GB/T 37779-2019 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37779-2019: Implementation guidance for energy management system in data centers
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37779-2019	599	Add to Cart	5 days	Implementation guidance for energy management system in data centers	Valid

Similar standards

GB 37483   GB 37480   GB 37484   GB 19762   GB 17167   

Basic data

Standard ID: GB/T 37779-2019 (GB/T37779-2019)
Description (Translated English): Implementation guidance for energy management system in data centers
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: F01
Classification of International Standard: 27.010
Word Count Estimation: 30,327
Date of Issue: 2019-08-30
Date of Implementation: 2020-03-01
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37779-2019: Implementation guidance for energy management system in data centers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Implementation guidance for energy management system in data centers ICS 27.010 F01 National Standards of People's Republic of China Data Center Energy Management System Implementation Guide Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Energy Management System 2 4.1 General 2 4.2 Management responsibilities 2 4.3 Energy Policy 3 4.4 Planning 3 4.5 Implementation and operation 10 4.6 Inspection and Correction 16 4.7 Management Review 16 Appendix A (informative) Data Center Energy Management System Planning Example 17 Appendix B (informative) Data center energy efficiency calculation example 24

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the Department of Resource Conservation and Environmental Protection of the National Development and Reform Commission and the Department of Energy Conservation and Comprehensive Utilization of the Ministry of Industry and Information Technology. This standard is under the jurisdiction of the National Energy Foundation and Management Standardization Technical Committee (SAC/TC20). This standard was drafted. China National Institute of Standardization, China Telecom Post and Telecommunications Consulting and Design Institute Co., Ltd., Shanghai Data Port Co., Ltd. Inspur Electronic Information Industry Co., Ltd., Zhongneng Shensi (Beijing) Energy Saving Technology Co., Ltd., Baidu Online Network Technology (Beijing) Co., Ltd. Division, China Institute of Metrology, Intel (China) Co., Ltd., Schneider Electric Information Technology (China) Co., Ltd., China Architectural Design Research Institute Co., Ltd., China Electronic Systems Engineering Second Construction Co., Ltd., Shandong Maigang Data System Co., Ltd., Shandong Province Standardization Research Research Institute. The main drafters of this standard. Wang Wei, Li Hongxia, Wang Haifeng, Zhao Jiang, Wang Wei, Peng Yuanbo, Wu Hao, Yi Ming, Li Shuguang, Lao Yimin, Shen Tianhong, Zhang Baoguo, Xiong Shaodong, Pan Wei, Ma Yibo, Hou Yu.

Introduction

This standard is the implementation guide of GB/T 23331-2012 in the data center, which aims to guide the establishment, implementation, maintenance and implementation of data center specifications. Improve its energy management system and continuously improve its energy performance. This standard is based on GB/T 29456-2012, according to the data center The characteristics of planning, construction and operation and maintenance have been highlighted in the process of planning, implementing and inspecting the implementation of the energy management system in the data center. This standard refers to the energy system of the data center as shown in Figure 1, which mainly includes. ---ICT equipment. equipment used for computing, communication, storage, etc.; ---Air conditioning system. including refrigeration unit, cooling capacity distribution system, etc.; ---ICT equipment power system. including UPS, column head cabinet, etc.; ---Other auxiliary systems. except for ICT equipment, air conditioning systems, ICT equipment power systems, such as power distribution systems, lighting Systems, monitoring systems, building automation systems, self-contained power supplies, associated renewable energy facilities, cogeneration facilities, etc. Figure 1 Schematic diagram of the energy system of the data center Note. Data center energy can include different forms, such as electricity, gas, fuel, external cold and heat sources, etc.; can have different sources, such as from the public grid, number According to the center's own power supply, external gas pipeline network, municipal water pipe network, auxiliary renewable energy facilities, cold and heat electricity triple supply system, data center construction Building air conditioning systems, etc.; residual energy can have different output destinations, such as recycling within the system boundary or sending it outside the system boundary Other users use it. In the case of system residual energy recovery, if the residual energy is utilized within the system boundary, the corresponding input energy amount EIN will Reduction, the energy efficiency improvement effect is reflected in the reduction of EIN; if the residual energy output is outside the boundary range and is used by other users, the output boundary of the part is The residual energy outside is called EOUT. Data Center Energy Management System Implementation Guide

1 Scope

This standard proposes the systematic establishment, implementation, maintenance and improvement of its energy management system in accordance with GB/T 23331-2012. Guidance recommendations. This standard applies to all types of fixed data centers, mobile data centers can refer to implementation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 7119 Water-saving Enterprise Evaluation Guidelines GB/T 12497 three-phase asynchronous motor economic operation GB/T 13234 energy consumption calculation method GB/T 13462 power transformer economic operation GB/T 15316 Energy Conservation Monitoring Technology General GB/T 15910 thermal transmission system energy saving monitoring GB 17167 General rules for the provision and management of energy metering units GB 19762 Clear water centrifugal pump energy efficiency limit value and energy saving evaluation value GB/T 23331-2012 Energy Management System Requirements GB/T 29456-2012 Energy Management System Implementation Guide GB/T 31347 Energy Measurement and Verification Technology Requirements Communication Room Project GB 50034 Architectural Lighting Design Standard GB 50174 Data Center Design Specification GB 50189 Public building energy-saving design standards GB 50411 Construction Energy Conservation Engineering Construction Quality Acceptance Specification GB 50462 Data Center Infrastructure Construction and Acceptance Specifications GB 50710 Electronic Engineering Energy Saving Design Specification JR/T 0011 Bank Centralized Data Center Specification SL604 Water Conservancy Data Center Management Regulations YD/T 2442 Internet data center resource occupancy, energy efficiency and emission technical requirements and evaluation methods YD/T 2542 Telecommunications Internet Data Center (IDC) General Technical Requirements YD/T 2543 Telecom Internet Data Center (IDC) energy consumption assessment method YD5193 Internet Data Center (IDC) Engineering Design Specification YD5194 Internet Data Center (IDC) Engineering Acceptance Specification

3 Terms and definitions

The following terms and definitions as defined in GB/T 23331-2012 apply to this document. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37779-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37779-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37779-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37779-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.