GB/T 3738-2008 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3738-2008: 24-degree cone connectors -- Straight thread elbow
Status: Valid

GB/T 3738: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3738-2008	149	Add to Cart	2 days	24-degree cone connectors -- Straight thread elbow	Valid
GB/T 3738.1-1983	199	Add to Cart	2 days	Straight thread elbow--Assembly	Obsolete

Similar standards

GB/T 1048   GB/T 1047   GB/T 4622.1   GB/T 3734   GB/T 3735   GB/T 3733   

Basic data

Standard ID: GB/T 3738-2008 (GB/T3738-2008)
Description (Translated English): 24-degree cone connectors -- Straight thread elbow
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J15
Classification of International Standard: 21.060.60
Word Count Estimation: 5,510
Date of Issue: 2008-05-07
Date of Implementation: 2008-11-01
Older Standard (superseded by this standard): GB/T 3738.1-1983; GB/T 3738.2-1983
Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the card sets of adjustable pipe to the end of the elbow joint and the joint body size, marking and technical requirements. This standard applies to the pipe diameter of 6mm ~ 42mm, the maximum working pressure of 10MPa ~ 63MPa hydraulic fluid power and general -purpose pipeline system.

GB/T 3738-2008: 24-degree cone connectors -- Straight thread elbow

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
24-degree cone connectors. Straight thread elbow ICS 21.060.60 J15 National Standards of People's Republic of China Replacing GB/T 3738.1-1983, GB/T 3738.2-1983 Adjustable sleeve type end fittings elbow Posted 2008-05-07 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is one bite type pipe fittings series. This standard is GB/T 3738.1-1983 "sleeve type end fittings right angle" and GB/T 3738.2-1983 "card sets connected at right angles to the end Amendment head Style ". The main amendments are as follows. --- The two standard content integration; --- Modified Chinese and English name; --- To increase the adjustable threaded post end, canceled the original standard type A threaded post end; --- The nominal pressure G (250) and J (400) to modify the maximum working pressure of 10MPa ~ 63MPa, and is divided into two lines L and S Column series product size range of adjustment has been made; --- Adjust the size of the pipe diameter range, and revised the relevant size; --- Reducing the parameters should be part of the manufacturer's control; --- Cancel the weight data; --- Cancel the marked surface roughness, surface roughness is given in GB/T 3765 "bite type pipe joint technical conditions" in. Since the implementation of this standard replaces GB/T 3738.1-1983 and GB/T 3738.2-1983. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee pipe accessories. This standard is drafted by. The machine Productivity Promotion Center, Haiyan Pipe Manufacturing Co., Limited Jianhu particularly good hydraulic fittings the company. Participated in the drafting of this standard. Eaton (Ningbo) fluid connector Ltd., Jiaxing Mai Site Pipe Manufacturing Co., Ltd., Zhejiang, China Valve Co., Ltd., a high-Bo Haiyan Pipe Fittings Co., Ltd., Haiyan tube Manufacturing Co., Ltd. Jiaozuo City roads lead to hydraulic attachments. The main drafters of this standard. Gengzhi school, Li Weirong, Zhou Shunhua, Zuo Jun, Feng Feng, Tao Zhongming, Xuchang Xiang, Ruanhao Feng, Zhou Jianfei, Wang Limin. This standard replaces the standards previously issued as follows. --- GB/T 3738.1-1983; --- GB/T 3738.2-1983. Adjustable sleeve type end fittings elbow

1 Scope

This standard specifies the card sets Adjustable end elbow pipe dimensions, marking and technical requirements of the joint and the joint body. This standard applies to the pipe diameter of 6mm ~ 42mm, maximum working pressure of hydraulic fluid power and general 10MPa ~ 63MPa Purpose pipeline system.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3759-2008 bite type pipe joint connector nut GB/T 3764-2008 ferrule GB/T 3765-2008 bite type tube fittings GB/T 5649-2008 fittings with nut and washer

3 Dimensions

Card sets of adjustable size to the end of the elbow pipe joints and fittings shall conform to the body 1, the provisions of Figure 2 and Table 1, the size should be adjustable to the end symbol Co GB/T 3765 provisions of Appendix A of the joint body ferrule end dimensions shall comply with GB/T 3764's.

4 Mark

4.1 labeling method Adjustable sleeve type end labeling method elbow pipe joints and the joint body should be consistent with the provisions of GB/T 3765's. 4.2 tag example Connector Series L, the pipe diameter of 10mm, the common thread (M) Adjustable threaded post end surface galvanized steel sleeve type can be Tune to end elbow fittings marked. Fittings GB/T 3738 L10 Connector Series L, the pipe diameter of 10mm, the common thread (M) Adjustable threaded post end surface galvanized steel sleeve type can be Tune to end elbow joint body marked. Joint body GB/T 3738 L10

5 Technical requirements

Technical requirements according to the provisions of GB/T 3765's. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3738-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3738-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3738-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3738-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3738-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3738-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.