GB/T 42595-2023 English PDF

US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42595-2023: Basic requirements for repair of pressure equipment
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 42595-2023	519	Add to Cart	5 days	Basic requirements for repair of pressure equipment	Valid

Similar standards

GB/T 42626   GB/T 42536   GB/T 42612   GB/T 45439   GB/T 42605   

Basic data

Standard ID: GB/T 42595-2023 (GB/T42595-2023)
Description (Translated English): Basic requirements for repair of pressure equipment
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J74
Classification of International Standard: 23.020.30
Word Count Estimation: 25,294
Date of Issue: 2023-05-23
Date of Implementation: 2023-05-23
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 42595-2023: Basic requirements for repair of pressure equipment

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 23:020:30 CCSJ74 National Standards of People's Republic of China Basic requirements for pressure equipment repair Released on 2023-05-23 2023-05-23 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Repair Category 2 5 Basic Requirements 2 6 Workflow 3 7 File Management 6 Appendix A (Informative) Recognition Form of Environmental Factors in Repair Construction Operation 7 Appendix B (Informative) Work Hazard Analysis Record Form for Repair Construction Work 8 Reference 21

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed and managed by the National Standardization Technical Committee of Boilers and Pressure Vessels (SAC/TC262): This document was drafted by: China Special Equipment Inspection and Research Institute, Hefei General Machinery Research Institute Co:, Ltd:, China National Petroleum Corporation Co:, Ltd: Refining and Chemical Branch, State Administration for Market Regulation, China Petrochemical Corporation, Sinopec Beijing Yanshan Petrochemical Co:, Ltd:, East China University of Science and Technology, Shanghai Special Equipment Supervision and Inspection Technology Research Institute, Sinopec Fourth Construction Co:, Ltd: Division, China Special Inspection Group Co:, Ltd: The main drafters of this document: Jiang Haiyi, Li Jun, Du Chenyang, Bu Huaquan, Xie Guoshan, Lin Zhenyu, Shi Jin, Wang Jianjun, Zhao Baocheng, Shao Shanshan, Zhao Bin, Wang Hui, Liu Changjun, Guo Guangfei, Du Yannan, Lei Gaotao, Yuan Yiwen, Kang Haoyuan, Guo Jingqian, Jia Xiaoliang: Basic requirements for pressure equipment repair

1 Scope

This document specifies the classification, basic requirements and work flow for the repair of in-service pressure equipment such as boilers, pressure vessels and pressure piping: This document is applicable to the repair of pressure-bearing equipment included in the special equipment catalogue, and the repair of pressure-bearing equipment not included in the special equipment catalogue can be implemented as a reference:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: NB/T 47013 (all parts) Non-destructive testing of pressure equipment

3 Terms and Definitions

The following terms and definitions apply to this document: 3:1 All kinds of plans to restore the safety status and functions of pressure equipment after there are potential safety hazards, technical status deterioration or failure Repair and unplanned hidden danger repair, damage repair and accident repair and other activities: 3:2 Temporary repair temporaryrepair Repair the defects and damages of the pressure-bearing equipment to maintain the safe performance of the pressure-bearing equipment within a certain period of time: Note: Temporary repair is only a temporary treatment measure for pressure-bearing equipment before overhaul: 3:3 permanent repair permanent repair Repair the defects and damages of pressure-bearing equipment to make them meet the requirements of corresponding regulations and standards, and restore them to a good state: 3:4 Welding repair weldedrepair Welding repair method is adopted for pressure equipment: Note: Welding repair methods include digging, welding casing, surfacing welding, strengthening welding and replacing pipe sections and fittings, etc: 3:5 mechanical repair mechanicalrepair Use mechanical (non-welding) repair methods for pressure equipment: NOTE: Methods of mechanical repair include replacement of pressure-containing components, freeze plugs, thread repair, mechanical clamps, pipe straightening, fastener repair in concrete, and bolt tightening: Solid etc: 3:6 Repair methods for the repair of non-metallic parts of pressure equipment: Note: Non-metal repair methods include non-metal composite material repair and non-metal lining repair of pipelines, etc: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 42595-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 42595-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 42595-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 42595-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.