GB/T 3903.7-2019 PDF EnglishUS$95.00 · In stock · Download in 9 seconds
GB/T 3903.7-2019: Footwear - Test methods for whole shoe - Ageing conditioning Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 3903.7: Historical versions
Similar standardsGB/T 3903.7-2019: Footwear - Test methods for whole shoe - Ageing conditioning---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3903.7-2019Footwear - Test methods for whole shoe - Ageing conditioning ICS 61.060 Y78 National Standards of People's Republic of China Replace GB/T 3903.7-2005 Footwear test method (ISO 20870.2017, Footwear-Ageingconditioning, IDT) Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued ForewordThis part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 3903.7-2005 "Aging treatment of general test methods for footwear", compared with GB/T 3903.7-2005, the main The technical changes are as follows. --- Revised the normative reference document (see Chapter 2, Chapter 2 of the.2005 edition); --- Revised terms and definitions (see Chapter 3, Chapter 3 of the.2005 edition); --- Revised the test report (see Chapter 8, Chapter 8 of the.2005 edition); --- The full text changes "heating aging" to "dry heat aging"; "humidification aging" is modified to "wet heat aging". This section uses the translation method equivalent to ISO 20870.2017 "shoe aging treatment". The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows. ---GB/T 22049-2019 Standard environment for environmental conditioning and testing of footwear footwear and footwear components (ISO 18454.2018, IDT); ---GB/T 22050-2008 Sampling position, preparation and environmental adjustment time of footwear samples and samples (ISO 17709.2004, IDT). This section has made the following editorial changes. --- In line with the existing standard series, the standard name was changed to "aging treatment of footwear whole shoes test method". Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This part was proposed by the China Light Industry Federation. This part is under the jurisdiction of the National Technical Committee for the Standardization of Footwear (SAC/TC305). This section drafted by. China Leather Shoes Research Institute Co., Ltd., Quanzhou Ryukyu Shoes Co., Ltd., Jihua 3515 leather shoes Limited. The main drafters of this section. Shao Lijun, Yang Yumei, Zhou Sujing, Chen Jingyi, Wu Ting. The previous versions of the standards replaced by this section are. ---GB/T 3903.7-2005. Footwear test method1 ScopeThis part of GB/T 3903 specifies test methods for simulating the effects of naturally occurring reactions. Determination of the sample before and after the aging treatment Physical properties. The effect of aging treatment on any physical properties of the sample may be determined.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 17709 Sampling position, preparation and environmental conditioning time for footwear samples and specimens (Footwear-Samplinglocation, Preparationanddurationofconditioningofsamplesandtestpieces) ISO 18454 Standard environment for environmental conditioning and testing of footwear footwear and footwear components (Footwear-Standardatmospheres Forconditioningandtestingoffootwearandcomponentsforfootwear)3 Terms and definitionsThe terms and definitions defined by ISO 17709 and ISO 18454 apply to this document. The ISO and IEC standardized terminology database addresses are as follows.4 Test equipment and materials4.1 Dry heat aging test 4.1.1 The oven has a forced circulation system that maintains the temperature within the range of (70 ± 2) °C. 4.2 Damp heat aging test 4.2.1 Aging test equipment shall be sized to ensure that the total volume of the sample does not exceed 10% of the free air space. The sample is completely free to stretch, All parts of the sample are in aging air and placed in the dark. 4.2.2 Glass container, placed in a glass container with a suitable plug to place the sample, so that the sample to be tested is in the air with a relative humidity of 100%, with water Use a bath or oven to heat the glass container and keep it at (70 ± 2) °C.5 Sampling and environmental conditioningThe selection of the number, size and shape of the sample is determined by the nature of the test, and the specific test specified in ISO 17709 prior to the aging test. The sample size is sampled.6 test stepsPhysical properties are measured after environmental conditioning, and the specimens should be placed in an aging environment immediately. Dry heat aging process and wet heat The time of the process is (168 ± 2) h. After the aging treatment, the sample was adjusted for 24 h according to ISO 18454 before the test.7 test results expressionThe rate of change X of the sample performance is expressed as a percentage (%) and is calculated according to formula (1). X= Xa-X0 X0 × 100% (1) In the formula. Xa---the average performance value after aging; X0---the average performance value before aging.8 test reportThe test report should include the following. a) the number of this part; b) detail the nature of the sample; c) a reference to this test method; d) test results, as indicated in Chapter 7; e) indicates whether it is a dry heat aging test or a damp heat aging test; f) determine its individual performance before and after aging, and indicate the change in performance as a percentage, where appropriate; g) the date of the test; h) Standard environmental conditions observed during the test. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 3903.7-2019 be delivered?Answer: The full copy PDF of English version of GB/T 3903.7-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 3903.7-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3903.7-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 3903.7-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 3903.7-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3903.7-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 3903.7-2019?A step-by-step guide to download PDF of GB/T 3903.7-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 3903.7-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
