GB/T 3716-2023 English PDFUS$984.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 3716-2023: Pallets for materials handling - Vocabulary Status: Valid GB/T 3716: Historical versions
Basic dataStandard ID: GB/T 3716-2023 (GB/T3716-2023)Description (Translated English): Pallets for materials handling - Vocabulary Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A85 Classification of International Standard: 01.040.55, 55.180.20 Word Count Estimation: 54,596 Date of Issue: 2023-11-27 Date of Implementation: 2023-11-27 Older Standard (superseded by this standard): GB/T 3716-2000 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 3716-2023: Pallets for materials handling - Vocabulary---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 01:040:55;55:180:20 CCSA85 National Standards of People's Republic of China Replace GB/T 3716-2000 pallet terminology (ISO 445:2013,IDT) Published on 2023-11-27 Implemented on 2023-11-27 State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III 1 Scope 1 2 Normative references 1 3 General terms 1 4 flat pallets 3 5 Pallet with superstructure 8 6 Pallet upper member 13 7 Pallet components and features14 8 Pallet accessories 27 9 Mechanical fasteners 28 10 Pallet usage31 11 Pallet size 32 Appendix A (Normative) Unit Cargo Handling Terminology 34 Appendix B (Informative) Skateboard Pallet Terminology 37 Reference 39 Index 40ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB/T 3716-2000 "Pallet Terminology": Compared with GB/T 3716-2000, except for structural adjustments and editorial changes In addition, the main technical changes are as follows: a) The expressions of terms and definitions of rated load and payload have been changed (see 3:2, 3:8, 2:2, B3 of the:2000 edition), and the collection of Medium load, uniform load, embossed load, rigid load, maximum working load, safety factor, stiffness, test load, ultimate load Terms and definitions of load and failure (see 3:3, 3:4, 3:5, 3:6, 3:7, 3:9, 3:10, 3:11, 3:12, 3:13); b) Changed the terms and definitions of single-sided pallets, shelves, pallets with fork grooves on the longitudinal beams, pallets with overlapping longitudinal beam plates, and pallets with arbitrary forks: description (see 4:2, 4:3, 4:10, 4:11, 4:12, 3:1, B2, 3:5:1, 3:5:2, 3:6 of the:2000 edition), adding flat pallets, embedded Terms and definitions for nested pallets, asymmetrical pallets, wing pallets, single-sided wing pallets, double-sided wing pallets, repair pallets, restructured pallets (See 4:1, 4:15, 4:16, 4:17, 4:18, 4:19, 4:20, 4:21); c) Changed the expressions of terms and definitions of box pallets and cylinder pallets (see 5:2:1, 5:2:7, 4:2, 4:2:6 of the:2000 edition); d) The terms and definitions of hoardings and pallet conversion devices have been changed (see 6:1 and 6:2, 5:1 and 5:2 of the:2000 edition); e) The terms and definitions of top decking, top decking assembly, bottom decking, horizontal decking edge, center decking group, cup leg, and conical leg have been changed: Expression of meaning (see 7:1:2, 7:1:3, 7:1:4, 7:2:2, 7:6:9, 7:8:3, 7:8:5, 6:1, 6:1:1, 6:2, 6:4 of the:2000 edition, 6:9:4, 6:13:1, 6:13:2:1), added paving, vertical board edge, baffle, fork groove length, fork groove positioning, fork groove depth, fork groove circle Corner radius, center pad, side intermediate pad, corner pad, end intermediate pad, upper positioning component, ribs, grid structure Terms and definitions (see 7:1:1, 7:2:3, 7:2:4, 7:6:3, 7:6:4, 7:6:5, 7:6:6, 7:7:2, 7:7:3, 7:7:4, 7:7:5, 7:8 :1, 7:9:1, 7:9:2); f) Changed the expressions of terms and definitions of nails, bent nails, spiral-threaded nails, twist nails and screws (see 9:1:1, 9:1:3, 9:1:5, 9:1:9, 9:2:3,:2000 version 8:1, 8:1:1, 8:1:2:1, 8:1:4, 8:3), adding polished nails, coiled nails, grooved nails, and metal connections Terms and definitions for plates and snap joints (see 9:1:2, 9:1:10, 9:1:11, 9:2:8, 9:2:9); g) Changed the expression of terms and definitions of disposable pallets, reusable pallets, self-use pallets, exchangeable pallets, and shared pallets (See 10:1, 10:2, 10:3, 10:4, 10:5, 9:1, 9:2, 9:3, 9:4, 9:4:1 of the:2000 edition), added the terminology and Definition (see 10:6); h) Changed the expression of terms and definitions of length, width and height (see 11:2:1, 11:2:2, 11:2:3 and 11:3:3,:2000 edition 10:1:1, 10:1:2, 10:1:3 and 10:2:3), the terms and definitions of pallet size, end face and side are added (see 11:1, 11:2:4, 11:2:5); i) Changed the nature of Appendix A (see Appendix A, Appendix B of the:2000 version); j) The expressions of the terms and definitions of unit cargo, block stacking, stacking height, partitions, shrink film, and stretch film have been changed (see A:1:1, A:2:3, A:2:4, A:4:1, A:4:2, A:4:3, B1, B6, B5, B8, B9, B10 of the:2000 