GB/T 40923.1-2021 English PDFUS$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 40923.1-2021: Snowboards - Binding mounting area - Part 1: Requirements and test methods for snowboards without inserts Status: Valid
Basic dataStandard ID: GB/T 40923.1-2021 (GB/T40923.1-2021)Description (Translated English): Snowboards - Binding mounting area - Part 1: Requirements and test methods for snowboards without inserts Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y55 Word Count Estimation: 9,915 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 40923.1-2021: Snowboards - Binding mounting area - Part 1: Requirements and test methods for snowboards without inserts---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Snowboards - Binding mounting area - Part 1.Requirements and test methods for snowboards without inserts ICS 97.220.20 CCSY55 National Standards of People's Republic of China Snowboard holder installation area part 1. Requirements and test methods for non-insert ski snowboards (ISO 10958-1.1998, MOD) Released on 2021-11-26 2021-11-26 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 1 of GB/T 40923 "Ski Snowboard Fixer Installation Area". GB/T 40923 has released the following parts. ---Part 1.Requirements and test methods for non-insert ski snowboards; ---Part 2.Requirements and test methods for snowboards with inserts. This document uses the redrafting method to modify and adopt ISO 10958-1.1998 "Skiing Snowboard Fixer Installation Area Part 1.Without Insert Requirements and test methods for skiing snowboards. The technical differences between this part and ISO 10958-1.1998 and the reasons are as follows. ---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to the latest editions of international standards. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● ISO 10045.2017 is used instead of ISO 10045.1991. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed and managed by the China National Light Industry Council. Drafting organizations of this document. Suzhou Huace Testing Technology Co., Ltd., Hebei Product Quality Supervision and Inspection Institute (National Sports Goods Supervision and Inspection Center), China Culture, Education and Sporting Goods Association, Zhejiang Light Industry Quality Inspection and Research Institute, Beijing Aokangda Sports Industry Co., Ltd. Limited company, Qingdao Impulse Health Technology Co., Ltd. The main drafters of this document. Wang Feng, Dong Zhanwei, Hu Hongjiang, Zhu Huaiqiu, Wei Chengsheng, Zhou Maoan, Liu Wenqiu.IntroductionThe installation area of the ski veneer holder is an important functional unit to ensure the quality of the ski veneer product and the safety of skiers. One of the key components in the fixed installation area of the snowboard. It clearly puts forward the strength and technical requirements for the installation area of the snowboard holder without inserts. The important significance plays an important role in guiding the production, design, research and application of ski snowboards, fixtures and retaining devices. GB/T 40923 "Ski Snowboard Fixer Installation Area" aims to establish the technology of the ski snowboard fixture installation area, fixtures and fixtures The requirements and test methods are divided into the following two parts according to the presence or absence of inserts. ---Part 1.Requirements and test methods for non-insert ski snowboards. The purpose is to stipulate the installation of anchors for ski snowboards without inserts Requirements and test methods for zones, fixtures and fixtures. ---Part 2.Requirements and test methods for snowboards with inserts. The purpose is to stipulate the technical Technical requirements and test methods. Snowboard holder installation area part 1. Requirements and test methods for non-insert ski snowboards1 ScopeThis document specifies the requirements and test methods for the fixture installation area, fixtures and fixtures for adult and adolescents without inserts. The method includes the dimensions, test methods and other technical requirements involved in the fixed installation area when producing ski snowboards, fixtures and fixtures. This document applies to snowboards with a nominal length of lN≥1000mm.2 Normative referencesThe content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. ISO 6004.1991 Requirements for bolts for alpine skis and snowboard fasteners (Alpineskis-Skibindingscrews-Re- quirements) ISO 10045.2017 Requirements for test bolts in the mounting area of alpine skis (Alpineskis-Bindingmounting area-Requirementsfortestscrews)3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Insert Reusable threaded attachment points that are permanently fixed to the snowboard during manufacture. Note. It is used to install the retainer on the snowboard, and the installation mode is often determined by the manufacturing mode of the specific retainer. 3.2 Leash One end is connected to a board or a fixture, and the other end is connected to a rope-like device on the skier's leg.4 Technical requirements for the fixture installation area4.1 Identification of the installation point The ski snowboard manufacturer shall mark the installation point with a clearly visible and indelible mark on the surface of the ski snowboard. ---The center of the front part of the snowboard fixed area; ---The center of the back of the snowboard fixed area. If there is a deviation from the technical requirements specified in 4.2 and 4.3, it should be clearly marked on the surface of the snowboard. 4.2 Length of the holder installation area The length of the fixture installation area forward and backward from each installation point should be at least 110mm (see Figure 1). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 40923.1-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 40923.1-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 40923.1-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 40923.1-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
