GB/T 38533-2020 English PDF

US$709.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38533-2020: Injection moulding machines for rubber and plastics - Mould fixing and connection dimensions
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 38533-2020	709	Add to Cart	6 days	Injection moulding machines for rubber and plastics - Mould fixing and connection dimensions	Valid

Similar standards

GB/T 45132   GB/T 25156   GB/T 32662   GB/T 32456   GB/T 45337   

Basic data

Standard ID: GB/T 38533-2020 (GB/T38533-2020)
Description (Translated English): Injection moulding machines for rubber and plastics - Mould fixing and connection dimensions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G95
Classification of International Standard: 71.120; 83.00
Word Count Estimation: 38,375
Date of Issue: 2020-03-06
Date of Implementation: 2021-02-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 38533-2020: Injection moulding machines for rubber and plastics - Mould fixing and connection dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Injection moulding machines for rubber and plastics--Mould fixing and connection dimensions ICS 71.120; 83.200 G95 National Standards of People's Republic of China Rubber plastic injection molding machine mold fixing and connection dimensions 2020-03-06 release 2021-02-01 implementation State Administration of Market Supervision Published by the National Standardization Administration

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Petroleum and Chemical Industry Federation. This standard is under the jurisdiction of the National Rubber and Plastic Machinery Standardization Technical Committee (SAC/TC71). This standard was drafted. Guangdong Yizhimi Precision Injection Technology Co., Ltd., Borch Intelligent Equipment Co., Ltd., Haitian Plastic Machinery Group Co., Ltd., Yuyao Huatai Rubber & Plastic Machinery Co., Ltd., Tairui Machinery Co., Ltd., Donghua Machinery Co., Ltd., Ningbo Lijin Machinery Co., Ltd. Company, Shandong Tongjia Intelligent Equipment Co., Ltd., Demag Plastic Machinery (Ningbo) Co., Ltd., Zhende Plastic Machinery Co., Ltd., Shunde District, Foshan City Company, Beijing Rubber Industry Research and Design Institute Co., Ltd., China Plastic Machinery Industry Association. The main drafters of this standard. Jiang Xiaojun, Li Qing, Li Chongde, Wu Jun, Kong Wanjun, Zhou Hongwei, Yan Houming, Zhou Gang, Dai Qiang, Jin Jingming, Liang Jianmin, He Cheng, Li Chunyan, Wang updated. Rubber plastic injection molding machine mold fixing and connection dimensions

1 Scope

This standard specifies the mold fixing dimensions, mold fixing holes, T-slots, and ejection holes for the molds of rubber and plastic injection molding machines. This standard applies to rubber or plastic injection molding machines with four or no tie bars with horizontal or vertical mold clamping devices, hereinafter referred to as Injection molding machine. This standard does not apply to mold fixing holes and T-slots with two or three tie rods and machines with rotating or multi-station table Related applications.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 158 machine tool table T-slots and corresponding bolts GB/T 36587 Terminology of rubber and plastic machinery

3 terms and definitions

The terms and definitions defined in GB/T 36587 and the following apply to this document. 3.1 Fixingholes Threaded holes for fixing the mold on the fixed template and the movable template. 3.2 T-slots T-slots for fixing molds on fixed and movable plates. 3.3 Ejector hole Holes on the movable template for passing the ejector rod. 3.4 Mold fixing dimensions The relevant die fixing and coupling dimensions are determined by the larger inner rod e1 and the smaller inner rod e2.

4 Mould fixed size

The fixed size of the mold is divided into numerical values using a smaller inner distance e2 (see Table 1) .The clamping device with four tie rods is shown in Figure 1, without pulling. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 38533-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 38533-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 38533-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 38533-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.