GB/T 42383.1-2023 English PDFUS$379.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 42383.1-2023: Intelligent manufacturing - Network collaborative design - Part 1: General requirements Status: Valid
Basic dataStandard ID: GB/T 42383.1-2023 (GB/T42383.1-2023)Description (Translated English): Intelligent manufacturing - Network collaborative design - Part 1: General requirements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N10 Classification of International Standard: 35.240 Word Count Estimation: 19,176 Date of Issue: 2023-03-17 Date of Implementation: 2023-10-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 42383.1-2023: Intelligent manufacturing - Network collaborative design - Part 1: General requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS35:240 CCSN10 National Standards of People's Republic of China Intelligent Manufacturing Network Collaborative Design Part 1: General requirements Part 1: General requirements 2023-10-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Abbreviations 1 3:1 Terms and Definitions 1 3:2 Abbreviations 1 4 General 2 4:1 Network Collaborative Design Mode 2 4:2 Network Collaborative Design Process 2 5 General requirements 2 5:1 Design requirements 2 5:2 Collaboration requirements 3 5:3 Software interface and data interaction 5 5:4 Security 5 6 Network Collaborative Design Platform 5 6:1 Platform Architecture 5 6:2 Basic environment layer 6 6:3 Data resource layer 6 6:4 Design functional layer 7 6:5 Collaborative Management 8 Appendix A (Informative) Network Collaborative Design System Knowledge Base 11 A:1 Knowledge Base Construction 11 A:2 Knowledge base function 12 A:3 Knowledge Base Application 13 Reference 14forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document is the first part of GB/T 42383 "Smart Manufacturing Network Collaborative Design": GB/T 42383 has issued the following part: --- Part 1: General requirements; --- Part 2: Software interface and data interaction; --- Part 4: Design requirements for the whole life cycle; --- Part 5: Multidisciplinary collaborative simulation: Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Industrial Process Measurement Control and Automation Standardization Technical Committee (SAC/TC124): This document is drafted by: Shanghai Industrial Automation Instrument Research Institute Co:, Ltd:, Shanghai Aerospace Systems Engineering Research Institute, China Aviation Development Shanghai Commercial Aviation Engine Manufacturing Co:, Ltd:, China Institute of Electronic Technology Standardization, Nanjing Youbei Automation System Co:, Ltd:, Daquan Group Co:, Ltd:, SINOMACH Industrial Internet Research Institute (Henan) Co:, Ltd:, Guangzhou Energy Testing Research Institute, Machinery Industry Instrumentation Comprehensive Institute of Technology and Economics, Shanghai Intelligent Manufacturing Functional Platform Co:, Ltd:, Shenzhen Future Intelligent Control Technology Co:, Ltd:, Jiangsu Jack Instrument Co:, Ltd: Division, Shaanxi Oliver IOT Technology Co:, Ltd:, Dongguan Institute of Technology, Kaos Industrial Intelligence Research Institute (Qingdao) Co:, Ltd:, Xiamen Yudian Dynamic Technology Co:, Ltd:, Shenyang University of Technology, Shanghai Computer Software Technology Development Center, Ruili Group Ruian Auto Parts Co:, Ltd:, Hangzhou Wolei Intelligent Technology Co:, Ltd: The main drafters of this document: Wang Ying, Xiao Honglian, Li Shaoyang, Xiang Hongwei, Li Jia, Dong Jian, Xu Hui, Guan Juntao, Zhang Aisen, Sun Yuxin, Wan Yong, Feng Xiawei, Liu Jun, Wei Tiancai, Min Pei, Wu Yukun, Zhang Zhaoyun, Chen Lucheng, Su Xiaoli, Mei Jun, Dong Ying, Wang Jianing, Zhang Xiaoling, Huang Yan, Li Chuanwu, Guo Bin, Liu Jinghua, Ren Taolin:IntroductionGB/T 42383 "Smart Manufacturing Network Collaborative Design" is proposed to be composed of the following five parts: --- Part 1: General requirements: The purpose is to specify the general principles, general requirements and requirements of the network collaborative design platform: beg: It is suitable for remote design participants to develop complex product systems in the field of intelligent manufacturing with the support of the network collaborative design platform Implementation and management of collaborative design: It is also applicable to the establishment of a network collaborative design platform: --- Part 2: Software interface and data interaction: The purpose is to specify the software interface in the network collaborative design platform in the field of intelligent manufacturing The technical requirements that need to be met in the design of interaction with data, and the description of the software interface type and the basic protocol of data interaction are given: The software interface and data interaction framework in the design process of the network collaborative design platform suitable for complex products and equipment in the field of intelligent manufacturing structure construction and technology implementation: --- Part 3: Knowledge Base: The purpose is to specify the model and management requirements of the network collaborative design system knowledge base, knowledge base construction, Knowledge base functions and knowledge base application requirements: It is suitable for the construction, management, application and maintenance of the network collaborative design system knowledge base: --- Part 4: Design requirements for the whole life cycle: The purpose is to specify the general requirements for the design of the whole life cycle and the Life cycle collaborative design requirements and specific design requirements for each stage of product life cycle: Applicable to the complex field of intelligent manufacturing Collaborative design and management of the product system and its subsystem's full life cycle network: --- Part 5: Multidisciplinary collaborative simulation: The purpose is to specify the architecture of the multidisciplinary co-simulation system in the process of network co-design Requirements, technical requirements, functional requirements, simulation system construction, simulation process construction and system application logic, etc: for smart Multidisciplinary collaborative simulation in the process of network collaborative design in the manufacturing field, the scope of the field can include multi-field strong coupling simulation, multi-field weak coupling simulation Co-simulation and multi-disciplinary co-simulation and other fields: Intelligent Manufacturing Network Collaborative Design Part 1: General requirements1 ScopeThis document specifies the general principles, general requirements and requirements of the network collaborative design platform: This document is suitable for remote design participants to carry out complex product system collaboration in the field of intelligent manufacturing with the support of the network collaborative design platform: Implementation and management of the same design: This document is also applicable to the establishment of a network collaborative design platform: Note: The complex product system in this document refers to a product system composed of multiple types of parts or subsystems and involving multi-disciplinary technologies, including but not limited to aerospace Devices, aircraft, automobiles, ships, electromechanical product systems, etc:2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 24734 (all parts) technical product documentation digital product definition data general rules GB/T 37413-2019 Digital Workshop Terms and Definitions GB/T 42383:2-2023 Intelligent Manufacturing Network Collaborative Design Part 2: Software Interface and Data Interaction GB/T 42383:4-2023 Intelligent Manufacturing Network Collaborative Design Part 4: Design Requirements for the Full Life Cycle GB/T 42383:5-2023 Intelligent Manufacturing Network Collaborative Design Part 5: Multidisciplinary Collaborative Simulation 3 Terms, Definitions and Abbreviations 3:1 Terms and Definitions The following terms and definitions defined in GB/T 37413-2019 apply to this document: 3:1:1 In the environment supported by computer technology, multiple design subjects adopt appropriate design methods through a certain information exchange and mutual coordination mechanism: The process is a design method that undertakes design tasks in different aspects (scopes or domains) and jointly completes a design goal: 3:1:2 A network platform that supports multiple people to complete design projects together: 3:2 Abbreviations The following abbreviations apply to this document: BOM: Bill of Materials (BilofMaterial) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42383.1-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42383.1-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 42383.1-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42383.1-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
