GB/T 37698-2019 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37698-2019: Additive manufacturing - Design - Requirements, guidelines and recommendations
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 37698-2019	599	Add to Cart	5 days	Additive manufacturing - Design - Requirements, guidelines and recommendations	Valid

Similar standards

GB/T 38238   GB/T 37400.5   GB/T 37122   GB/T 30565   GB/T 19799.3   

Basic data

Standard ID: GB/T 37698-2019 (GB/T37698-2019)
Description (Translated English): Additive manufacturing - Design - Requirements, guidelines and recommendations
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 25.030
Word Count Estimation: 30,360
Date of Issue: 2019-06-04
Date of Implementation: 2019-06-04
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 37698-2019: Additive manufacturing - Design - Requirements, guidelines and recommendations

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Additive manufacturing--Design--Requirements, guidelines and recommendations ICS 25.030 J04 National Standards of People's Republic of China Additive manufacturing design requirements, guidelines and recommendations (ISO /ASTM52910..2018, MOD) Published on.2019-06-04 Implementation of.2019-06-04 State market supervision and administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Purpose Overview 2 5 Design advantages and constraints 6 6 Design factor 8 7 Designer Considerations 20 Appendix A (informative) Structural changes in this standard compared to ISO /ASTM52910.2018 22 Appendix B (informative) The technical differences between this standard and ISO /ASTM52910.2018 and their causes 23 Reference 24

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the redrafting method to modify the use of ISO /ASTM52910..2018 "additive manufacturing design requirements, guidelines and recommendations." This standard has more structural adjustments than ISO /ASTM52910.2018. Appendix A lists this standard and ISO /ASTM. 52910.2018 chapter number comparison list. There are technical differences between this standard and ISO /ASTM52910.2018. The corresponding technical differences and their originals are given in Appendix B. List of factors. This standard also made the following editorial changes. ---According to China's national conditions, 6.2.4 replaced the ISO /" with the National Plastics Standardization Technical Committee (SAC/TC48)" ASTM52910. "ASTM Committee D20" in 6.4.4 of.2018; --- ISO /ASTM52910.2018 6.6.8 and 6.9.2 normative references but not included in Chapter 2 ISO /ASTM 52901 is listed in Chapter 2; --- Removed the example sentence in 6.7.1 of ISO /ASTM52910.2018 "Similarly, standards for the characteristics of raw materials are being developed, such as Metal powder for powder bed melting process (see ASTM F3049-14)"; --- Removed the future possible standards in ISO /ASTM52910.2018, 6.7.2.1 and the example sentence "Comprehensive classification of materials" The standard will be released, and the standard may include some elements of this section. For example, ASTMF3122-14 is an evaluation of additive manufacturing. Guide to the mechanical properties of metal parts"; --- In the reference, the normative reference document ISO /ASTM52900 referenced in the body has been deleted, adding the text mentioned in the text Reference standard GB/T 16288. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Additive Manufacturing Standardization Technical Committee (SAC/TC562). This standard was drafted. Hunan Huasheng High-Tech Co., Ltd., China Machine Productivity Promotion Center, Wuxi City Product Quality Supervision and Inspection Institute, Shanghai Materials Research Institute, Wuhan Huake 3D Technology Co., Ltd., Beijing Yijia 3D Technology Co., Ltd., Nanjing Zhongkehao Laser Technology Co., Ltd., Mechanical Science Research Institute Group Co., Ltd., Qingdao Sandi Time and Space Additive Manufacturing Co., Ltd., Beijing Xinghang Electromechanical Equipment Co., Ltd. Company, Qingdao Haier Intelligent Technology Development Co., Ltd., Shandong Chuangrui Additive Manufacturing Quality Technology Innovation Research Institute Co., Ltd. The main drafters of this standard. Xu Xiaoying, Xue Lian, Ma Yubin, Li Haibin, Gu Zheming, Wen Shifeng, Tan Pengcheng, Zhang Guoqing, Brilliance, Shan Zhongde, Li Peixue, Li Mingliang, Liu Yonghui, Lu Zhongli. Additive manufacturing design requirements, guidelines and recommendations Caution - This standard does not support handling all security issues and may only contain issues related to security use. Users of this standard Responsible for establishing appropriate safety and health measures prior to use and determining the suitability of their limitations.

1 Scope

This standard gives the requirements, guidelines and recommendations for the design of additive manufacturing products. This standard applies to the design of various products, devices, systems, components or parts manufactured by any additive manufacturing system. This standard helps determine which design factors are utilized in a design project or which additive manufacturing processes are utilized. This standard provides guidance on common issues, but does not include specific design, process or material data. The use of this standard includes the following three categories. --- Designers of additive manufacturing products and their managers; --- Students who study mechanical design and computer-aided design; --- Developer of additive manufacturing design guide and design guidance system.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 228.1 tensile testing of metallic materials - Part 1. Test methods for room temperature (GB/T 228.1-2010, ISO 6892-1. 2009, MOD) Plastics -- Determination of density of non-foam plastics -- Part 1 . Dipping method, liquid pycnometer method and titration method (GB/T 1033.1-2008, ISO 1183-1.2004, IDT) GB/T 1034 Determination of water absorption of plastics (GB/T 1034-2008, ISO 62.2008, IDT) Determination of tensile properties of plastics - Part 2. Test conditions for moulding and extruded plastics (GB/T 1040.2- 2006, ISO 527-2..1993, IDT) GB/T 1041 Determination of compression properties of plastics (GB/T 1041-2008, ISO 604.2002, IDT) GB/T 1408.1 Test methods for electrical strength of insulating materials - Part 1. Tests under power frequency (GB/T 1408.1-2016, IEC 60243-1.2013, IDT) GB/T 1409 Measure the permittivity and dielectric loss factor of electrical insulating materials at power frequency, audio, high frequency (including meter wave wavelength) Recommended method (GB/T 1409-2006, IEC 60250. 1969, MOD) GB/T 1410 solid insulation material volume resistivity and surface resistivity test method (GB/T 1410-2006, IEC 60093. 1980, IDT) GB/T 1634.2 Determination of deformation temperature of plastics - Part 2. Plastics, hard rubber and long fibre reinforced composites (GB/T 1634.2-2004, ISO 75-2.2003, IDT) GB/T 1843 Determination of impact strength of plastic cantilever beam (GB/T 1843-2008, ISO 180.2000, IDT) GB/T 2039 uniaxial tensile creep test method for metallic materials (GB/T 2039-2012, ISO 204.2009, MOD) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 37698-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 37698-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 37698-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 37698-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.