GB/T 42383.5-2023 English PDFUS$319.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 42383.5-2023: Intelligent manufacturing - Network collaborative design - Part 5: Multidisciplinary collaborative simulation Status: Valid
Basic dataStandard ID: GB/T 42383.5-2023 (GB/T42383.5-2023)Description (Translated English): Intelligent manufacturing - Network collaborative design - Part 5: Multidisciplinary collaborative simulation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N10 Classification of International Standard: 35.240 Word Count Estimation: 16,159 Date of Issue: 2023-03-17 Date of Implementation: 2023-10-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 42383.5-2023: Intelligent manufacturing - Network collaborative design - Part 5: Multidisciplinary collaborative simulation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS35:240 CCSN10 National Standards of People's Republic of China Intelligent Manufacturing Network Collaborative Design Part 5: Multidisciplinary Co-Simulation Released on 2023-03-17 2023-10-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Architecture Requirements for Multidisciplinary Co-simulation System 2 5 Technical Requirements for Multidisciplinary Co-simulation System 2 6 Functional Requirements for Multidisciplinary Co-simulation System 3 6:1 Functional Framework of Multidisciplinary Co-simulation System 3 6:2 Workflow Management 4 6:3 Simulation task management 4 6:4 Template Management 4 6:5 Simulation data management 4 6:6 Operation and maintenance management 4 7 Multidisciplinary collaborative simulation system construction 4 7:1 Overview 4 7:2 Requirements Analysis 4 7:3 Workflow management logic 4 7:4 Packaging logic 5 7:5 Data management logic 6 7:6 Distributed Computing Environment 6 7:7 System Test 6 8 Multidisciplinary collaborative simulation process construction 6 8:1 Overview 6 8:2 Multidisciplinary co-simulation process requirements 6 8:3 Multidisciplinary collaborative simulation data combing 6 8:4 Process encapsulation of multidisciplinary co-simulation 7 8:5 Integration with external systems 8 8:6 Multidisciplinary co-simulation process test 8 9 Application logic of multidisciplinary co-simulation system 8 Appendix A (Informative) Multidisciplinary Collaborative Simulation Process Requirements Carding Table Example 10 Reference 11forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document is part 5 of GB/T 42383 "Smart Manufacturing Network Collaborative Design": GB/T 42383 has issued the following part: --- Part 1: General requirements; --- Part 2: Software interface and data interaction; --- Part 4: Design requirements for the whole life cycle; --- Part 5: Multidisciplinary collaborative simulation: Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Industrial Process Measurement Control and Automation Standardization Technical Committee (SAC/TC124): This document is drafted by: Shanghai Industrial Automation Instrument Research Institute Co:, Ltd:, Shanghai Aerospace Systems Engineering Research Institute, Daqo Group Co:, Ltd: Company, China Institute of Electronic Technology Standardization, China Aviation Development Shanghai Commercial Aviation Engine Manufacturing Co:, Ltd:, SINOMACH Internet Research Institute (Henan) Co:, Ltd:, Nanjing Youbei Automation System Co:, Ltd:, Machinery Industry Instrumentation Comprehensive Technology and Economic Research Institute, Shanghai Intelligent Manufacturing Function Platform Co:, Ltd:, Kaos Industrial Intelligence Research Institute (Qingdao) Co:, Ltd:, Dongguan Institute of Technology, Shenzhen Future Intelligent Control Technology Technology Co:, Ltd:, Shenergy (Group) Co:, Ltd:, Shenyang University of Technology, Ruili Group Ruian Auto Parts Co:, Ltd:, Hangzhou Wolei Intelligent Technology Co:, Ltd: Technology Co:, Ltd:, Zhejiang Mingbo Auto Parts Co:, Ltd: The main drafters of this document: Wang Ying, Liu Jinghua, Li Shaoyang, Feng Xueqing, He Honghong, Su Qiaoling, Zhang Baogang, Zhang Aisen, Xiao Honglian, Sun Yuxin, Zhang Lingyan, Feng Xiawei, Liu Jun, Sun Ming, Zhang Zhaoyun, Wei Tiancai, Mei Jun, Fan Lingmin, Zhang Xiaoling, Dong Ying, Wang Jianing, Ouyang Wen, Zhang Zaiwei, Guo Bin, Zhou Jianbing, Zou Wei, Wang Yong:IntroductionGB/T 42383 "Smart Manufacturing Network Collaborative Design" is proposed to be composed of the following five parts: --- Part 1: General requirements: The purpose is to specify the general principles, general requirements and requirements of the network collaborative design platform: beg: It is suitable for remote design participants to develop complex product systems in the field of intelligent manufacturing with the support of the network collaborative design platform The implementation and management of collaborative design is also applicable to the establishment of a network collaborative design platform: --- Part 2: Software interface and data interaction: The purpose is to specify the software interface in the network collaborative design platform in the field of intelligent manufacturing The technical requirements that need to be met in the design of interaction with data, and the description of the software interface type and the basic protocol of data interaction are given: The software interface and data interaction framework in the design process of the network collaborative design