GB/T 39383-2020 English PDF

US$184.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39383-2020: Thermoplastics piping systems for underground non-pressure applications. Test method for leak tightness of elastomeric sealing ring type joints
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 39383-2020	184	Add to Cart	3 days	Thermoplastics piping systems for underground non-pressure applications. Test method for leak tightness of elastomeric sealing ring type joints	Valid

Similar standards

GB/T 39379   GB/T 39514   GB/T 39382   GB/T 39380.2   GB/T 39380.1   

Basic data

Standard ID: GB/T 39383-2020 (GB/T39383-2020)
Description (Translated English): Thermoplastics piping systems for underground non-pressure applications. Test method for leak tightness of elastomeric sealing ring type joints
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G33
Classification of International Standard: 83.140.30
Word Count Estimation: 10,196
Date of Issue: 2020-11-19
Date of Implementation: 2021-06-01
Adopted Standard: ISO 13259-2018, IDT
Regulation (derived from): National Standard Announcement No. 26 of 2020
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration
Summary: This standard specifies the test method for the sealing performance of elastic sealing ring joints of buried non-pressure thermoplastic piping systems. Unless otherwise specified in the relevant standards, the test is carried out under the following three pressures: p1: internal negative air pressure (partial vacuum); p2: lower internal hydrostatic pressure; p3: higher internal hydrostatic pressure. This standard also specifies the following 4 test conditions: a) condition A: no radial deformation and axial deflection; b) condition B: radial deformation; c) condition C: axial deflection; d) condition D: There are axial deflection and radial deformation. The test pressure and test conditions shall be implemented in accordance with relevant standards.

GB/T 39383-2020: Thermoplastics piping systems for underground non-pressure applications. Test method for leak tightness of elastomeric sealing ring type joints

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints ICS 83.140.30 G33 National Standards of People's Republic of China Pressureless thermoplastic piping system for underground use Test method for sealing performance of elastic sealing ring joints 2020-11-19 released 2021-06-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. The translation method used in this standard is equivalent to ISO 13259.2018 ``Elastic sealing ring joints for buried non-pressure thermoplastic plastic piping systems Test Method for Sealing Performance of China. This standard has made the following editorial changes. ---Removed the query URL quoted in terms and definitions; ---The pressure dimension bar (bar) is changed to the legal unit of measurement MPa (megapa) in my country; ---In order to maintain the consistency of the symbols in the standard, change the dn of item d) in Article 8.1 to de; --- Corresponding to the text of the standard "unless the relevant standards provide otherwise, X should be 10%, Y should be 5%", the formula (1) X/100 is changed to X, and Y/100 in formula (2) is changed to Y; --- To be consistent with the formula (2) in 8.2, modify the example in 8.2.lSO=1100-(1100×5/100)=1045mm, and modify it to. lSO =1100-(1000×5/100)=1050mm. Please note that certain contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This standard was proposed by the China National Light Industry Council. This standard is under the jurisdiction of the National Standardization Technical Committee for Plastic Products (SAC/TC48). Drafting organizations of this standard. Beijing Building Materials Inspection and Research Institute Co., Ltd. (National Water-saving Appliance Product Quality Supervision and Inspection Center), Yonggao Co., Ltd., Chinaust Plastic Products Co., Ltd., Zhejiang Zhongcai Pipeline Technology Co., Ltd., Baoding Lida Plastic Co., Ltd., North Beijing Technology and Business University (Light Industry Plastics Processing and Application Research Institute), National Chemical Building Materials Testing Center (Material Testing Department), Tianjin Tianyou Construction Design Co., Ltd., Shandong Dongxin Plastic Co., Ltd., Hangzhou Unicom Pipe Industry Co., Ltd., Liaocheng University, Baolu Qixing Pipe Industry Co., Ltd. Division, Chengde Precision Testing Machine Co., Ltd. The main drafters of this standard. Li Yanjun, Huang Jian, Li Yu, Wang Baiti, Yang Xuanning, Xiang Aimin, Zhang Wei, Liu Bing, Pan Fuqu, Chen Yiming, Teng Mouyong, Xu Hongyue and Wang Xinhua. Pressureless thermoplastic piping system for underground use Test method for sealing performance of elastic sealing ring joints

1 Scope

This standard specifies the test method for the sealing performance of elastic sealing ring joints of buried non-pressure thermoplastic piping systems. Unless otherwise specified in the relevant standards, the test is carried out under the following three pressures. ---p1.Internal negative pressure (partial vacuum); ---p2.Lower internal hydrostatic pressure; ---p3.Higher internal hydrostatic pressure. This standard also specifies the following 4 test conditions. a) Condition A. No radial deformation and axial deflection; b) Condition B. There is radial deformation; c) Condition C. There is an axial deflection angle; d) Condition D. There is axial deflection and radial deformation. The test pressure and test conditions shall be implemented in accordance with relevant standards.

2 Normative references

There are no normative references in this document.

3 Terms and definitions

There are no terms and definitions that need to be defined in this document.

4 Principle

Apply the specified internal negative air pressure p1 to the pipe and/or pipe assembly, then apply a lower internal hydrostatic pressure p2, and finally apply Higher internal hydrostatic pressure p3. During the test, radial deformation and/or axial deflection of the joint may occur. It can also be tested according to the pressure and conditions specified in the relevant standards. Each test pressure should be kept constant within a specified time, and joint leakage should be monitored during the pressure holding process (see Chapter 8). The following test parameters are implemented in accordance with relevant standards. a) Test pressure p1[see 8.1e)], p2[see 8.1g)] and p3[see 8.1h)], where applicable, also include the percentage of vacuum loss [see 8.1e)]; b) The required radial deformation, axial deflection angle or a combination thereof, and test pressure.

5 equipment

5.1 General requirements The test equipment includes fixtures or other devices and should meet the following requirements. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 39383-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 39383-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 39383-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 39383-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.