GB/T 5654-2007 English PDF

US$374.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5654-2007: Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity
Status: Valid

GB/T 5654: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5654-2007	374	Add to Cart	3 days	Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity	Valid
GB/T 5654-1985	439	Add to Cart	4 days	Measurement of relative permittivity, dielectric dissipation factor at power frequency and volume resistivity of insulating liquids	Obsolete

Similar standards

GB/T 4207   GB/T 5591.2   GB/T 5591.1   GB/T 5132.4   GB/T 6553   GB/T 5132.3   

Basic data

Standard ID: GB/T 5654-2007 (GB/T5654-2007)
Description (Translated English): Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K15
Classification of International Standard: 29.035.99
Word Count Estimation: 19,198
Date of Issue: 2007-12-03
Date of Implementation: 2008-05-20
Older Standard (superseded by this standard): GB/T 5654-1985
Adopted Standard: IEC 60247-2004, IDT
Regulation (derived from): China Announcement of Newly Approved National Standards No. 12 of 2007 (No. 112 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the test temperature of liquid insulating material dielectric loss factor and relative permittivity and DC resistivity measurement method. This standard is not used as a reference test liquid, but also applies to the operation of the transformers, cables and other electrical equipment in the liquid. However, this standard applies only to single-phase liquid, as a routine method of measurement can be made to simplify the method described in Appendix C and. For non- hydrocarbon insulating liquids, require the use of other cleaning methods.

GB/T 5654-2007: Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor and dcresistivity ICS 29.035.99 K15 National Standards of People's Republic of China GB/T 5654-2007/IEC 60247.2004 Replacing GB/T 5654-1985 Liquid Insulation Materials Relative permittivity, dielectric loss factor And measure the DC resistivity (IEC 60247.2004, IDT) Posted 2007-12-03 2008-05-20 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with 60247 IEC .2004 "to measure the liquid insulating material of relative permittivity, dielectric dissipation factor and dc resistivity Amount "(in English). For ease of use, this standard made the following editorial changes. a) use the decimal symbol '. 'Decimal symbol instead of' '; b) "this International Standard" be replaced by "this standard"; This standard replaces GB/T 5654-1985 "liquid insulating material frequency relative permittivity, dielectric loss tangent and volume resistivity measuring". The main changes compared to 5654-1985 standard and GB/T as follows. a) The increase in the standard "Introduction" and "Normative References" section; b) DC resistivity measurements, the "liquid withstand the test voltage 200V ~ 300V/mm" to "test voltage should be Liquid withstand 250V/mm "; the power of time" 60s "to" 60s ± 2s "; the" Note the sample 15min after the start of measurement Quantity "to" no more than 10min Start Measurement "; c) This standard increased the Figs. 2, 3, 4, 5 in FIG. This standard Annex A, Annex B, Annex C is informative appendix. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized. This standard was drafted. Guilin Institute of Electrical Science. The main drafters of this standard. Wang Xianfeng. This standard previously issued as follows. --- GB/T 5654-1985. GB/T 5654-2007/IEC 60247.2004

Introduction

Health and safety. Warning. This standard does not address all the safety problems associated with the use of the use of this standard has the responsibility to establish appropriate health and safety Rules and prior to use is determined by the scope of application of the rules of limitation. surroundings. This standard will result in some of the insulating liquid, chemicals, used oil contaminated solids in the sample container and other issues, these items Disposal of the relevant regulations should be to reduce the environmental impacts and hazards, and should be ready every precaution to prevent these fluids due to desertion polluted environment. GB/T 5654-2007/IEC 60247.2004 Liquid Insulation Materials Relative permittivity, dielectric loss factor And measure the DC resistivity

1 Scope

This standard specifies the method for measuring the dielectric loss factor at the test temperature of the liquid insulating material, the relative permittivity and dc resistivity. This standard is not used as a reference test liquid, but also applies to the operation of transformers, cables and other electricians set Preparation of liquid. However, this standard applies only to single-phase liquid, and can be used to simplify the method described in Appendix C when measured as a routine method. For non-insulated liquid hydrocarbons, it requires the use of other cleaning methods.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1409-2006 solid insulating materials at power, audio, high-frequency (including meter wavelengths included) of the permittivity and dielectric loss due to Number recommended method (IEC 60250. 1969, MOD) GB/T 1410-2006 solid insulating material volume resistivity and surface resistivity test methods (IEC 60093. 1980, IDT) GB/T 21216-2007 insulating liquid measuring conductance and capacitance - Test methods for determining dielectric loss factor (IEC 61620.1998, IDT) IEC 60475 method for sampling liquid dielectrics

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 The relative permittivity of the insulating material is filled with all the insulating material surrounding a capacitor between the two electrodes and two electrodes having a capacitance In a vacuum electric capacity ratio of the amount of C0 Cx similar electrode structure. The air electrode is used in place of the capacitance Ca C0, for the measurement of relative permittivity with sufficient accuracy. 3.2 Insulation material dielectric loss factor (tanδ) is the loss tangent of the angle. When the capacitor dielectric insulating material composed of only one loss phase angle refers to the applied voltage and the resulting current between Deviates from π radian/2. Note. The actual applications, tanδ measured value is less than 0.005, tanδ and power factor (PF) is substantially the same. Available a simple formula for converting the two into Line conversion. Power factor is the relationship between the loss sine of the angle, power factor and dielectric loss factor can be expressed among the following formula. PF = tanδ 1+ (tanδ) Sang 2 (1) GB/T 5654-2007/IEC 60247.2004 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5654-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5654-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5654-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5654-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5654-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5654-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.