platform suitable for complex products and equipment in the field of intelligent manufacturing structure construction and technology implementation: --- Part 3: Knowledge Base: The purpose is to specify the model and management requirements of the network collaborative design system knowledge base, knowledge base construction, Knowledge base functions and knowledge base application requirements: It is suitable for the construction, management, application and maintenance of the network collaborative design system knowledge base: --- Part 4: Design requirements for the whole life cycle: The purpose is to specify the general requirements for the design of the whole life cycle and the Life cycle collaborative design requirements and specific design requirements for each stage of product life cycle: Applicable to the complex field of intelligent manufacturing Collaborative design and management of the product system and its subsystem's full life cycle network: --- Part 5: Multidisciplinary collaborative simulation: The purpose is to specify the architecture of the multidisciplinary co-simulation system in the process of network co-design Requirements, technical requirements, functional requirements, simulation system construction, simulation process construction and system application logic, etc: for smart Multidisciplinary collaborative simulation in the process of network collaborative design in the manufacturing field, the scope of the field can include multi-field strong coupling simulation, multi-field weak coupling simulation Co-simulation and multi-disciplinary co-simulation and other fields: Intelligent Manufacturing Network Collaborative Design Part 5: Multidisciplinary Co-Simulation1 ScopeThis document specifies the architectural requirements, technical requirements, functional requirements, simulation system system construction, simulation process construction and system application logic: This document is applicable to multidisciplinary collaborative simulation in the process of network collaborative design in the field of intelligent manufacturing:2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 19000 Quality Management System Fundamentals and Terminology GB/T 42383:1-2023 Intelligent Manufacturing Network Collaborative Design Part 1: General Requirements3 Terms and DefinitionsThe following terms and definitions defined in GB/T 19000 and GB/T 42383:1-2023 apply to this document: 3:1 According to the purpose of system analysis, on the basis of analyzing the properties of each element of the system and their interrelationships, establish a system that can describe the structure or behavior of the system process, and have a certain logical or quantitative relationship between multiple disciplines or professional collaboration simulation models and simulation processes, and conduct multi-disciplinary or Professional co-simulation analysis: Note 1: Multi-disciplinary collaborative simulation includes multi-field strong coupling simulation, multi-field weak coupling simulation and multi-disciplinary joint simulation: Note 2: The multi-field strong coupling simulation is to use the multi-field coupling decoupling technology to establish a coupling simulation model in line with the product, and combine the multi-field The coupling effect of the control equation is constructed into the governing equation, and then the governing equation is directly solved to obtain the multi-field strength coupling analysis results: Note 3: The multi-field weak coupling simulation is to establish a coupling simulation model that conforms to each physical field of the product, arrange the calculation sequence of the simulation reasonably, and conduct a physical field first: Calculation, the calculation result is applied to the second physics field as an external load, and then the second physics field calculation is performed, and the calculation result is applied as an external load Back to the first physical field, through such an iteration or multiple iterations to obtain the simulation results of multi-field weak coupling: Note 4: Multi-disciplinary co-simulation is a complex system aimed at multi-disciplinary, multi-specialty engineering requirements, to establish a digital model-based, functional/performance prototype As a carrier, build a model-in-the-loop, software-in-the-loop, hardware-in-the-loop, and personnel-in-the-loop digital comprehensive simulation environment through requirements, functions, logic, and physics: Realize the verification and confirmation of functional/performance requirements in the early stages of development: 3:2 Workflow workflow It consists of a number of serial, parallel or conditional execution tasks established through process lines and data mapping relationships, usually using workflow flowcharts to show: 3:3 component component The basic component of the simulation process is the modularization of software functions, the data and methods of encapsulating the data and methods of engineering applications and software functions: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42383.5-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42383.5-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 42383.5-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42383.5-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
