GB/T 38397-2019 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38397-2019: Coal tar - Determination of component content - Gas chromatography-mass spectrometry and thermogravimetry
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 38397-2019	119	Add to Cart	3 days	Coal tar - Determination of component content - Gas chromatography-mass spectrometry and thermogravimetry	Valid

Similar standards

GB/T 18255   GB/T 38772   GB/T 2293   GB/T 38395   GB/T 38394   

Basic data

Standard ID: GB/T 38397-2019 (GB/T38397-2019)
Description (Translated English): Coal tar - Determination of component content - Gas chromatography-mass spectrometry and thermogravimetry
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G18
Classification of International Standard: 71.080
Word Count Estimation: 6,623
Date of Issue: 2019-12-31
Date of Implementation: 2020-07-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 38397-2019: Coal tar - Determination of component content - Gas chromatography-mass spectrometry and thermogravimetry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coal tar-Determination of component content-Gas chromatography-mass spectrometry and thermogravimetry ICS 71.080 G18 National Standards of People's Republic of China Determination of coal tar component content Gas chromatography-mass spectrometry and thermogravimetric analysis 2019-12-31 release 2020-07-01 implementation State Administration of Market Supervision Published by the National Standardization Administration

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by China Iron and Steel Industry Association. This standard is under the jurisdiction of the National Coal Chemical Standardization Technical Committee (SAC/TC469). This standard was drafted. Northwest University, Metallurgical Industry Information Standards Research Institute, Dalian Honghe Petroleum Analysis Instrument Co., Ltd., Anshan Iron & Steel Co., Ltd. Limited company. The main drafters of this standard. Sun Ming, Ma Xiaoxun, Zheng Jingxu, Guan Yongyi, Zhang Mingming, Mu Chunfeng, Wang Xiaonan, Dong Xiaofeng, Bayan Gaole. Determination of coal tar component content Gas chromatography-mass spectrometry and thermogravimetric analysis Caution --- Some reagents used in this standard are toxic or corrosive, and some operations are dangerous such as radioactivity and burns. This standard The standard does not reveal all possible safety issues. Users should exercise caution and have the responsibility to take appropriate safety precautions when operating.

1 Scope

This standard specifies the principles, reagents and materials, instruments and equipment, sample preparation, test procedures, and results for determining the content of compounds in coal tar. Calculations, method precision and test reports. This standard is applicable to common compounds (such as 1,2-dimethylbenzene, phenanthrene, Determination of C22 alkanes, 1,2,3-trimethylnaphthalene, 2,4-dimethylphenol, 1-methylnaphthol, 1,3-dimethylnaphthol, etc.). Coal extract, raw Oil, biomass pyrolysis oil, etc. can be used by reference.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 260-2016 Petroleum products-Determination of water content-Distillation method GB/T 1999 Coking oil products sampling method GB/T 8170 Numerical rounding rules and expression and judgment of limit values

3 Principle

The gas chromatography-mass spectrometer uses a turbo molecular pump and a fore vacuum pump to form a two-stage vacuum unit.The samples to be analyzed are passed through The sample is injected into the gas chromatograph by the sampler, separated by a capillary column, and ionized into the ion source of the mass spectrometer to generate positive ions. The positive and negative electrodes send positive ions into the quadrupole system.The quadrupole forms high-frequency electricity under the combination of high-frequency voltage and positive and negative voltage. Field, under the action of the scanning voltage, the ions reach the ion detector through the center of symmetry of the quadrupole, and then amplified by the ion current amplifier to generate a mass spectrum signal No., and then get the mass spectrum. By searching with the compound standard library, the constituents and relative contents of unknown samples were identified. The thermogravimetric analyzer uses a program temperature controller to make the heating electric furnace heat up at a certain heating rate.When the mass of the measured sample changes, the light The electric sensor can convert the mass change into a direct current signal.The signal is amplified by the weighing amplifier and then fed back to the balance moving coil to generate a reaction. The electromagnetic moment is driven to reset the balance beam, and the potential difference formed by the feedback is proportional to the mass change. Weight loss curve, and then get the mass loss of the measured sample and the final weight loss rate at the specified temperature. The gas chromatograph-mass spectrometer and thermogravimetric analyzer use the same temperature rising procedure.According to the thermal weight loss data of the coal tar sample tested, The mass of the vaporized part and the final thermal weight loss rate are obtained, and the real sample that enters the gas chromatography-mass spectrometer for detection is obtained indirectly. Amount (vaporized part), and the mass of the sample remaining in the glass liner (non-vaporized part), so as to obtain the components of the coal tar (vaporization temperature ≤300 ℃).

4 Reagents and materials

4.1 Dichloromethane. analytical grade. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 38397-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 38397-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 38397-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 38397-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.