirements for main components and assembly technical requirements, and added corresponding inspection methods (see 6.1, 6.2, 6.3, Chapter 6 of the.1999 edition); --- Added safety protection requirements (see 6.4); --- Changed the geometric accuracy requirements, working accuracy requirements and corresponding inspection methods, and added a column for inspection tools (see 6.5, 6.6, Chapter 5 of the.1999 edition); --- Changed the requirements for idling test and load test, and deleted the requirements for accuracy test (see 6.7, 6.8, Chapter 7 of the.1999 edition); --- Changed the content of the inspection rules (see Chapter 7, Chapter 8 of the.1999 edition); --- Changed the contents of labeling, packaging and storage (see Chapter 8, Chapter 9 of the.1999 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the State Forestry and Grassland Administration. This document is under the jurisdiction of the National Technical Committee for Standardization of Wood-Based Panel Machinery (SAC/TC66). This document was drafted by. Suzhou Sufuma Machinery Co., Ltd., Shanghai Wood-Based Panel Machinery Factory Co., Ltd., China Forestry Research Institute Wood Industry Research Institute, Zhenjiang Zhongfuma Machinery Co., Ltd., Suzhou Huaxiang Wood Industry Machinery Co., Ltd., Shanxi Qiulin Machinery Co., Ltd. Linyi City Xintianli Machinery Co., Ltd. The main drafters of this document are. Shen Wenrong, Liu Guangxin, Li Shaokun, Yan Chenglin, Zhang Wenda, Wang Xueping, Yang Yongzhong, Xu Kai, Li Yongqing, Tang Qi, Ren Yusheng, Zhang Yaosheng, Wang Qi, and Liu Zixin. The previous versions of this document and the documents it replaces are as follows. ---First published in 1986 as GB/T 5856-1986 "Precision of hot presses"; ---First revised in.1999, incorporating GB/T 5857-1986 "Technical Requirements for Manufacturing and Acceptance of Hot Presses" and Contents of GB/T 1571-1988 "Multilayer hot press parameters"; ---This is the second revision. General technical requirements for mechanical hot presses for wood-based panels1 ScopeThis document specifies the main parameters, requirements, inspection methods, marking, packaging and storage of mechanical hot presses for wood-based panels (referred to as hot presses). This document is applicable to single-layer and multi-layer hot presses for producing plywood, fiberboard, particleboard, veneer, honeycomb board and other man-made panels.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 191 Pictorial markings for packaging, storage and transportation GB/T 1184-1996 Shape and position tolerances without tolerance values GB/T 1800.1-2020 Geometrical product specifications (GPS) - Linear dimension tolerances - ISO code system - Part 1.Tolerances, deviations The basis of difference and coordination GB 2894 Safety signs and their use guidelines GB/T 3181 Paint film color standard GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components GB/T 5226.1 Electrical safety of machinery Electrical equipment of machinery Part 1.General technical requirements GB/T 7932 General rules and safety requirements for pneumatic systems and their components GB/T 11337 Flatness error detection GB/T 13306 Labels GB/T 13384 General technical requirements for packaging of electromechanical products GB/T 18262 General technical requirements for wood-based panel machinery GB T18263 Terminology of mechanical hot press for wood-based panels GB/T 18514 General safety rules for wood-based panel machinery GB/T 20801.1 Pressure piping specification Industrial piping Part 1.General GB/T 25375 Inspection and evaluation of the color coating method for the joint surfaces of metal cutting machine tools JB/T 9953 Measurement method for sound pressure level of woodworking machine tools LY/T 1004 Technical requirements for hot press plates LY/T 1454 General rules for mechanical precision inspection of wood-based panels NB/T 47013.3-2015 Nondestructive testing of pressure equipment Part 3.Ultrasonic testing QB/T 1588.4 General technical requirements for painting of light industrial machinery3 TerminologyThe terms and definitions defined in GB/T 18263 apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5856-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 5856-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5856-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5856-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5856-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5856-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
