GB/T 42538.1-2023 English PDFUS$379.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 42538.1-2023: Tractors for agriculture and forestry - Safety - Part 1: Standard tractors Status: Valid
Basic dataStandard ID: GB/T 42538.1-2023 (GB/T42538.1-2023)Description (Translated English): Tractors for agriculture and forestry - Safety - Part 1: Standard tractors Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: T61 Classification of International Standard: 65.060.10 Word Count Estimation: 20,289 Date of Issue: 2023-05-23 Date of Implementation: 2023-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 42538.1-2023: Tractors for agriculture and forestry - Safety - Part 1: Standard tractors---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS65:060:10 CCST61 National Standards of People's Republic of China Agriculture and Forestry Tractor Safety Part 1: Basic tractors Part 1: Standard tractors (ISO 26322-1:2008, MOD) Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document is part 1 of GB/T 42538 "Safety of Agricultural and Forestry Tractors": GB/T 42538 has issued the following parts: --- Part 1: Basic tractors; --- Part 2: Narrow track and small tractors: This document is modified to adopt ISO 26322-1:2008 "Safety of agricultural and forestry tractors - Part 1: Basic tractors": The technical differences between this document and ISO 26322-1:2008 and their reasons are as follows: --- Replaced ISO 12100-1:2003 (see 4:1:1) with the normative reference GB/T 15706-2012 to adapt to the technology of our country conditions, increasing operability; --- Replaced ISO 5131 (see 4:2:1) and ISO 7216 (see 4:2:2) with the normatively quoted GB/T 3871:8 to adapt to our country Technical conditions, increase operability; --- Replaced ISO 15077 (see 4:3:1:1, 4:3:2:2) with the normatively quoted GB/T 20341 to adapt to the technical requirements of our country pieces to increase operability; --- Replaced ISO 4254 (see 4:3:1:2, 4:4:2:1) with the normatively quoted GB/T 6238 to adapt to my country's technical conditions, adding Increase operability; --- Changed the maximum height from the ground of the installation position of the external control device (see 4:3:3:2, 4:3:4:1), in order to facilitate the operation of domestic tractors author uses; --- ISO 3776-1, GB/T 33641:2 replaced ISO 3776-2, GB/T 33641:3 replaces ISO /OECD3776-3 (see 4:4:3) to adapt to my country's technical conditions and increase operability; --- Replaced ISO 23205 (see 4:4:4) with the normatively quoted GB/T 24660:2 to adapt to the technical conditions of our country and increase the available operability; --- Replaced ISO 3795 (see 4:4:5) with the normatively quoted GB/T 20953 to adapt to my country's technical conditions and increase operability active; --- ISO 500-1, GB/T 10916 replaced ISO 8759-1 (see 4:5) with the normatively quoted GB/T 1592:1, to Adapt to the technical conditions of our country and increase operability; --- Replaced ISO 4413 (see 4:8:1) with the normatively quoted GB/T 3766 to adapt to my country's technical conditions and increase operability active; ---Replace ISO 5700, GB/T 7121:2 replace ISO 3463 with normative reference GB/T 7121:1 (See 4:12:1) to adapt to the technical conditions of our country and increase operability; --- Added normative references to GB/T 24644 (see 4:13), and added test procedures and specifications for tractor falling object protection devices Specific provisions that may be required to complete the safety provisions of this document; --- Replaced ISO 10998 (see 4:16) with the normatively quoted GB/T 19040 to adapt to the technical conditions of our country and increase the operability active; --- Replaced ISO 3600 (see 5:1:2) with the normatively quoted GB/T 9480 to adapt to my country's technical conditions and increase operability active; --- Replaced ISO 11684 (see 5:2:2) with the normatively quoted GB 10396 to adapt to my country's technical conditions and increase operability active: The following editorial changes have been made to this document: --- Replaced ISO 26322-2 with the informative referenced GB/T 42538:2; --- Replaced ISO 5353 with the informative referenced GB/T 6236; --- Deleted redundant clause number 4:5:1; --- Replaced ISO 14982 with the informative referenced GB/T 21398; --- Deleted part of "note": Please note that some content in this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Tractor Standardization Technical Committee (SAC/TC140): This document is drafted by: China YTO Group Co:, Ltd:, Jiangsu Yueda Intelligent Agricultural Equipment Co:, Ltd:, AGCO (Changzhou) Agricultural Machinery Co:, Ltd:, Shandong Shifeng (Group) Co:, Ltd:, Luoyang Xiyuan Vehicle and Power Inspection Institute Co:, Ltd:, Ningbo Beiye Tractor Manufacturing Ltd: The main drafters of this document: Wang Dongqing, Chang Maohong, Wang Zimeng, Lin Lianhua, Jia Fang, Xue Zhifei, Liao Hanping, Yang Jisheng, Chen