GB/T 41865-2022 English PDF

US$584.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41865-2022: Software and systems engineering - Reference model for product line engineering and management
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 41865-2022	584	Add to Cart	4 days	Software and systems engineering - Reference model for product line engineering and management	Valid

Similar standards

GB/T 42450   GB/T 39788   GB/T 40685   GB/T 41866.2   GB/T 41866.1   

Basic data

Standard ID: GB/T 41865-2022 (GB/T41865-2022)
Description (Translated English): Software and systems engineering - Reference model for product line engineering and management
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L77
Classification of International Standard: 35.080
Word Count Estimation: 34,345
Date of Issue: 2022-10-14
Date of Implementation: 2023-05-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 41865-2022: Software and systems engineering - Reference model for product line engineering and management

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Software and systems engineering -- Reference model for product line engineering and management ICS 35.080 CCSL77 National Standards of People's Republic of China Software and Systems Engineering Product Line Engineering and Management Reference Model (ISO /IEC 26550.2015, IDT) Published on 2022-10-12 2023-05-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 From single system engineering and management to product line engineering and management5 5 Product Line Engineering and Management Reference Model 8 6 Dual Life Cycle and Dual Process Groups for Product Line Engineering and Management 9 7 Domain Engineering and Application Engineering Internal and Interrelationships 19 Appendix A (Informative) Further information on the product 26 Reference 27

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is equivalent to ISO /IEC 26550.2015 "Software and Systems Engineering Product Line Engineering and Management Reference Model". The following minimal editorial changes have been made to this document. ---According to the latest version of international standards and the selection of national standards, this document within the scope of the full text refers to the standard cited in the original text. The standard number has been partially revised, and the corresponding national standard number has been added. The original reference to ISO /IEC 12207.2008 has been updated as ISO /IEC /IEEE12207.2017, the national standard has been identically adopted as GB/T 8566-2022, the original quoted international standard ISO /IEC /IEEE15288.2015 national standard has been adopted as GB/T 22032-2021, originally quoted as international standard ISO /IEC 15940.2006 has been updated to ISO /IEC 15940.2013, and the national standard is equivalent to GB/T 30972- 2014, these modifications do not affect the technical content of this document; ---Chapter 3 Terms and Definitions The original text is missing 3.22, this document changes the item numbers of the original 3.23~3.29 to 3.22~3.28. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28). This document is drafted by. China Electronics Standardization Institute, Beihang University, Jiangsu Saixi Technology Development Co., Ltd., Shenzhen Shenzhen Saixi Information Technology Co., Ltd., China Shipbuilding Industry Corporation No. 709 Research Institute, Software Research Institute of Chinese Academy of Sciences, National Application Software Product Quality Supervision and Inspection Center, Chongqing Software Evaluation Center Co., Ltd., Shanghai Software Evaluation Center Co., Ltd., Chengdu Information Engineering University, Beijing Institute of Radio Measurement, No. 706 Institute of the Second Research Institute of China Aerospace Science and Industry Corporation, Chengdu Songxing Technology Co., Ltd. Company, Shandong Shanke Digital Economy Research Institute Co., Ltd., Inspur General Software Co., Ltd., Beijing University of Technology, Suzhou Saiteng Precision Electronics Co., Ltd. Co., Ltd., Shandong Provincial Computing Center (National Supercomputing Jinan Center). The main drafters of this document. Yu Xiuming, Zhang Yangyang, Huang Jihong, Wang Wei, Zhang Wenyuan, Yang Li, Shu Hongping, Lai Xiangwei, Park Hope, Sun Jinyang, Liu Yan, Lou Li, Li Wang, Zhang Li, Wang Guanqun, Li Gang, Liu Xiaojian, Cui Xiaofeng, Zhang Xingxing, Lu Xue, Liu Wenhong, Jiang Jianmin, Wang Tiejun, Wang Yaqiang, Li Min, Hao Lin, Hou Min, Sun Hailong, Liu Yanwei, Wang Tengjiang, Sun Haiwang.

Introduction

to global attention. SSPL Engineering and Management creates, leverages and manages a common platform for lower cost, faster time to market and more Good quality develops a range of products (eg software products, system architectures). This document provides a reference model that includes an abstraction of key processes and relationships between processes in software and systems product line engineering and management. Elephant representation. The difference between product line engineering and single system engineering is that it has two key characteristics, namely requirements area engineering and application engineering. Lifecycle processes, and the need for a clear definition of variability. The goal of domain engineering is to define and implement the common use of member products in a product line For domain assets, the goal of application engineering is to develop applications that utilize domain assets including generic and variable assets. Domain Engineering Clear Define product line variability that reflects the specific needs of different markets and market segments. Mutability can be embedded into domain assets. In application engineering, Domain assets are configured according to a defined variability model. SSPL engineering and management reference model can be used for subsequent standardization work, created for software and systems product line engineering. high abstraction standards (such as product management, scoping, requirements engineering, design, implementation, verification and validation, organizational and technical management), moderately abstract standards (such as configuration management, variability modeling, risk management, quality assurance, measurement, evaluation, and asset storage), and detailed abstract standards (such as construction, configuration mechanism and asset mining). Software and Systems Engineering Product Line Engineering and Management Reference Model

1 Scope

This document is the basis for a family of standards for engineering and management of software and systems product lines. The scope of this document includes. ---Provide specific terms and definitions for software and systems product line engineering and management; --- Define a reference model for the overall structure and process of software and systems product line engineering and management, and describe the product line reference model how the components are combined; --- Define the relationship between the product line reference model components. This document does not describe any methods and tools related to the engineering and management of software and systems product lines. These methods and tools are in the product line It is described in the Engineering and Management series of standards (ISO /IEC 26551~ISO /IEC 26556). This document does not address ISO /IEC /IEEE 24765.2010, which provides a common vocabulary for all systems and software engineering work. In this document, "product" refers to a software system, or a "system-level product" composed of hardware and software systems. This document only deals with hardware systems The product line engineering and management of the product line may be useful, but it is not specific to the hardware product line. Although hardware usually forms a product together with software product, but this document is not intended to assist in the engineering, production, storage, logistics and management of the hardware that constitutes the product, such processes being other Disciplines (eg mechanics, electronics). Note. Appendix A provides additional information about the product. This document includes product line reference models, terms and definitions, and is defined in GB/T 8566-2022/ISO /IEC /IEEE12207.2017, GB/T 22032-2021/ISO /IEC /IEEE15288.2015, GB/T 30972-2014/ISO /IEC 15940.2013, ISO / The structure of IEC 14102.2008 serves as a baseline.

2 Normative references

There are no normative references in this document.

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Architectural structures and rules (such as general rules and constraints) that govern the products of specific members within a product line. NOTE. The application architecture describes the high-level design of a specific member product within the product line. Application architecture reuse (possibly modified) area for member products in the product line Common parts of the schema, and bind the variable parts of the domain schema. In most cases, the application architecture of member products requires the development of application-specific transsexual. 3.2 application asset applicationasset The output of a specific application engineering process such as application implementation. Such assets can be used in other life cycle processes of application engineering and can be Adjusted to domain assets based on product management decisions. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41865-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41865-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41865-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41865-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.