GB/T 41880-2022 PDF EnglishUS$110.00 · In stock · Download in 9 seconds
GB/T 41880-2022: Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 41880-2022: Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT41880-2022 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 83.080.10 CCS G 32 GB/T 41880-2022 / ISO 21318:2007 Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts (ISO 21318:2007, IDT) ISSUED ON: OCTOBER 12, 2022 IMPLEMENTED ON: OCTOBER 12, 2022 Issued by: State Administration for Market Regulation; Standardization Administration of the PRC. Table of ContentsForeword ... 3 Introduction ... 4 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 5 4 Reagents ... 5 5 Apparatus ... 5 6 Test procedure ... 6 7 Expression of results ... 6 8 Precision ... 7 9 Test report ... 7 Bibliography ... 8ForewordThis document is drafted in accordance with GB/T 1.1-2020 "Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents". This document is identical to ISO 21318:2007 "Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts". This document adds two Clauses "Normative references" and "Terms and definitions". Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority of this document shall not be held responsible for identifying any or all such patent rights. This document was proposed by China Petroleum and Chemical Industry Federation. This document shall be under the jurisdiction of National Technical Committee 15 on Plastic of Standardization Administration of China (SAC/TC 15). Drafting organizations of this document: Shandong Shengquan New Materials Co., Ltd., Dalian Qihua New Material Co., Ltd., Guangzhou Huaxin Testing Technology Co., Ltd., Shanghai Qianshi Technology Co., Ltd., Nantong Xingchen Synthetic Materials Co., Ltd., Jiangsu Yangnong Kumho Chemical Co., Ltd., Dongguan National New Materials Institute Co., Ltd., Jilin Province Product Quality Supervision and Inspection Institute. Main drafters of this document: Liu Mingxiang, Guo Shuzhi, Wang Jing, Zhang Xiumei, Lu Ning, Gao Hui, Li Fu, Huang Yong, Xu Xiaohu, Chen Yuwen, Wang Dabing, Wang Meiling, Li Shangyu, Guo Yingying. Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts Warning: Personnel using this document should be familiar with normal laboratory operations. This document does not purport to address all safety issues during use. Users shall develop safety and health measures and ensure compliance with regulatory requirements.1 ScopeThis document describes a method for determining the electrical conductivity of the aqueous extract obtained by extracting epoxy resins with water at 95 °C. This document is only applicable to epoxy resins that are in a molten state at extraction temperature (95 °C). This method is of great significance to epoxy resin used as insulating material for electronic equipment. The electrical conductivity of the extract is used to evaluate the concentration of ionic substances in the resin.2 Normative referencesThere are no normative references in this document.3 Terms and definitionsThere are no terms and definitions to be defined in this document.4 ReagentsWater: Use distilled water and/or deionized water with an electrical conductivity lower than 2.0 μS/cm.5 Apparatus5.1 Electrical conductivity meter: Accurate to 0.1 μS/cm. It can be immersed in the aqueous extract and has temperature compensation function. 5.2 Glass measuring cylinder: 100 mL. 5.3 Analytical balance: Accurate to 0.01 g. 5.4 Electrothermal blowing drying oven: It is capable of maintaining a temperature of 95 °C±3 °C. 5.5 High-density polyethylene bottle: 100 mL (with a screw cap). 5.6 Polyethylene cup: 100 mL.6 Test procedure6.1 Weigh 8.00 g±0.05 g of test portion into a 100 mL high-density polyethylene bottle (5.5). 6.2 Add 80 mL±2 mL of water into the bottle and cover it. 6.3 Put the bottle into the electrothermal blowing drying oven (5.4) which has been stabilized at 95 °C. 6.4 After 30 min, slowly open the bottle cap to release the internal pressure, to prevent the bottle from bursting. Then retighten the cap. Warning: When performing test procedure 6.4, wear protective gloves and mask. 6.5 After 20 h±0.5 h, take the bottle out of the electrothermal blowing drying oven; cool it to room temperature. 6.6 Pour water into a polyethylene cup (5.6); use an electrical conductivity meter (5.1) to measure the electrical conductivity at 25 °C. 6.7 Without adding test portion, according to the same steps, use the same water to carry out the blank test.7 Expression of resultsCalculate the electrical conductivity γ of the aqueous extract according to formula (1), expressed in microsiemens per centimeter (μS/cm): Where: γS - Indicated value of electrical conductivity of aqueous extract of test portion, in microsiemens per centimeter (μS/cm); γB - Indicated value of electrical conductivity of blank test, in microsiemens per ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 41880-2022 be delivered?Answer: The full copy PDF of English version of GB/T 41880-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 41880-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41880-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 41880-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 41880-2022?A step-by-step guide to download PDF of GB/T 41880-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 41880-2022". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
