GB/T 38064-2019 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 38064-2019: Ball mill grinding system - Test method for grindability of materials
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 38064-2019	199	Add to Cart	3 days	Ball mill grinding system - Test method for grindability of materials	Valid

Similar standards

IOT-GUIDELINES   JB/T 14329   GB/T 25708   GB/T 45687   GB/T 45689   

Basic data

Standard ID: GB/T 38064-2019 (GB/T38064-2019)
Description (Translated English): Ball mill grinding system - Test method for grindability of materials
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: D94
Classification of International Standard: 73.120
Word Count Estimation: 10,183
Date of Issue: 2019-10-18
Date of Implementation: 2020-05-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 38064-2019: Ball mill grinding system - Test method for grindability of materials

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ball mill grinding system--Test method for grindability of materials ICS 73.120 D94 National Standards of People's Republic of China Ball mill grinding system Mineral material grindability test method Published on.2019-10-17 2020-05-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Mining Machinery Standardization Technical Committee (SAC/TC88). This standard was drafted. Luoyang Mining Machinery Engineering Design and Research Institute Co., Ltd., Huaibei Mining Machinery Manufacturing Co., Ltd., Zhejiang Mining Machinery Co., Ltd., CITIC Heavy Industry Machinery Co., Ltd., State Key Laboratory of Heavy Equipment for Mines. The main drafters of this standard. Yang Jichang, Yang Xianli, Hu Shanhong, Dai Sujiang, Pan Weining, Li Congjun, Chen Weixin, Tong Lijuan, Wang Yazhen, Wang Yadong, Hu Xilei. Ball mill grinding system Mineral material grindability test method

1 Scope

This standard specifies the terms and definitions, test principles, test equipment, and sample system for the test method for the grindability of mineral materials in ball milling systems. Preparation, test procedures and test results. This standard is applicable to the ball mill grinding system of raw materials such as ore, medium ore and smelting products of metal and non-metal minerals. Determination of sex.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 6003.1 Test sieves - Technical requirements and testing - Part 1

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Ball milling index balmilworkindex Based on the index of FCBond's pulverization theory, it characterizes the ball-grinding wearability of mineral raw materials. 3.2 Feeding size thesizeofthemilfeed F80 The size of the square hole mesh when the feed rate of the ore sample is 80%. Note. The unit is micrometer (μm). 3.3 Product size thesizeofthemilproduct P80 The square hole mesh size when the grinding product pass rate is 80%. Note. The unit is micrometer (μm). 3.4 Cyclic load circulatingload In the material of the mill, it is necessary to return the ratio of the coarse powder quality of the mill to the fine powder quality of the finished sieve. 3.5 Equilibrium state After three consecutive grindings, the cycle load is consistent with (250±5)%, and the difference in the quality of the finished product per revolution of the mill is less than the average value. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 38064-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 38064-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 38064-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 38064-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.