GB/T 37402-2019 English PDFUS$414.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 37402-2019: Biomimetics - Biomimetic structural optimization Status: Valid
Basic dataStandard ID: GB/T 37402-2019 (GB/T37402-2019)Description (Translated English): Biomimetics - Biomimetic structural optimization Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A40 Classification of International Standard: 07.080 Word Count Estimation: 22,260 Date of Issue: 2019-05-10 Date of Implementation: 2019-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 37402-2019: Biomimetics - Biomimetic structural optimization---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Biomimetics--Biomimetic structural optimization ICS 07.080 A40 National Standards of People's Republic of China Bionics bionic structure optimization (ISO 18459.2015, IDT) Published on.2019-05-10 2019-12-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 symbols and terminology 2 5 The principle of self-optimization in nature and the optimization method that is thus transplanted 3 6 Application of the method 5 6.1 Application Scope and Limitations 5 6.2 Computer Aided Optimization (CAO) 5 6.2.1 Stress Control Growth 5 6.2.2 Contraction 6 6.2.3 Application of finite element analysis (FEA) in practice 7 6.3 Soft Area Clearance (SKO) 8 6.3.1 Principle of Soft Area Clearing Method 8 6.3.2 Implementation of Soft Area Clearance Principle in Finite Element Analysis 8 6.3.3 Soft Area Clearing Method Application Example 9 6.4 Computer Aided Internal Optimization (CAIO) 11 6.4.1 Example of computer-assisted internal optimization method. curved cylinder 12 6.5 Stretching Triangle Method 13 6.5.1 Overview 13 6.5.2 Stretching triangle saves material 14 6.5.3 Stretching triangles to optimize fiber orientation 15 6.5.4 Example of a stretched triangle method. shoulder 16 Reference 18ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to ISO 18459.2015 "bionics bionic structure optimization". The documents of our country that have a consistent correspondence with the international documents referenced in this standard are as follows. ---GB/T 14124-2009 Vibration and vibration measurement of mechanical vibration and impact buildings and their evaluation of buildings Guide (ISO 4866.1990/Amd.2.1996, IDT) This standard is proposed and managed by the China Machinery Industry Federation. This standard was drafted. Beijing Machinery Industry Automation Research Institute Co., Ltd., Zhejiang University, Tsinghua University. The main drafters of this standard. Gao Xueqin, Li Xiaodong, Su Hongye, and Huang Shuangxi.IntroductionThe basis of the bionic optimization method is derived from the knowledge gained from the study of natural biological structures and processes. As a special branch of optimization, structural optimization involves the ideal design of components while taking into account current boundary conditions. through Commonly optimized attributes include weight, load capacity, stiffness or life. Its purpose is to optimize by maximizing or minimizing the value of an attribute. One or more of these attributes. In general, it is best to use the material as perfectly as possible while avoiding overload and underload areas. Given almost every skill Surgical components will exhibit some changes in the cross section, ie, the gap, due to functional reasons, thus causing a change in the notch, so, in the structure It is especially important to minimize the load-bearing capacity of the gap in the optimization. In the traditional structural optimization, reduce the notch shape factor, that is, lack The stress concentration factor above the mouth is achieved by either selecting the maximum curvature radius of the gap or using the phase of the gap Interaction and increase the unloading groove. However, the shape of the notch does not change due to this step. As early as the 1930s Suggestions for using other notch shapes (baud curves, ellipses, logarithmic spirals, etc.), but not widely used in technology, are only occasionally use. Computer-based bionic optimization tools, such as Computer Aided Optimization (CAO) and Soft Area Clearance (SKO), have improved components The shape and topology are such that the forces are balanced by using finite element analysis (FEA). These tools have been used since their appearance in.1990. In the industry. However, this need to optimize using finite element analysis actually limits the number of possible users because doing so The operation requires powerful computers, specialized software and experts. Therefore, there needs to be a simpler and faster optimization method, not only The home is operational and the design engineer can operate, and it is this demand that eventually led to the emergence of the "stretching triangle method." Despite the method Development began in.2006, but it has been applied in practice because it is easy to understand and easy to apply. Wide range of bionic optimization methods The universal application is relatively easy to operate, user-friendly and easy to apply, allowing users to perform component optimization operations early in the design process. Work. With regard to the use of the stretched triangle method, it is possible to implement this method easily using a computer aided design (CAD) system. Since each optimization means specializing in the selected load conditions, service loading can be well known. other Load conditions that are not taken into account may cause the component to withstand greater forces. Bionics bionic structure optimization1 ScopeThis standard points out the function and scope of the bionic structure optimization method. These methods involve lines under static and fatigue loading conditions. Sexual structure problems. The methods described in this standard are illustrated by examples. Computer-based biomimetic based on biological models of natural growth and by using technical component finite element method (FEM) optimization methods Tools include Computer Aided Optimization (CAO), Soft Area Clearance (SKO), and Computer Aided Internal Optimization (CAIO). Of these methods The goal is to reduce component weight or enhance component capabilities and extend component life to optimize material applications. In addition, this standard also describes a simpler and faster "stretching triangle method". Bionic optimization method is widely used, and it is easier to add Understanding and using, enabling users to implement component optimization early in the design process. The purpose of this standard is to familiarize users with the bionic optimization method as an effective tool to extend the life of the part and reduce the weight of the part. Promote the widespread use of these methods to support sustainable development. This standard is not only for designers, developers, engineers and technicians, but also for those tasks that are assigned to design and evaluate load structures. Prepared by personnel.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO 2394 General Principles of Reliability for Structures (Generalprinciplesonreliabilityforstructures) ISO 4866 Mechanical vibration and impact building vibration vibration measurement and its evaluation of the influence of buildings (Mechanical vibrationandshock-Vibrationoffixedstructures-Guidelinesforthemeasurementofvibrationsand Evaluationoftheireffectsonstructures) ISO 13823 General Principles for Building Durability (Generalprinciplesonthedesignofstructuresfordurability) ISO 18458 Biomimetics-Terminology, concepts and methods3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Mechanical adaptive growth mechanicaladaptivegrowth Biological structures such as trees and bones are locally added to the stressed area or removed from the small force range. The appropriate response (such as mechanical load) made by the change. Example. A thicker part of the tree ring. 3.2 Algorithm algorithm Precisely describe the limited steps to complete a task. 3.3 Design space designspace The amount of design permission for a part. Note 1. When designing, the edges of the components should not exceed the design space. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37402-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 37402-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 37402-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37402-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
