GB/T 5213-2019 PDF EnglishUS$135.00 · In stock · Download in 9 seconds
GB/T 5213-2019: Cold rolled low carbon steel sheet and strip Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 5213: Historical versions
GB/T 5213-2019: Cold rolled low carbon steel sheet and strip---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT5213-2019NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.140.50 H 46 Replacing GB/T 5213-2008 Cold rolled low carbon steel sheet and strip Issued on. MARCH 25, 2019 Implemented on. FEBRUARY 1, 2020 Issued by. State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Classification and designation... 5 4 Ordering content... 7 5 Dimensions, shape and weight... 7 6 Technical requirements... 7 7 Test methods... 10 8 Inspection rules... 11 9 Packaging, marking and quality certification... 11 Annex A (Informative) Chemical components of steel... 12 Annex B (Informative) Cross-reference of similar domestic and foreign designations... 13ForewordThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 5213-2008, Cold rolled low carbon steel sheet and strip. Compared with GB/T 5213-2008, in addition to editorial changes, the major technical changes are as follows. -- it changes the scope of application and the range of nominal thickness (see Clause 1; Clause 1 of 2008 edition); -- it changes the lower limit requirements for the tensile strength of designation DC06 (see Table 4; Table 4 of 2008 edition); -- in accordance with the divisions of different class intervals of nominal thickness, it adds the requirements for percentage elongation after fracture (see Table 4); -- it adds the requirements for the tensile strain mark surface quality assurance of the FC surface of designation DC01 (see Table 5); -- it adds the requirements for “surface quality”, “dimensions” and their corresponding test methods in the inspection items of Table 7 (see Table 7); -- it changes the requirements for the reference values of some chemical components in Annex A (see Annex A; Annex A of 2008 edition); -- it changes the cross-reference table of similar domestic and foreign designations in Annex B (see Annex A; Annex A of 2008 edition). This Standard was proposed by the China Iron and Steel Association. This Standard shall be under the jurisdiction of National Technical Committee 183 on Steels of Standardization Administration of China (SAC/TC 183). The drafting organizations of this Standard. Baoshan Iron and Steel Co., Ltd., China Metallurgical Information and Standardization Institute, Jiangsu Shagang Group Co., Ltd., Zhangjiagang Yangtze Cold Rolled Sheet Co., Ltd., Shandong Taishan Iron and Steel Group Co., Ltd., Guangxi Liuzhou Iron and Steel Group Co., Ltd. The main drafters of this Standard. Zhu Yan, Yuan Min, Li Qian, Li Ran, Nie Wenjin, Hu Yanhui, Huang Yanfei, Chen Hai, Tu Shulin, Zhang Weixu, Li Xiaobo, Zhao Qishao, Wu Yuhong, Deng Shen, Hu Ling, Huang Jinhua, Hou Jie, Xu Qing. The previous editions of the standard replaced by this Standard are as follows. -- GB/T 5213-1985, GB/T 5213-2001, GB/T 5213-2008. Cold rolled low carbon steel sheet and strip1 ScopeThis Standard specifies the terms and definitions, classification and designation, ordering content, dimensions, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certification of cold rolled low carbon steel plates (sheets) and strips.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition dated applies to this document. For undated references, the latest edition of the referenced documents (including all amendments) applies to this document. GB/T 223.9, Iron steel and alloy – Determination of aluminium content – Chrome azurol S photometric method GB/T 223.16, Methods for chemical analysis of iron, steel and alloy – The chromotropic acid photometric method for the determination of titanium content GB/T 223.40, Methods for chemical analysis of iron, steel and alloy – The anion- exchange separation-sulphochlorophenol S photometric method for the determination of niobium content GB/T 223.59, Iron, steel and alloy – Determination of phosphorus content – Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method GB/T 223.63, Methods for chemical analysis of iron, steel and alloy – The sodium (potassium) periodate photometric method for the determination of manganese content3 Classification and designation3.1 Classification 3.1.1 For the classification of steel plates (sheets) and strips by use see Table 1. 3.1.2 For the classification of steel plates (sheets) and strips by surface quality see Table 2. 3.1.3 For the classification of steel plates (sheets) and strips by surface structure see Table 3 3.2 Designation Designation of steel plates (sheets) and strips consists of three parts, including. the first part is letter “D”, representing steel plates (sheets) for cold forming; the second part is letter “C”, representing that it is cold rolling; the third part is a two-digit serial number, i.e. 01, 03, 04, etc.4 Ordering content4.1 Contracts or orders based on this Standard shall include the following contents. 