Song, Shi Jinzhong, Wang Hua, Wang Zhichao, Gao Fumin, Wang Shuangjian, Yang Jiafu:IntroductionTractor is a kind of agricultural machinery that completes various operations while walking, and its working parts have complex structures and harsh working environment conditions: Poor, and it is very easy to cause personal injury accidents in the process of work: The development of tractor safety requirements and standards is of great help to improve the safety technical level of tractors and reduce the The low risk of accidents and the protection of the operator's life and property have a great promotional effect: In this regard, our country through the reference, study of international standards and Foreign advanced standards, a set of safety-related standards have been established in the tractor industry, including mandatory national standards: This document transforms the International Organization for Standardization (ISO ) standards on tractor safety, aiming to help domestic tractor companies understand the international Standard regulations provide convenience for the export of tractors in our country: Tractors in my country are classified according to the rated power of the engine: International standards are carried out according to the tractor wheel base (gauge) or the minimum use quality: Therefore, GB/T 42538 divides the tractor safety requirements into the following two parts: --- Part 1: Basic tractors: The purpose is to formulate technical requirements related to safety of conventional agricultural operation tractors: --- Part 2: Narrow track and small tractors: The purpose is to develop safety-related technical regulations for narrow track tractors and small tractors: technical requirements: Agriculture and Forestry Tractor Safety Part 1: Basic tractors1 ScopeThis document specifies the general safety requirements and test verification methods for the design and manufacture of basic tractors for general purposes in agriculture and forestry: Manufacturers The type of information provided for safe operation, including residual risks, and the ways in which the operator and other workers can be raised during normal operation, use and maintenance of the tractor: Technical measures for the degree of personal safety of personnel: This document applies to tractors with the following characteristics: --- There are at least two axles to install pneumatic tires; --- The minimum value of the rear axle track (gauge) is greater than 1150mm; ---The tractor's minimum use mass is greater than 600kg: This document does not include requirements related to vibration and braking of tractors: Note: Tractors whose minimum operating mass is not greater than 600kg, and the minimum value of fixed wheel base (gauge) or adjustable wheel base (gauge) is not greater than 1150mm are safety requirements: Please refer to GB/T 42538:2:2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 1592:1 Agricultural tractor rear PTO shaft type 1, 2, 3 and 4 Part 1: General requirements, safety requirements, protection Shield size and gap range (GB/T 1592:1-2016, ISO 500-1:2014, MOD) GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components (GB/T 3766-2015, ISO 4413: 2010, MOD) GB/T 3871:8 Agricultural tractor test procedures Part 8: Noise measurement (OECDR5:2002, MOD) GB/T 6238 Agricultural tractor cab doorways, emergency exits and driver's working position dimensions (GB/T 6238-2004, ISO 4252:1992, IDT) GB/T 7121:1 Strength test methods and acceptance conditions for protective devices of agricultural and forestry wheeled tractors Part 1: Rear mounted static test Method (GB/T 7121:1-2008, ISO 5700:2006, MOD) GB/T 7121:2 Strength test methods and acceptance conditions for protective devices of agricultural and forestry wheeled tractors Part 2: Rear mounted dynamic test Method (GB/T 7121:2-2008, ISO 3463:2006, MOD) GB/T 9480 Rules for compiling instruction manuals for agricultural and forestry tractors and machinery, lawn and garden power machinery (GB/T 9480- 2001, eqvISO 3600:1996) GB 10396 Agricultural and forestry tractors and machinery, lawn and garden power machinery safety signs and hazard graphics general rules (GB 10396- 2006, ISO 11684:1995, MOD) GB/T 10916 Agricultural Wheeled Tractor Front Mounting Part 1: Power take-off shaft and three-point hitch (GB/T 10916-2003, ISO 8759-1:1998, IDT) GB/T 12265-2021 Minimum spacing for mechanical safety to prevent extrusion of various parts of the human body (ISO 13854:2017, IDT) Note: There is no technical difference between the referenced content of GB/T 12265-2021 and the referenced content of ISO 13854:1996: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42538.1-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42538.1-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 42538.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42538.1-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
