GB/T 42278-2022 English PDF

US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42278-2022: Rubber, vulcanized - Determination of stress in tension upon heating
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 42278-2022	264	Add to Cart	3 days	Rubber, vulcanized - Determination of stress in tension upon heating	Valid

Similar standards

GB/T 40720   GB/T 40797   GB/T 35858   GB/T 15340   GB/T 42279   

Basic data

Standard ID: GB/T 42278-2022 (GB/T42278-2022)
Description (Translated English): Rubber, vulcanized - Determination of stress in tension upon heating
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G40
Classification of International Standard: 83.060
Word Count Estimation: 14,125
Date of Issue: 2022-12-30
Date of Implementation: 2023-04-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 42278-2022: Rubber, vulcanized - Determination of stress in tension upon heating

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 83.060 CCSG40 National Standards of People's Republic of China Determination of thermal tensile stress of vulcanized rubber (ISO 12493.2017, IDT) Posted on 2022-12-30 2023-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Management Committee

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is equivalent to ISO 12493.2017 "Determination of thermal tensile stress of vulcanized rubber". Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Petroleum and Chemical Industry Federation. This document is sponsored by the General Test Method Subcommittee of National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35/SC2) Focus on. This document is drafted by. Double Star Group Co., Ltd., Beijing University of Chemical Technology, Guangzhou Synthetic Materials Research Institute Co., Ltd., High-speed Rail Inspection Instrument (Dongguan) Co., Ltd., Hangzhou Chaoyang Rubber Co., Ltd., Sailun Group Co., Ltd., Triangle Tire Co., Ltd., Guizhou Wheel Tire Co., Ltd., Shandong Jinyu Tire Co., Ltd., Shanghai Hanhai Testing Technology Co., Ltd., Jiangsu Xinzhenwei Testing Machinery Co., Ltd. Company, Jiangsu Mingzhu Testing Machinery Co., Ltd., Zhejiang Kedali Industrial Co., Ltd., Beijing Rubber Industry Research and Design Institute Co., Ltd. The main drafters of this document. Guo Fei, Wang Guilin, Chen Lifang, Zhang Jichuan, Yi Jun, Huang Taiyou, Wei Guozheng, Sheng Entian, Hu Shanjun, Ji Xuehua, Zhang Wei, Li Wei, Zhou Zhongwei, Feng Ping, Yin Zhi, Li Weiguo, Yang Zhuanqing, Qian Mingyan, Shen Junyan, Bao Dafei, Zhou Hongyi, Li Yaogang, Xie Junfang, Sun Siwen.

Introduction

Under constant stress, vulcanized rubber will shrink as the test temperature increases, while under constant strain, the sample will produce stress. Increase. These are the Gough-Joule effects of rubber, which should be considered in the design stage, otherwise the resulting forces and dimensional changes Both affect the performance of some products, such as rotary seals operating under high temperature and high strain conditions (see reference [1]). This document describes a test method for changes in tensile stress induced by an increase in test temperature. Determination of thermal tensile stress of vulcanized rubber Caution 1 --- Personnel using this document should have practical experience in formal laboratory work. This document does not indicate all possible safety In case of problems, the user is responsible for taking appropriate safety and health measures and ensuring compliance with the conditions stipulated in the relevant national laws and regulations. Warning 2 --- Some of the steps specified in this document may involve the use or generation of certain wastes, which may cause harm to the local environment. Appropriate safe handling and post-use disposal of waste should be specified in relevant documents.

1 Scope

This document describes a method for measuring the tensile stress (thermal stress) developed in vulcanized rubber when heated. Under different pre-strain and different temperature conditions, the change of thermal stress with time was measured.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. ISO 5893 Specification for rubber and plastics testing apparatus in tension, flexion and compression (constant movement) type [Rubberand cation] Note. GB/T 17200-2008 Technical specifications for rubber and plastic tensile, compressive and bending testing machines (constant speed drive) (ISO 5893.2002, IDT) Note. GB/T 25269-2010 Guidelines for Calibration of Rubber Test Equipment (ISO 18899.2004, IDT) Note. GB/T 2941-2006 Rubber Physical Test Methods Specimen Preparation and Adjustment General Procedures (ISO 23529.2004, IDT)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 thermal stress σT The force per unit initial area produced by a sample when it is heated. Note. The unit is Newton per square meter (N/m2) or Pascal (Pa). 3.2 Maximum thermal stress maximumthermalstress Peak thermal stress recorded during the test. 3.3 σT,t ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 42278-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 42278-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 42278-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 42278-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.