4.2 If the information is not indicated in contracts, such as dimensions and roughness accuracy, surface quality grade, surface structure type, rim condition and packaging, the supplier shall supply goods in accordance with common dimensions and roughness accuracy, relatively high-grade surface, pitted surface structure and trimming state, and packaging method of the supplier.5 Dimensions, shape and weightThe dimensions, shape, weight and tolerances of steel plates (sheets) and strips shall be as specified in GB/T 708.6 Technical requirements6.1 Chemical components For the reference values of steel chemical components (by smelting analysis) see Annex A. If the purchaser has any requirement for chemical components, it shall be as agreed on when an order is placed. For the cross-reference table of similar domestic and foreign standard designations refer to Annex B. 6.2 Smelting method Steel used for steel plates (sheets) and strips is smelted using an oxygen converter or electrical furnace; the smelting method is to be selected by the supplier. 6.3 Delivery condition 6.3.1 Steel plates and sheets are delivered in the condition of temper rolling after annealing. 6.3.2 Steel plates (sheets) and strips are usually delivered coating with oil; oil film coated can be removed using aqueous alkali or common solutions; under common packaging, transportation, handling and storage conditions, the supplier shall ensure that, within 6 months after the date of manufacture, steel plates (sheets) and strips does not rust. 6.4 Mechanical properties Mechanical properties of steel plates (sheets) shall be as specified in Table 4. 6.5 Tensile strain marks Tensile strain marks of steel plates (sheets) and strips shall be as specified in Table 5. 6.6 Surface quality 6.7 Surface structure When surface structure is of a pitted surface (D), the target value of average roughness Ra is greater than 0.6 μm but not greater than 1.9 μm; when surface structure is of a glossy surface (B), the target value of average roughness Ra is not greater than 0.9 μm. If the purchaser has special requirements for roughness, they shall be as agreed on during ordering.7 Test methods7.1 Chemical composition test of steel is usually carried out as specified in GB/T 4336, GB/T 20123, GB/T 20125 and GB/T 20126, or general chemical analysis methods; arbitration shall be carried out as specified in GB/T 223.9, GB/T 223.16, GB/T 223.40, GB/T 223.59, GB/T 223.63 and GB/T 20125. 7.2 The inspection items and test methods of steel plates (sheets) and strips shall be as specified in Table 7. 7.3 r90 is calculated at 15% of strain; when average elongation is less than 15%, strain is calculated at the end of average elongation.8 Inspection rules8.1 Inspection and acceptance of steel plates (sheets) and strips shall be carried out by the inspection department of the supplier. 8.2 Steel plates (sheets) and strips shall be accepted by batch. Each batch for inspection shall consist of steel plates (sheets) and strips of same designation, same specification and same processing condition. Weight of each batch shall not be greater than 30 t; for steel strips with a coil weight greater than 30 t, each coil is a batch for inspection. 8.3 Sample numbers and sample methods of steel plates (sheets) and strip shall be as specified in Table 7. 8.4 Reinspection and criteria for steel plates (sheets) and strips shall be as specified in GB/T 17505. 8.5 Test results of chemical components and mechanical properties shall be rounded off using the rounded-off value comparison method; the rules for rounding off shall be as specified in GB/T 8170.9 Packaging, marking and quality certificationPackaging, marking and quality certification of steel plates (sheets) and strips shall be as specified in GB/T 247.If the purchaser has special requirements for packaging, they shall be as agreed on during ordering.Annex A(Informative) Chemical components of steel Table A.1 gives the reference values of chemical components of steel (by smelting analysis).Annex B(Informative) Cross-reference of similar domestic and foreign designations Table B.1 – Cross-reference of similar domestic and foreign designations This Standard ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 5213-2019 be delivered?Answer: The full copy PDF of English version of GB/T 5213-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 5213-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5213-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 5213-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 5213-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5213-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 5213-2019?A step-by-step guide to download PDF of GB/T 5213-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 5213-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
