GB/T 5668-2017 English PDFUS$339.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5668-2017: Rotary tiller Status: Valid GB/T 5668: Historical versions
Basic dataStandard ID: GB/T 5668-2017 (GB/T5668-2017)Description (Translated English): Rotary tiller Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B91 Classification of International Standard: 65.060.20 Word Count Estimation: 17,151 Date of Issue: 2017-09-29 Date of Implementation: 2018-04-01 Older Standard (superseded by this standard): GB/T 5668-2008 Regulation (derived from): National Standard Announcement 2017 No. 23 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 5668-2017: Rotary tiller---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Rotary tiller ICS 65.060.20 B91 National Standards of People's Republic of China Replacing GB/T 5668-2008 Rotary machine Rotarytiler 2017-09-29 Posted 2018-04-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 5668-2008 "Rotary Tiller." This standard compared with GB/T 5668-2008, in addition to editorial changes outside the main technical changes are as follows. --- Modify the scope of the provisions (see Chapter 1,.2008 edition of Chapter 1); --- Added terminology (see Chapter 3); --- Modify the type, model representation (see 4.1 and Chapter 5,.2008 version 3.1 and Chapter 4); --- Modify the vegetation coverage performance index (see 6.1.1 Table 2,.2008 version 5.1.1 in Table 2); --- Modify the performance index of groundbreaking rate (see Table 1 in 6.1.1, Table 2 in 5.1.1 of.2008); --- Modify the average technical indicators of the time between failures (see 6.1.2 Table 3,.2008 version 5.1.2 in Table 3); --- Modify the security requirements (see Chapter 7, Chapter 8 of the.2008 edition); --- Modify the instructions for use (see 10.1,.2008 version 9.1); --- Removed the calculation method of soil bulk and softness (see.2008 version 7.1.3.6); --- Removed the expression of slip rate (see.2008 version 7.1.4.3); --- Modify the reliability assessment methods (see 8.1.2.1,.2008 edition of 7.2.1); --- Increased idling torque test method (see 8.3.3); --- Increasing the tightening torque of the bolt connection normative appendix (see Appendix A). This standard is proposed by the China Machinery Industry Federation. This standard by the National Agricultural Machinery Standardization Technical Committee (SAC/TC201). This standard was drafted by the Ministry of Agriculture, Nanjing Institute of Agricultural Mechanization, Machinery Industry Tillage Machinery Product Quality Testing Center, Henan Haofeng Machinery Manufacturing Co., Ltd., Inner Mongolia Changming Machinery Co., Ltd., Hebei double days Machinery Manufacturing Co., Ltd., Xi'an, Australia and Macao Agricultural Machinery Co., Ltd. Limited company, Jiangsu Qinghuai Machinery Co., Ltd. The main drafters of this standard. Ding Yan, Zhu Jiping, Yuan Dong, Yao Keheng, Chen Wei, Xia Min, Sun Lijuan, Peng Zhuomin, Zhang Huanqing, Zhang Ming, Lu Zhanxi, Wang Qiang, Liu Zhenggang. This standard replaces the standards previously issued as. --- GB 5668.1-1985, GB 5668.2-1985, GB 5668.3-1985; --- GB/T 5668.1-1995, GB/T 5668.3-1995; --- GB/T 5668-2008. Rotary machine1 ScopeThis standard specifies the type of rotary tiller, the basic parameters, technical requirements, safety requirements, test methods, inspection rules, instructions, standard Log, packaging, transportation and storage. This standard applies to tractors (except tractors) supporting horizontal dry tiller. Rotary rotary joint part of the rotary machine can be Refer to the implementation.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 3098.1 fasteners mechanical properties of bolts, screws and studs GB/T 3098.2 fasteners mechanical properties of nuts GB/T 5263 tractors and mechanical and agricultural tractor output shaft joint protective cap strength and wear test and acceptance criteria GB/T 5667 Agricultural machinery production test methods GB/T 5669 Rotary knife and knife holder GB/T 9480 agriculture and forestry tractors and machinery, lawn and garden power machinery manual preparation rules Safety of agriculture and forestry machinery - Part 1. General rules of GB 10395.1-2009 Agricultural and forestry machinery safety - Part 5. Powered farming machinery GB 10396 Tractors and machinery for agriculture and forestry, lawn and garden machinery safety signs and dangerous graphics General GB/T 17126.1 Agricultural tractors and mechanical power output universal joint drive shaft and power input connecting device Part 1. Pass With manufacturing and safety requirements GB/T 17126.2 Agricultural tractors and mechanical power output universal joint drive shaft and power input connecting device Part 2. Moving Force output universal joint drive shaft specifications, various types of coupling device with power output drivetrain and power input connection device position and clearance range GB/T 24648.2 Engineering Machinery Products Reliability Assessment Index System and Fault Classification General Cleanliness of Gear Units JB/T JB/T 8574 agricultural machinery product model rules JB/T 9832.2 Tractors and machinery of agriculture and forestry - Determination of adhesion of paint films - Compression method3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Vegetation coverage vegetationcoverage Per unit area of plow covered in soil after vegetation accounted for the proportion of surface vegetation. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5668-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 5668-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5668-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5668-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5668-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5668-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
