GB/T 37445-2019 English PDFUS$414.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 37445-2019: Ships and marine technology - Marine environment protection - Arrangement and management of port waste reception facilities Status: Valid
Basic dataStandard ID: GB/T 37445-2019 (GB/T37445-2019)Description (Translated English): Ships and marine technology - Marine environment protection - Arrangement and management of port waste reception facilities Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U47 Classification of International Standard: 47.020.99 Word Count Estimation: 22,239 Date of Issue: 2019-05-10 Date of Implementation: 2019-12-01 Adopted Standard: ISO 16304-2018, IDT Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration Summary: This standard applies to ports and terminals of any size. This standard does not specify the size or location of the PRF in each port, but specifies the relevant principles that should be considered and can be applied to any size or type of port or terminal (e.g. boat docks, fishing ports, container terminals, oil terminals, Ro-Ro terminals, cruise terminals, ferry terminals, bulk or general cargo handling terminals, ship repair or recycling facilities, offshore terminals, etc.). This standard can also be applied to inland ports, small boat docks and ports that need to be configured with PRF according to regional arrangements. GB/T 37445-2019: Ships and marine technology - Marine environment protection - Arrangement and management of port waste reception facilities---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Ships and marine technology--Marine environment protection--Arrangement and management of port waste ICS 47.020.99 U47 National Standards of People's Republic of China Marine and marine technology marine environmental protection Arrangement and management of port waste receiving facilities (ISO 16304..2018, IDT) Published on.2019-05-10 2019-12-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Waste Management Strategy Element 3 4.1 General 3 4.2 Administrative and Legal Affairs 3 4.3 Technology 3 4.4 Infrastructure and Support Services 3 5 Design and operation of PRFs 3 5.1 General 3 5.2 Port Characteristics 4 5.3 Type 4 5.4 Waste characteristics 5 5.5 Receiving capacity 5 5.6 Waste treatment capacity 6 5.7 Participation in waste separation, recycling or treatment planning 6 6 Port Waste Management Plan (PWMP) 6 6.1 General 6 6.2 Legislation and provisions 7 6.3 Port organization and management 8 6.4 Official duties 9 6.5 Waste Management 10 6.6 Cost Recovery System - Financial Considerations 11 6.7 Data Acquisition and Monitoring 12 6.8 Advance and continuous consultation 12 6.9 Additional files 13 7 Implementation 13 7.1 General 13 7.2 PWMP check 13 7.3 Periodic review 13 Appendix A (informative) Ship Waste Example 15 Appendix B (informative) Waste conversion factor 18 Reference 19ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to ISO 16304.2018 "ship and marine technology marine environmental protection port waste reception Facilities layout and management. This standard has made the following editorial changes. ---6.4 The second-level column item symbol is adjusted from "-" to "·"; --- Tables in Appendix A and Appendix B add numbers and tables; --- Appendix A, the introduction of the guidance word "waste type and treatment plan see Table A.1"; --- Appendix B, the introduction of the guide "the conversion factor between waste volume and weight is shown in Table B.1". This standard is proposed and managed by the National Marine Machinery Standardization Technical Committee (SAC/TC137). This standard was drafted. China Shipbuilding Industry Comprehensive Technology and Economic Research Institute. The main drafters of this standard. Wang Huizhen, Wei Huaxing. Marine and marine technology marine environmental protection Arrangement and management of port waste receiving facilities1 ScopeThis standard provides methods for handling waste and cargo residues from ships when unloading and onshore management. Port reception The provision, operation and use of PRFs are intrinsically linked. This standard covers the design, operation and management of PRFs. Designed for this standard Ports and terminals for existing PRFs are designed to improve their systems; they can also be used in new ports and terminals where PRFs are being developed. The parties to the International Convention for the Prevention of Pollution from Ships (MARPOL) are responsible for ensuring the ports provided by their ports and terminals. Receiving facilities (PRFs) are sufficient to meet ship requirements without causing undue delays. In addition to the requirements of the receiving facility, MARPOL It does not limit the management of ships that discharge waste and cargo residues at ports and terminals, but ports and terminals may need to consider countries and regions. And local regulations. When these regulations may exceed MARPOL's scope, the International Maritime Organization (IMO) will unload at ports and terminals. Identification of the necessity of ship management of waste and cargo residues as part of environmental protection management measures to avoid, Reduce and eliminate pollution caused by ships. This standard applies to the management of waste and cargo residues specified by MARPOL at the port and terminal, including Develop various rules and issues to be considered during the Port Waste Management Plan (PWMP), PWMP implementation, and PRF operations. PRF Any operation should be determined by rules and procedures in the PWMP. The PRF operating procedure should be tightly integrated with the development of the PWMP. This standard specifies the relevant rules and matters in the following aspects. ---Development of port waste management strategies; ---PRF design and operation; ---The development, implementation and implementation of PWMP; ---PRF management and responsibility. This standard applies to ports and terminals of any size. This standard does not specify the size or location of the PRF in each port, but Provides relevant principles to consider and can be applied to ports or terminals of any size or type (eg marina, fishing port, container terminal, Oil terminals, ro-ro ship terminals, cruise terminals, ferry terminals, bulk or general cargo loading docks, ship repair or recycling facilities, offshore terminals, etc.). This standard can also be applied to inland ports, small boat terminals and ports where PRFs are configured according to regional settings.2 Normative referencesThere is no content in this chapter.3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Receiving ability adequacy The PRF can meet the needs of the ship's normal port of call, does not hinder the use of the ship, does not cause undue delay, and helps protect the environment. ability. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37445-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 37445-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 37445-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37445-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
