GB/T 41478-2022 English PDF

US$329.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41478-2022: Quality control of production process - System model and architecture - Assembly and casting
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 41478-2022	329	Add to Cart	4 days	Quality control of production process - System model and architecture - Assembly and casting	Valid

Similar standards

GB/T 4213   GB/T 41251   GB/T 32828   GB/T 45507   GB/T 44406   

Basic data

Standard ID: GB/T 41478-2022 (GB/T41478-2022)
Description (Translated English): Quality control of production process - System model and architecture - Assembly and casting
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N19
Word Count Estimation: 16,196
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 41478-2022: Quality control of production process - System model and architecture - Assembly and casting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Quality control of production process -- System model and architecture -- Assembly and casting ICS 25.040.40 CCSN19 National Standards of People's Republic of China Production Process Quality Control System Model and Architecture Assembly and Casting 2022-11-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Abbreviations 2 5 System Model and Architecture 3 5.1 System Structure Composition 3 5.2 System functions and requirements 4 5.3 System Model Technical Requirements 5 5.4 Quality Analysis and Evaluation 7 5.5 Quality Traceability and Improvement 7 6 Assembly Quality Control 7 6.1 General requirements7 6.2 Technical requirements for prior control8 6.3 Technical requirements for in-process control 9 6.4 Technical requirements for post-event control 9 7 Casting Quality Control 10 7.1 General requirements 10 7.2 Technical requirements for prior control 11 7.3 Technical requirements for in-process control 12 7.4 Technical requirements for post-event control 12 Reference 14

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee on Standardization of Industrial Process Measurement Control and Automation (SAC/TC124). This document is drafted by. Wuxi Vocational and Technical College, Wuzhong Instrument Co., Ltd., Institute of Comprehensive Technology and Economics of Machinery Industry Instrumentation Research Institute, Dongfeng Design and Research Institute Co., Ltd., Zhejiang Zhongkong Technology Co., Ltd., Wuhan Marine Machinery Co., Ltd., China National Petroleum Corporation Science (Beijing), Shenyang Institute of Automation, Chinese Academy of Sciences, Shandong Computing Center (National Supercomputing Jinan Center), Nanchang University, China Tobacco Grass Head Office Staff Training College, CITIC Dicastal Co., Ltd., Mianyang Weibo Electronics Co., Ltd., Chongqing Chuanyi Automation Co., Ltd. Co., Ltd., Wuxi Bell Machinery Co., Ltd. The main drafters of this document. Chen Yuping, Ma Yushan, Wang Chengcheng, You Heping, Yu Wenguang, Li Feng, Zhang Fengli, Wang Kai, Song Jiana, Ma Junfeng, Guo Wei, Peng Zhenghong, Huang Liang, Tang Xia, Wang Chunxi, Zhang Zhen, Liu Jiansheng, Wang Deji, Liu Yang, Tian Yingming, Jia Hua, Zhang Haichao. Production Process Quality Control System Model and Architecture Assembly and Casting

1 Scope

This document specifies the system model and architecture of the production process quality control of the assembly and casting digital workshop, the quality control of the assembly process, the casting process Manufacturing process quality control, etc. This document is applicable to the quality control of the production process of the assembly and casting digital workshop, and can be used to improve the quality control of the assembly and casting production process control capacity.

2 Normative references

There are no normative references in this document.

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 production process The whole process of turning raw materials into finished products. [Source. GB/T 4863-2008, 3.1.9] 3.2 manufacturing A function or activity that transforms a material from a raw or semi-finished state to a further completed state. [Source. GB/T 19114.44-2012, 3.1.7] 3.3 system An assemblage of one or more processes, hardware, software, facilities, and personnel that has the ability to meet a defined requirement or objective ability. [Source. GB/T 26224-2010, 3.26] 3.4 model An abstract description of an aspect of real-world affairs in any way (including mathematical, physical, symbolic, graphical, or descriptive). [Source. GB/T 25485-2010, 3.32] 3.5 assembly The process of mating and connecting parts or components to make them semi-finished or finished. [Source. GB/T 51218-2017, 12.1.1] 3.6 virtual assembly The process of assembly analysis and simulation of the assembly model formed by assembly modeling. Including one or more assembly sequence planning, assembly ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41478-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41478-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41478-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41478-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.