GB/T 39515.3-2020 English PDFUS$264.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 39515.3-2020: Agricultural and forestry machinery-Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops Status: Valid
Basic dataStandard ID: GB/T 39515.3-2020 (GB/T39515.3-2020)Description (Translated English): Agricultural and forestry machinery-Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B91 Classification of International Standard: 65.060.40 Word Count Estimation: 14,133 Date of Issue: 2020-12-14 Date of Implementation: 2021-07-01 Quoted Standard: GB/T 39515.1-2020; ISO 4102; ISO 4254-6-2009; ISO 4288; ISO 5681; ISO 5682-1; ISO 5682-2-1997; ISO 5682-3-1996; ISO 9357; ISO 9898-2000; ISO 13440-1996; ISO 21278-1; ISO 21278-2; ISO 22368-1; ISO 22368-3 Adopted Standard: ISO 16119-3-2013, IDT Regulation (derived from): National Standard Announcement No. 28 of 2020 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration Summary: This standard specifies technical requirements and verification methods for minimizing the potential risk of environmental pollution during the use of sprayers for shrubs and trees (see 3.1 definition) and other similar crop sprayers (including misuse that can be foreseen by the manufacturer). This standard does not apply to manual sprayers for shrubs and trees. This standard is used in conjunction with GB/T 39515.1, which specifies general requirements for the design and performance of various sprayers. If the requirements specified in this standard are not the same as those specified in GB/T 39515.1, sprayers that fall within the scope of application of this standard have priority to follow the requirements of this standard. This standard does not contain safety aspects. For safety requirements, see ISO 4254-6. This standard does not apply before its issuance date GB/T 39515.3-2020: Agricultural and forestry machinery-Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Agricultural and forestry machinery:Environmental requirements for sprayers:Part 3: Sprayers for shrubs and trees) ICS 65:060:40 B91 National Standards of People's Republic of China Environmental requirements for agricultural and forestry machinery sprayers Part 3: Sprayer for shrub and tree crops (ISO 16119-3:2013, IDT) 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee ForewordGB/T 39515 "Environmental Requirements for Agricultural and Forestry Machinery Sprayers" is divided into 4 parts: ---Part 1: General requirements; ---Part 2: Horizontal boom sprayer; ---Part 3: Sprayers for shrubs and trees crops; ---Part 4: Stationary and semi-mobile sprayers: This part is Part 3 of GB/T 39515: This section was drafted in accordance with the rules given in GB/T 1:1-2009: The translation method used in this part is equivalent to ISO 16119-3:2013 Environmental Requirements for Agricultural and Forestry Machinery Sprayers Part 3: Shrubs and Sprayer for arbor crops: The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows: ---GB 10395:6-2006 Agricultural and forestry tractors and machinery safety technical requirements Part 6: Plant protection machinery (ISO 4254-6:1995, MOD) ---GB/T 10610-2009 Product Geometric Technical Specification (GPS) Surface structure profile method to evaluate the rules of surface structure And method (ISO 4288:1996, IDT) ---GB/T 18675-2002 Determination of total residual liquid volume of agricultural sprayers for plant protection machinery (idtISO 13440:1996) ---GB/T 18678-2002 Plant protection machinery, agricultural sprayer (apparatus), the rated capacity of the liquid tank and the diameter of the filling hole (eqv ISO 9357:1990) ---GB/T 20084-2006 Plant protection mechanical sprayer connection thread (ISO 4102:1984, MOD) ---GB/T 20085-2006 Plant protection machinery vocabulary (ISO 5681:1992, MOD) ---GB/T 20183:1-2006 Plant protection machinery spray equipment Part 1: Sprayer nozzle test method (ISO 5682-1:1996, IDT) ---GB/T 20183:2-2006 Plant protection machinery spraying equipment Part 2: Hydraulic sprayer test method (ISO 5682-2:1997, IDT) ---GB/T 20183:3-2006 Plant protection machinery spray equipment Part 3: Agricultural hydraulic sprayer liquid application per hectare Regulation system test method (ISO 5682-3:1996, IDT) ---GB/T 24683-2009 Plant protection machinery, test method of air blower for bush and tree crops (ISO 9898:2000, IDT) ---GB/T 24684:1-2009 Plant protection machinery evaluation cleaning system test method part 1: sprayer machine Internal cleaning (ISO 22368-1:2004, IDT) ---GB/T 24684:3-2009 Plant protection machinery evaluation cleaning system test method Part 3: The inside of the chemical tank Cleaning (ISO 22368-3:2004, IDT) ---GB/T 32242:1-2015 Plant protection mechanical inhalation dosing device Part 1: Test method (ISO 21278-1: 2008, MOD) ---GB/T 32242:2-2015 Plant protection mechanical inhalation dosing device Part 2: General requirements and performance limits (ISO 21278-2:2008,MOD) This section has made the following editorial changes: --- Use "MPa" conversion instead of "bar": This part was proposed by China Machinery Industry Federation: This part is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201): Drafting organizations of this section: Taizhou Xinyi Agricultural Machinery Co:, Ltd:, Chinese Academy of Agricultural Mechanization Sciences, Shandong Huasheng Agricultural Pharmaceutical Machinery Co:, Ltd: Limited Liability Company, Zhejiang Osen Machinery Co:, Ltd:, Nanjing Agricultural Mechanization Research Institute of Ministry of Agriculture and Rural Affairs, Fujite Co:, Ltd: The main drafters of this section: Chen Jian, Yan Herong, Cui Jingguo, Liu Xiande, Zhou Haiyan, Xue Xinyu, Tang Genfa, Chen Jiankang, Zhang Tie, Dong Xiang, Guo Fengjiang and Jin Chen:IntroductionThe technical requirements of this part of GB/T 39515 are based on the test methods given in ISO 5682-2:1997: This standard is mainly used for liquids: Power sprayer: For other types of sprayers, other test methods and/or test standards that may be required are part of GB/T 39515 Subject to future investigation/revision: This part belongs to the Type C standard specified by ISO 12100: This section points out the machinery-related hazards, dangerous states, dangerous events and their scope covered: When the provisions of Type C standards are different from those of Type A or Type B standards as the basis, the provisions of Type C standards take precedence over those of other standards: It is stipulated that the design and manufacture of machinery and tools shall follow the provisions of the Class C standard: Environmental requirements for agricultural and forestry machinery sprayers Part 3: Sprayer for shrub and tree crops1 ScopeThis part of GB/T 39515 specifies the use of sprayers for shrub and tree crops (see the definition in 3:1) and other similar crops: Technical requirements and verification methods for minimizing the potential risk of environmental pollution during use (including misuse that can be foreseen by the manufacturer): This section does not apply to shrub and tree crops with human-powered sprayers: This part is used in conjunction with GB/T 39515:1 which specifies general requirements for the design and performance of various sprayers: As specified in this section The requirements are different from those specified in GB/T 39515:1, and sprayers that fall within the scope of this section have priority to follow the provisions of this section: this The part does not contain safety aspects: For safety requirements, see ISO 4254-6: This section does not apply to sprayers manufactured before the release date:2 Normative referencesThe following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: GB/T 39515:1-2020 Environmental requirements for agricultural and forestry machinery sprayers Part 1: General requirements (ISO 16119-1:2013, IDT) ISO 4102 Plant protection mechanical sprayer connection thread (Equipmentforcropprotection-Sprayers-Con- nectionthreading) ISO 4254-6:2009 Safety of Agricultural Machinery Part 6: Sprayers and Liquid Fertilizers (Agriculturalmachinery- Safety-Part 6: Sprayersandliquidfertilizerdistributors) ISO 4288 Product Geometric Technical Specification (GPS) Surface structure profile method: Rules and methods for evaluating surface structure (Geo- metricalProductSpecifications(GPS)-Surfacetexture:Profilemethod-Rulesandproceduresfor theassessmentofsurfacetexture) ISO 5681 Plant Protection Machinery Vocabulary (Equipmentforcropprotection-Vocabulary) ISO 5682-1 Plant protection machinery spray equipment Part 1: Sprayer nozzle test method (Equipmentforcrop protection-Sprayingequipment-Part 1:Testmethodsforsprayernozzles) ISO 5682-2:1997 Plant protection machinery spraying equipment Part 2: Hydraulic sprayer test method (Equipmentfor cropprotection-Sprayingequipment-Part 2:Testmethodsforhydraulicsprayers) ISO 5682-3:1996 Plant protection machinery spray equipment-Part 3: Agricultural hydraulic sprayer per hectare adjustment system Test method (Equipmentforcropprotection-Sprayingequipment-Part 3:Testmethodforvolume/hec- tareadjustmentsystemsofagriculturalhydraulicpressuresprayers) ISO 9357 Plant protection machinery, agricultural sprayer (apparatus), the rated capacity of the chemical tank and the diameter of the filling hole (Equipmentforcrop protection-Agriculturalsprayers-Tanknominalvolumeandfilingholediameter) ISO 9898:2000 Plant protection machinery: Test method for air blower sprayer for shrub and tree crops (Equipmentfor cropprotection-Testmethodsforair-assistedsprayersforbushandtreecrops) ISO 13440:1996 Plant protection machinery agricultural sprayer total residual liquid determination (Equipmentforcropprotec- tion-Agriculturalsprayers-Determinationofthevolumeoftotalresidual) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39515.3-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39515.3-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 39515.3-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39515.3-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
