GB/T 41345-2022 English PDF

US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41345-2022: General technical requirements for compression mould for plastic closure
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 41345-2022	219	Add to Cart	3 days	General technical requirements for compression mould for plastic closure	Valid

Similar standards

GB/T 43657.2   GB/T 42157.1   GB/T 39830   GB/T 38055.1   GB/T 35205.1   

Basic data

Standard ID: GB/T 41345-2022 (GB/T41345-2022)
Description (Translated English): General technical requirements for compression mould for plastic closure
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J83
Word Count Estimation: 11,118
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 41345-2022: General technical requirements for compression mould for plastic closure

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General technical requirements for compression mould for plastic closure ICS 55.200 CCSJ83 National Standards of People's Republic of China General technical requirements for compression molding molds for plastic bottle caps Published on 2022-03-09 2022-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Packaging Machinery Standardization Technical Committee (SAC/TC436). This document is drafted by. Guangdong Xinglian Precision Machinery Co., Ltd., Sacmi (Shanghai) Machinery Equipment Co., Ltd., Guangzhou Tech-Long Packaging Machinery Co., Ltd., Jiangsu Newamstar Packaging Machinery Co., Ltd., Hefei General Machinery Research Institute Co., Ltd., Guangzhou Jingpin Intelligent Compression Technology Co., Ltd., Hangzhou Wahaha Precision Machinery Co., Ltd., Shanghai Ziri Packaging Co., Ltd., Hongquan Enterprise (Suzhou) Co., Ltd. Company, Jinfu Technology Co., Ltd., Harbin University of Commerce, Zhejiang University Ningbo Institute of Technology, Hefei General Mechanical and Electrical Products Testing Institute Co., Ltd. Company, South China University of Technology, Coca-Cola Beverage (Shanghai) Co., Ltd., COFCO Coca-Cola Beverage (China) Investment Co., Ltd., Danone (China) Food and Beverage Co., Ltd. Guangzhou Branch, Bright Dairy Co., Ltd., Xiamen Green Spring Industrial Co., Ltd., Inner Mongolia Yili Industrial Group Co., Ltd., Blue Moon (China) Co., Ltd., China Resources C'estbon Beverage (China) Co., Ltd., China Resources Sanjiu Pharmaceutical Co., Ltd. The main drafters of this document. Jiang Xiaoping, Lu Jia, Han Lu, Li Jingming, He Yuntao, Chen Runjie, Dong Shusheng, Lin Changwu, Lu Shuguang, Cao Xiaohong, Dong Hailong, Ji Rong, Tu Xiaoting, Zhou Xinxiang, Wang Lan, Wu Yangyou, Ding Yun, Yin Xiongfei, Huang Yangan, Zou Zhongquan, Zhao Zhiguo, Huang Zhenbin, Huang Jinhong, Sun Zhihui, Wu Xiaowen, Ye Hui, Tao Yong, Jin Guoxing, Cai Yongji, Zhou Jianwei, Hu Qingchun, Gao Haining, Lu Yunfeng, Jian Qiugui, Wang Pengtao, Zhou Bo, Yang Peng, Li Chuwen, Yin Gang, Guo Liang, Jiang Junyi, Tang Weiqiang, Zeng Jianzhong, Zhong Hualin, Su Jiqian. General technical requirements for compression molding molds for plastic bottle caps

1 Scope

This document specifies the model, type, main structure, basic parameters, working conditions, technical requirements, inspection of plastic bottle cap compression molding molds and test methods, inspection rules, marking, packaging, transportation and storage requirements. This document applies to the design, manufacture, inspection and application of plastic bottle cap compression molding molds (hereinafter referred to as "molds").

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 191 Graphical signs of packaging, storage and transportation GB/T 7311 Packaging Machinery Classification and Model Compilation Method GB/T 9969 General Principles of Instruction Manual for Industrial Products GB/T 13277.1 Compressed Air Part 1.Pollutant Purification Level GB/T 13384 General technical conditions for packaging of mechanical and electrical products GB 16798 Food Machinery Safety and Hygiene GB/T 17876 Plastic anti-theft caps for packaging containers GB/T 19891 Hygienic requirements for mechanical safety mechanical design GB/T 19923 Urban Wastewater Recycling Industrial Water Quality

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 compression moulding mould The plastic in the plasticized state of quantitative cutting is directly put into the molding area, and the mold is formed by applying pressure. 3.2 Mould parts for forming the inner surface of bottle caps. 3.3 threaded core Parts formed by the internal thread of the bottle cap. 3.4 inner core The utility model is installed on the threaded core, moves relatively with the threaded core during operation, and forms the parts of the internal structure of the bottle cap together with the threaded core. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 41345-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 41345-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 41345-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41345-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.