GB/T 3764-2008 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3764-2008: 24-degree cone connectors -- Ferrule
Status: Valid

GB/T 3764: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3764-2008	139	Add to Cart	3 days	24-degree cone connectors -- Ferrule	Valid
GB/T 3764-1983	199	Add to Cart	2 days	Ferrule	Obsolete

Similar standards

GB/T 1048   GB/T 1047   GB/T 4622.1   GB/T 3755   GB/T 3756   GB/T 3754   

Basic data

Standard ID: GB/T 3764-2008 (GB/T3764-2008)
Description (Translated English): 24-degree cone connectors -- Ferrule
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J15
Classification of International Standard: 21.060.60
Word Count Estimation: 6,674
Date of Issue: 2008-05-07
Date of Implementation: 2008-11-01
Older Standard (superseded by this standard): GB/T 3764-1983
Quoted Standard: GB/T 3765-2008
Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the size of the card sets, marking and technical requirements. This standard applies to pipe outside diameter 4mm ~ 42mm, the maximum working pressure of 10MPa ~ 63MPa hydraulic fluid power and general -purpose pipeline system.

GB/T 3764-2008: 24-degree cone connectors -- Ferrule

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
24-degree cone connectors. Ferrule ICS 21.060.60 J15 National Standards of People's Republic of China Replacing GB/T 3764-1983 card cover Posted 2008-05-07 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is one bite type pipe fittings series. 8434-1 this standard pipe joint structure type and size ISO .2007 "first metal pipe fittings for fluid power and general use Part 1. 24 ° compression fittings "(in English) of the relevant part of the basic agreement. This standard is GB/T 3764-1983 "ferrule" amendments. The main amendments are. --- Modify the English name; --- Increasing the ferrule end and fitting dimensions; --- The nominal pressure G (250) and J (400) to modify the maximum working pressure of 10MPa ~ 63MPa, and is divided into LL, L and S three Series, series product size range of adjustment has been made; --- Reducing the parameters should be part of the manufacturer's control; --- Cancel the weight data; --- Cancel the marked surface roughness, surface roughness is given in GB/T 3765 "bite type pipe joint technical conditions" in. From the date of implementation of this standard instead of GB/T 3764-1983. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard is drafted by. The machine Productivity Promotion Center, Haiyan Pipe Manufacturing Co., Ltd. Haiyan high Bo tube. Participated in the drafting of this standard. Eaton (Ningbo) fluid connector Ltd., Zhejiang China Valve Co., Ltd., Jiaxing Mai Site fittings Manufacturing Co., Ltd., Jianhu particularly good hydraulic pipe fittings Co., Ltd., Haiyan tube Manufacturing Co., Ltd., Jiaozuo City, has lead to the hydraulic attachment Limited. The main drafters of this standard. Gengzhi science, Ruanhao Feng, Xuchang Xiang, Li Weirong, Li Junying, Zhou Shunhua, Tao Zhongming, Zuo Jun, Zhou Jianfei, Wang Limin, Feng Feng. This standard replaces the standards previously issued as follows. --- GB/T 3764-1983. card cover

1 Scope

This standard specifies the dimensions, marking and technical requirements of the ferrule. This standard applies to pipe outside diameter 4mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 63MPa Purpose pipeline system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3765-2008 bite type tube fittings

3 Dimensions

Ferrules and ferrule end dimensions shall comply with Figure 1 and Table 1.

4 Mark

4.1 labeling method Card sleeve labeling method shall comply with GB/T 3765's. 4.2 tag example Card sets series L, card sets marked with an outer diameter of 10mm supporting the use of. Card sets GB/T 3764 L10

5 Technical requirements

Technical requirements according to the provisions of GB/T 3765's. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3764-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3764-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3764-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3764-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3764-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3764-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.