GB/T 42614-2023 English PDF

US$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42614-2023: Plain bearings - Metallic thin-walled half bearings without flange - Determination of the σ0.01*-limit
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 42614-2023	179	Add to Cart	3 days	Plain bearings - Metallic thin-walled half bearings without flange - Determination of the σ0.01*-limit	Valid

Similar standards

GB/T 42613   GB/T 39333   GB/T 37677   GB/T 14910   

Basic data

Standard ID: GB/T 42614-2023 (GB/T42614-2023)
Description (Translated English): Plain bearings - Metallic thin-walled half bearings without flange - Determination of the ��0.01*-limit
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J12
Classification of International Standard: 21.100.10
Word Count Estimation: 8,815
Date of Issue: 2023-05-23
Date of Implementation: 2023-12-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 42614-2023: Plain bearings - Metallic thin-walled half bearings without flange - Determination of the σ0.01*-limit

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 21:100:10 CCSJ12 National Standards of People's Republic of China Sliding bearing metal flangeless thin-walled bearing bush Determination of σ*0:01 limit value Determination of the σ*0:01-limit (ISO 6282:2018, Plainbearings-Metalicthin-waledhalfbearings- Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standard Documents" drafting: This document is modified to adopt ISO 6282:2018 "Determination of σ*0:01 Limit Value of Sliding Bearing Metal Thin-walled Bearing": The technical differences between this document and ISO 6282:2018 and their reasons are as follows: --- Added the limitation of "no flange" in the scope to solve the problem that this method is not applicable to thin-walled bearing bushes with flanges; ---Changed the requirements for test presses, measuring equipment, inspection molds, and standard tiles (see Chapter 4) in order to be consistent with GB/T 7308:3 For supporting use, the normative reference document GB/T 7308:3 is added in Chapter 4; --- Changed the content about lubricant cleaning on the bearing surface (see Chapter 5) to improve measurement accuracy; --- Increased the provisions of parallelism of the sample mating surface (see Chapter 5) to ensure uniform compression and improve measurement accuracy: The following editorial changes have been made to this document: ---Changed the symbols of the cross-sectional area of the bearing pad, the width of the bearing pad, the thickness of the steel back and the alloy layer, and the measurement diameter of the inner hole of the inspection die, so as to be consistent with Supporting use of GB/T 7308 series standards; --- Added the matters needing attention in the sample preparation process: Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Standardization Technical Committee for Sliding Bearings (SAC/TC236): This document is drafted by: China Machinery Productivity Promotion Center Co:, Ltd:, Yantai Dafeng Bearing Co:, Ltd:, Zhejiang Changsheng Sliding Bearings Co:, Ltd:, Zhejiang Shuangfei Oil-free Bearing Co:, Ltd:, Jiaxing Maiteer Baoxin Machinery Industry Co:, Ltd:, Jiashan Sanplex Sliding Shaft Cheng Co:, Ltd: Sliding bearing metal flangeless thin-walled bearing bush Determination of σ*0:01 limit value

1 Scope

This document describes the method for the determination of the limit value of σ*0:01 for multilayer metal flangeless thin-walled bearing shell steel backs: This document applies to multi-layer metal flangeless thin-walled bearings with an outer diameter Do≤80mm, and can also be used for bearings with an outer diameter Do≤160mm:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 7308:3 Sliding bearings with flanges or flangeless thin-walled bearings Part 3: Measurement of circumference (GB/T 7308:3- 2021, ISO 3548-3:2012, MOD)

3 Terms and Definitions

The following terms and definitions apply to this document: 3:1 σ*0:01 limit value σ*0:01-limit Circumferential compressive stress that causes 0:01% permanent deformation on the circumference of the bearing bush: Note: Due to the difference between the bearing pad and the general compression test sample in geometric shape and detection loading method, the limit value of σ*0:01 is different from the limit value of σ0:01: In order to distinguish, the bearing pad The σ0:01 limit values are marked with an asterisk (*): 3:2 F/Acal The ratio of the normal pressure (vertical load) (F) applied to the cross-sectional area of the bearing pad to the cross-sectional area (Acal) obtained by calculation: Note 1: The unit of F is Newton (N), the unit of Acal is square millimeter (mm2), and the unit of F/Acal is megapascal (MPa), that is, Newton per square millimeter (N/mm2): Note 2: For the most common material combinations, the calculation of the cross-sectional area (Acal) refers to GB/T 7308:1, and the calculation formula is as follows: Steel/lead-based alloy or steel/tin-based alloy: Acal=B1×s1 Steel/copper base alloy: Acal=B1×s1 s2 Steel/aluminum base alloy: Acal=B1×s1 s2 In the formula: B1 --- bearing width, in millimeters (mm); s1 --- the thickness of the steel back layer of the bearing bush, in millimeters (mm); s2 --- The thickness of the alloy layer of the bearing bush, in millimeters (mm): Note 3: If the annular oil groove and (or) the chamfer extends to the steel back layer, the cross-sectional area of the steel back is reduced accordingly for calculation: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 42614-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 42614-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 42614-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 42614-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.