GB/T 42240-2022 English PDFUS$509.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 42240-2022: Nanotechnology - Measurement of metallic impurities in graphene powder - Inductively coupled plasma mass spectrometry Status: Valid
Basic dataStandard ID: GB/T 42240-2022 (GB/T42240-2022)Description (Translated English): Nanotechnology - Measurement of metallic impurities in graphene powder - Inductively coupled plasma mass spectrometry Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G30 Classification of International Standard: 71.040.50 Word Count Estimation: 26,284 Date of Issue: 2022-12-30 Date of Implementation: 2023-07-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 42240-2022: Nanotechnology - Measurement of metallic impurities in graphene powder - Inductively coupled plasma mass spectrometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 71.040.50 CCSG30 National Standards of People's Republic of China Determination of Metallic Impurities in Nanotechnology Graphene Powders Inductively Coupled Plasma Mass Spectrometry Posted on 2022-12-30 2023-07-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 2 5 Reagent or material 2 6 Instruments and equipment 3 7 sample 4 8 Test Step 5 9 Experiment data processing 6 10 Measurement uncertainty7 11 Test report 8 Appendix A (Informative) ICP-MS Test Reference Conditions 9 Appendix B (informative) Comparison of different sample processing methods 10 Appendix C (Informative) Standard Calibration Curves of Several Metal Impurities 13 Appendix D (Informative) Determination and Test Example of Metal Impurities in Graphene Powder Samples 15 Appendix E (Informative) Test Report Template 18 Reference 20forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents. This document was proposed by the Chinese Academy of Sciences. This document is under the jurisdiction of the National Nanotechnology Standardization Technical Committee (SAC/TC279). This document is drafted by. National Nanoscience Center, China Institute of Metrology, Guangzhou Special Pressure Equipment Testing and Research Institute, Shanghai Yi Yao Instrument Technology Development Co., Ltd., Beijing Institute of Science and Technology Analysis and Testing Institute (Beijing Physical and Chemical Analysis and Testing Center), Capital Division Fan University, South China University of Technology, Beijing Graphene Research Institute, Beijing Jitian Instrument Co., Ltd., Taizhou Graphene Research and Testing Platform Co., Ltd. company. The main drafters of this document. Liu Renxiao, Tian Guolan, Yin Zongjie, Li Maodong, Ren Lingling, Ge Guanglu, Guo Yuting, Ni Chenjie, Yu Xuelei, Liu Weili, Zhang Lan, Zhang Ronghua, Liu Xu, Chi Yawen, Ding Rong.IntroductionGraphene powder is currently the main form of graphene products in my country, and has been used in new energy batteries, thermal management, heavy-duty coatings and other industrial fields. Preliminary realization of large-scale application. Graphene powder can be produced through different production processes such as mechanical exfoliation, reduction oxidation, intercalation dissociation, small molecule synthesis, etc. preparation. Due to differences in production processes, production equipment, raw materials, etc., the ratio of metal impurity elements contained in graphene powders produced by different manufacturers There are also significant differences in species and content. Metal impurities will directly affect the application performance of graphene powder, graphene application technology development and production The development of the industry urgently needs to establish a standardized analytical test method for accurate and reliable detection of metal impurities in graphene powder. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) technology can realize the simultaneous rapid trace quantitative detection of various inorganic elements and isotopes It has wide dynamic linear range and high sensitivity. The development of a quantitative test method for metal impurities in graphene powder based on ICP-MS technology is under test The test is technically feasible, but three problems need to be solved. (1) Sample processing. the crystal structure of graphene is composed of carbon atoms covalently bonded by π-π The hexagonal close-packed honeycomb formed by the combination of graphene and chemical bonds is difficult to be opened, and the sample to be tested by ICP-MS technology should be a solution, so it is necessary to mix graphene The powder is completely digested. The "high temperature ashing" sample processing method is commonly used in the testing of carbon materials such as graphite, but due to the low apparent density of graphene, In the process of heating and ashing, it is easy to drift and inevitably introduce large errors; concentrated sulfur that has a strong digestion effect on graphene powder Acid, perchloric acid, hydrogen peroxide, etc. may produce obvious polyatomic ion interference during the test and affect the accuracy of the test results, or under high temperature and high pressure There is a high risk of explosion and explosion under airtight conditions, so it is first necessary to develop an applicable and scalable sample processing method. (2) Multi-element standard calibration Curve establishment and quantitative testing. the quantitative testing of inorganic impurities using ICP-MS technology requires the establishment of standard calibration curves for the measured elements, and There are more than 20 types of metal impurity elements contained in industrialized graphene powder, and the content of each element has a very wide distribution range, ranging from a few micrograms to Every kilogram (μg/kg) to thousands of milligrams per kilogram (mg/kg), so it is necessary to consider how to establish a standard calibration curve for each element to be measured; In addition, for elements that are susceptible to environmental influences, spectral line interference, and matrix interference, it is possible to establish appropriate methods or select appropriate test modes to Get the most accurate and reliable test results possible. (3) Recovery rate of standard addition. due to the complex composition of the graphene powder measurement sample and the influence factors of the test If there are many, the recovery rate of standard addition can be used to verify the reliability of the test analysis method. This document provides solutions to the above three problems and establishes Standardized quantitative test and analysis method for metal impurities in graphene powder. Determination of Metallic Impurities in Nanotechnology Graphene Powders Inductively Coupled Plasma Mass Spectrometry Warning. The reagents (nitric acid, hydrofluoric acid) used for sample digestion in this document are highly oxidizing and corrosive, and the operation process must be strictly Comply with the experimental conditions and instrument operating instructions, pay attention to safety protection.1 ScopeThis document describes a method for the determination of metallic impurities in graphene powders by inductively coupled plasma mass spectrometry. This document is applicable to the determination of metal impurities in graphene powder. Other carbon-based nanomaterials, such as carbon nanotubes, carbon fibers, porous carbon, etc. The determination of contained metal impurities shall be carried out according to the reference.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB 5009.268 National food safety standard Determination of multi-elements in food3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 graphene graphene graphene layer graphenelayer single-layer graphene single-layergraphene; monolayergraphene A monolayer of carbon atoms that combines one carbon atom with three surrounding carbon atoms to form a honeycomb structure. NOTE 1.It is an important building block of many carbon nanoobjects. Note 2.Since graphene has only one layer, it is often called monolayer graphene. Graphene is abbreviated as 1LG to distinguish it from bilayer graphite abbreviated as 2LG ene and few-layer graphene abbreviated as FLG. NOTE 3.Graphene has boundaries and has defects and grain boundaries where carbon-carbon bonds have been disrupted. [Source. GB/T 30544.13-2018, 3.1.2.1] 3.2 Graphene powder graphene powder It is a black or brownish-yellow powder mainly composed of graphene and related two-dimensional materials. Note. Graphene powder includes single-layer graphene (1LG), double-layer graphene (2LG), few-layer graphene (FLG), graphene nanosheet (GNP), mechanical exfoliation stone Graphene, chemically dissociated graphene, small molecule synthesis (CVD, PVD) graphene, reduced graphene oxide (rGO), graphene oxide (GO), etc. 3.3 Few-layer graphene few-layer graphene; FLG Two-dimensional materials that consist of stacks of three to ten complete graphene layers. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42240-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 42240-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 42240-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42240-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
