GB/T 3754-2008 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3754-2008: 24-degree cone connectors -- Swivel elbow with O-ring
Status: Valid

GB/T 3754: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3754-2008	139	Add to Cart	3 days	24-degree cone connectors -- Swivel elbow with O-ring	Valid
GB/T 3754.1-1983	199	Add to Cart	2 days	Straight thread connector for butt joints--Assembly	Obsolete

Similar standards

GB/T 1048   GB/T 1047   GB/T 4622.1   GB/T 3745   GB/T 3746   GB/T 3744   

Basic data

Standard ID: GB/T 3754-2008 (GB/T3754-2008)
Description (Translated English): 24-degree cone connectors -- Swivel elbow with O-ring
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J15
Classification of International Standard: 21.060.60
Word Count Estimation: 6,627
Date of Issue: 2008-05-07
Date of Implementation: 2008-11-01
Older Standard (superseded by this standard): GB/T 3754.1-1983; GB/T 3754.2-1983
Quoted Standard: GB/T 3758-2008; GB/T 3759-2008; GB/T 3764-2008; GB/T 3765-2008
Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the size of the card sets cone seal assembly elbow pipe joints and fittings body, marking and technical requirements. This standard applies to the pipe diameter of 6mm ~ 42mm, the maximum working pressure of 10MPa ~ 63MPa hydraulic fluid power and general -purpose pipeline system.

GB/T 3754-2008: 24-degree cone connectors -- Swivel elbow with O-ring

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
24-degree cone connectors. Swivel elbow with O-ring ICS 21.060.60 J15 National Standards of People's Republic of China Replacing GB/T 3754.1-1983, GB/T 3754.2-1983 Card sets of tapered seal assembly elbow fittings Posted 2008-05-07 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is one bite type pipe fittings series. 8434-1 this standard pipe joint structure type and size ISO .2007 "first metal pipe fittings for fluid power and general use Part 1. 24 ° compression fittings "(in English) of the relevant part of the basic agreement. This standard is GB/T 3754.1-1983 "card sets of pipe joints straight butt end" and GB/T 3754.2-1983 "end-to-card sets Connected through connector body. "Amendments. The main amendments are as follows. --- The contents of the two standards were revised to integrate, cancel the type and size of the original standard, provides sealing cone sleeve type group Co-elbow pipe joint type and size; --- Modify the Chinese and English names. The use of standard GB/T 3754-2008 standard number, intended to reflect the bite type pipe joint standard series, but this standard access Head type and original standard connector types are not interchangeable. Since the implementation of this standard replaces GB/T 3754.1-1983 and GB/T 3754.2-1983. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard is drafted by. Productivity Promotion Center in the machine. Participated in the drafting of this standard. Haiyan Pipe Manufacturing Co., Eaton (Ningbo) fluid connector Ltd., Jiaxing Mai Site fittings Manufacturing Co., Ltd., Jianhu particularly good hydraulic pipe fittings Co., high-Bo Haiyan Pipe Co., Ltd., Haiyan tube Manufacturing Co., Zhejiang Huaxia Valve Co., Ltd. Jiaozuo City roads lead to hydraulic attachments. The main drafters of this standard. Li Weirong, Xuchang Xiang, Li Junying, Zhou Shunhua, Gengzhi school, Tao Zhongming, Zuo Jun, Ruanhao Feng, Zhou Jianfei, Wang Limin. This standard replaces the standards previously issued as follows. --- GB/T 3754.1-1983; --- GB/T 3754.2-1983. Card sets of tapered seal assembly elbow fittings

1 Scope

This standard specifies the dimensions, marking and technical requirements sleeve type cone seal assembly elbow fittings and joints of the body. This standard applies to the pipe diameter of 6mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 63MPa Purpose pipeline system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3758-2008 bite type fittings with cone seal welded takeover GB/T 3759-2008 bite type pipe joint connector nut GB/T 3764-2008 ferrule GB/T 3765-2008 bite type tube fittings

3 Dimensions

Cone size card sets seal assembly elbow fittings and joints shall conform to the body 1, the provisions of Figure 2 and Table 1, the end of the connector body sleeve size Shall comply with GB/T 3764's.

4 Mark

4.1 labeling method Card sets of tapered seal assembly elbow pipe fitting and mark the joint body should be consistent with the provisions of GB/T 3765's. 4.2 tag example Connector Series L, the pipe diameter of 10mm, steel sleeve type cone seal assembly surface of galvanized elbow fittings marked. Fittings GB/T 3754 L10 Connector Series L, the pipe diameter of 10mm, steel sleeve type cone seal assembly elbow joint surface galvanized marked. Joint body GB/T 3754 L10

5 Technical requirements

Technical requirements according to the provisions of GB/T 3765's. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3754-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3754-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3754-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3754-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3754-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3754-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.