GB/T 5132.5-2009 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5132.5-2009: Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5132.5-2009	114	Add to Cart	3 days	Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods	Valid

Similar standards

GB/T 4207   GB/T 5591.2   GB/T 5591.1   GB/T 5132.4   GB/T 5132.3   GB/T 5132.2   

Basic data

Standard ID: GB/T 5132.5-2009 (GB/T5132.5-2009)
Description (Translated English): Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K15
Classification of International Standard: 29.035.99
Word Count Estimation: 6,665
Date of Issue: 2009-06-10
Date of Implementation: 2009-12-01
Older Standard (superseded by this standard): GB/T 5133-1985
Quoted Standard: GB/T 5132.1-2009; GB/T 5132.2-2009; ISO 472
Adopted Standard: IEC 61212-3-3-2006, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the different resins and reinforcing materials for electrical industrial rigid round laminated molded rods classification and requirements. Molded rods Scope and identify the characteristics specified in Table 1. This section applies to electrical use Industrial rigid round laminated molded rods.

GB/T 5132.5-2009: Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 5: Round laminated moulded rods

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes.Part 5. Round laminated moulded rods ICS 29.035.99 K15 National Standards of People's Republic of China GB/T 5132.5-2009/IEC 61212-3-3.2006 Replacing GB/T 5133-1985 Thermosetting resins for electrical industrial rigid round Laminated tubes and rods Part 5. Round laminated molded rods (IEC 61212-3-3.2006, Insulatingmaterials-Industrialrigid purposes-Part 3. Specificationsforindividualmaterials-Sheet3. Roundlaminatedmouldedrods, IDT) Posted 2009-12-01 2009-06-10 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 5132 "thermosetting resins for electrical industrial rigid round laminated tubes and rods" contains the following sections. --- Part 1. General requirements; --- Part 2. Test methods; --- Part 3. Round laminated rolled tube; --- Part 4. Round laminated molded tubes; --- Part 5. Round laminated molded rods. This section GB/T 5132 Part 5. This section identical with IEC 61212-3-3.2006 section "Electrical thermosetting resins for industrial rigid round laminated tubes and rods 3. Single Materials Specifications Item 3. Round laminated molded rods "(in English). This part of IEC 61212-3-3.2006 compared to do the following editorial changes. the "Round Table 1 molded bar type" write into Chapter 3, "naming and classification". This Part replaces GB/T 5133-1985 "laminated rod." This part of GB/T 5133-1985 difference is as follows. a) In this section "preface" listed on thermosetting resins for electrical Industrial rigid round laminated tubes and rods composed of standard series section; b) Information about the laminated rods "name constitute", "Resin Type" and "reinforcing material types" in Chapter 4, "Nomenclature and Classification" in Detailed provisions, and in accordance with IEC included in all models bar laminate and delete the original domestic model; c) Remove the GB/T 5133-1985 in length and deviation requirements; d) increasing the "insulation resistance after immersion in water", "long-term heat resistance," and "burning" of the performance requirements; e) Remove the GB/T 5133-1985 in on "test methods" are described as a chapter number corresponding clauses included in this section in Table 4 "Round Molded rod performance requirements ", delete the" inspection rules, marking, packaging, transport and storage "chapter. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee of the insulating material (SAC/TC51) centralized. This part mainly drafted by. East wood Technology Group Co., Ltd., Beijing Fu Runda New Insulation Materials Co., Ltd., Xi'an Electric Power Engineering Materials Co., Ltd., Guilin Institute of Electrical Science. The main drafters of this section. Xuemin, Zhao Ping, Liu Qihuan, Du Chaoyun. This part of the standard replaces the previous editions are. --- GB/T 5133-1985. GB/T 5132.5-2009/IEC 61212-3-3.2006 Thermosetting resins for electrical industrial rigid round Laminated tubes and rods Part 5. Round laminated molded rods

1 Scope

This section GB/T 5132 specifies the electrical and reinforced with different resin material from industrial rigid round laminated molded rods classification And requirements. Molded rods scope and identification features specified in Table 1. This section applies to electric using industrial rigid round laminated molded rods.

2 Normative references

The following documents contain provisions which, through reference to GB/T 5132 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Part of GB/T 5132.1-2009 thermosetting resins for electrical Industrial rigid round laminated tubes and rods 1. General requirements (IEC 61212-1.2006, IDT) GB/T 5132.2-2009 thermosetting resins for electrical Industrial rigid round laminated tubes and rods - Part 2. Test methods (IEC 61212-2.2006, IDT) ISO 472 Plastics Glossary

3 Terms and Definitions

ISO 472 as required following terms and definitions apply to this section. 3.1 In die winding impregnated material layer die off after cured under heat and pressure in a cylindrical mold and then grinding to Regulation Sized formation of a stick.

4 Nomenclature and Classification

4.1 Overview Molded rod according to different resins are employed, reinforcing material, manufacturing method and identification features into different models. 4.2 Naming Are named as follows. --- In the first two initials indicate resin; --- In the next two-letter abbreviation for the reinforcing material; --- Serial number to two digits. The first number indicates the shape of the product, "4" indicates molded rods, the second number indicates the same A different type of reclassification. Acronym provisions by 4.3. Molded rods name is represented by the following. GB/T 5132.5-2009/IEC 61212-3-3.2006 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5132.5-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5132.5-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5132.5-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5132.5-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.