GB/T 3753-2008 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3753-2008: 24-degree cone connectors -- Adjustable tee
Status: Valid

GB/T 3753: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3753-2008	139	Add to Cart	3 days	24-degree cone connectors -- Adjustable tee	Valid
GB/T 3753.1-1983	199	Add to Cart	2 days	Adjustable T-unions-Assembly	Obsolete

Similar standards

GB/T 1048   GB/T 1047   GB/T 4622.1   GB/T 3744   GB/T 3745   GB/T 3743   

Basic data

Standard ID: GB/T 3753-2008 (GB/T3753-2008)
Description (Translated English): 24-degree cone connectors -- Adjustable tee
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J15
Classification of International Standard: 21.060.60
Word Count Estimation: 6,690
Date of Issue: 2008-05-07
Date of Implementation: 2008-11-01
Older Standard (superseded by this standard): GB/T 3753.1-1983; GB/T 3753.2-1983
Quoted Standard: GB/T 3759-2008; GB/T 3764-2008; GB/T 3765-2008
Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the size of the card sets and connector combinations tee body, marking and technical requirements. This standard applies to the pipe diameter of 6mm ~ 42mm, the maximum working pressure of 10MPa ~ 63MPa hydraulic fluid power and general -purpose pipeline system.

GB/T 3753-2008: 24-degree cone connectors -- Adjustable tee

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
24-degree cone connectors. Adjustable tee ICS 21.060.60 J15 National Standards of People's Republic of China Replacing GB/T 3753.1-1983, GB/T 3753.2-1983 Card sets of combinations tee Posted 2008-05-07 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is one bite type pipe fittings series. This standard is GB/T 3753.1-1983 "card sets of combinations tee" and GB/T 3753.2-1983 "combination of three-card sets Revision way Connection "in. The main amendments are as follows. --- The two standard content integration; --- Modified Chinese and English name; --- The nominal pressure G (250) and J (400) to modify the maximum working pressure of 10MPa ~ 63MPa, and is divided into LL, L and S three Series, series product size range of adjustment has been made; --- The joint body size wrench to forging and machining two types; --- Adjust the size of the pipe diameter range, and revised the relevant size; --- Reducing the parameters should be part of the manufacturer's control; --- Cancel the weight data; --- Cancel the marked surface roughness, surface roughness is given in GB/T 3765 "bite type pipe joint technical conditions" in. Since the implementation of this standard replaces GB/T 3753.1-1983 and GB/T 3753.2-1983. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard is drafted by. Productivity Promotion Center in the machine, hydraulic annex Ltd. Jiaozuo City lead. Participated in the drafting of this standard. Haiyan Pipe Manufacturing Co., Eaton (Ningbo) fluid connector Ltd., Jiaxing Mai Site fittings Manufacturing Co., Ltd., Jianhu particularly good hydraulic pipe fittings Co., high-Bo Haiyan Pipe Fittings Co., Ltd., Zhejiang China Valve Co., Ltd., Haiyan Sea tube Manufacturing Co., Ltd. The main drafters of this standard. Li Weirong, Xuchang Xiang, Wang Limin, Gengzhi school, Zhou Shunhua, Tao Zhongming, Zuo Jun, Ruanhao Feng, Zhou Jianfei, Feng Feng. This standard replaces the standards previously issued as follows. --- GB/T 3753.1-1983; --- GB/T 3753.2-1983. Card sets of combinations tee

1 Scope

This standard specifies the dimensions, marking and technical requirements ferrule combo tee and the joint body. This standard applies to the pipe diameter of 6mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 63MPa Purpose pipeline system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3759-2008 bite type pipe joint connector nut GB/T 3764-2008 ferrule GB/T 3765-2008 bite type tube fittings

3 Dimensions

Size card sets of combinations tee fitting body and shall comply with Figure 1, the provisions of Figure 2 and Table 1, the end of the ferrule connector body size should be consistent GB/T 3764 provisions of.

4 Mark

4.1 labeling method Labeling method combination card sets tee and the joint body should be consistent with the provisions of GB/T 3765's. 4.2 tag example Connector Series L, the pipe diameter of 10mm, steel sleeve type coupling surface galvanized the tee markers are. Fittings GB/T 3753 L10 Connector Series L, the pipe diameter of 10mm, steel sleeve type combination tees galvanized surface marked. Joint body GB/T 3753 L10

5 Technical requirements

Technical requirements according to the provisions of GB/T 3765's. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3753-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3753-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3753-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3753-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3753-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3753-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.