edition), adding stacking and heaping Stacking width, stacking depth, vertical stacking ratio, holding height ratio, upper rack, rack along the long side, rack along the wide side, strapping tape, anti-slip pad, anti-skid Terms and definitions of slip tape (see A:2:2, A:2:5, A:2:6, A:2:7, A:2:8, A:3:1, A:3:2, A:3:3, A:4:4, A:4:5, A:4:6), the terms and definitions of block dense stacking, collapsible, foldable, and settable are deleted (see B7 of the:2000 edition, B11, B12, B13); k) Changed the terminology of disposable skateboard pallet, loading surface, recyclable skateboard pallet, reusable skateboard pallet, skateboard pallet and expression of definitions (see B:5, B:9, B:14, B:15, B:17, A3:1, A2:1, A3:3, A3:2, A1:1 of the:2000 edition), Increase Corrugated cardboard, transverse direction, skateboard pallet depth, front, skateboard pallet length, longitudinal direction, maximum load weight, nominal size, skateboard pallet Terms and definitions for plate thickness, slide plate pallet width, wing width, and ultimate tensile strength (see B:2, B:3, B:4, B:6, B:8, B:10, B:11, B:12, B:19, B:20, B:21, B:22), delete the single-wing skateboard, opposite-side double-wing skateboard, and adjacent-side double-wing skateboard: Terms and definitions of board, three-wing skateboard, four-wing skateboard, thickened wing board (see A1:2, A1:3, A1:4, A1:5 of the:2000 edition, A1:6, A2:3:1): This document is equivalent to ISO 445:2013 "Terminology for Material Handling Pallets": This document adds Chapter 2 "Normative Reference Documents": This document has made the following minimal editorial changes: ---In order to coordinate with the existing standards, the standard name is modified to "Pallet Terminology"; ---Added notes for 3:1, 4:2, and 4:20; ---Changed the reference standards of Note 2 in 5:2:7 and 5:2:8; ---Added the indexing number description of Figure 50 and Figure 76: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Federation of Logistics and Purchasing: This document is under the jurisdiction of the National Logistics Standardization Technical Committee (SAC/TC269): This document was drafted by: Shenzhen Prato Technology Co:, Ltd:, Shandong Lujie Packaging Group Co:, Ltd:, Xiamen Institute of Standardization, Zhejiang Zhengji Plastic Co:, Ltd:, China Federation of Logistics and Purchasing, Tianjin CIMC Logistics Equipment Co:, Ltd:, FAW Logistics Co:, Ltd: Xinchuang (Tianjin) Packaging Industrial Technology Co:, Ltd:, Changchun FAW International Logistics Co:, Ltd:, FAW Logistics (Changchun Lushun) Storage and Transportation Co:, Ltd:, Nanjing Lanyuda Storage Equipment Manufacturing Co:, Ltd:, Dalian CIMC Logistics Equipment Co:, Ltd:, China Academy of Railway Sciences Group Co:, Ltd: Quasi-Measurement Research Institute, Inner Mongolia Jiayuntong Intelligent Environmental Protection New Materials Co:, Ltd:, PepsiCo (Qingdao) Packaging Co:, Ltd:, Baowei Packaging (Shanghai) Co:, Ltd:, Chongqing Sansan Electric Co:, Ltd:, Anhui Fansheng Wood Packaging Co:, Ltd: The main drafters of this document: Zhang Jinmei, Li Zhenliang, Qi Wenxing, Qi Ting, Lin Zequan, Kou Gaojie, Zhang Zhenyuan, Ma Zengrong, Sun Xijun, Zhang Jinshu, Wang Rui, Sun Shikun, Cai Li, Wang Xuan, Gao Jianju, Chen Yu, Li Junyi, Wang Yafeng, Zheng Hongtao, Zhang Yingying, Wei Xiuhua, Ni Jiansheng, Zhao Yi, Li Taiping, Fang Binzheng, Huang Dong, Zhang Dezhi, Wang Hengqiang, Tan Zifan: The previous versions of this document and the documents it replaces are as follows: ---First published as GB/T 3716-1983 in 1983, first revised in:2000; ---This is the second revision: pallet terminology1 ScopeThis document defines general terms related to pallets for unit load material handling and defines flat pallets, pallets with upper members, pallet tops Components, pallet components and features, pallet accessories, mechanical fasteners, pallet usage, pallet size terms and their definitions: This document applies to the application of terminology in pallets and related fields:2 Normative reference documentsThis document has no normative references:3 Common terms3:1 pallet pallet A kind of equipment used to assemble, carry, store, load and unload, stack, transport or display goods and loads: The minimum height meets the requirements of pallet trucks, forklifts and Other horizontal rigid boards suitable for handling requirements of loading and unloading equipment: see picture 1: Note 1: The pallet may be provided with or equipped with upper members: Note 2: The terminology of unit cargo handling is defined in Appendix A, and the terminology of sliding pallets is defined in Appendix B: Figure 1 Pallet 3:2 nominal load The minimum safe load value under specific support conditions regardless of the type of load (excluding concentrated loads): Note 1: "Specific support conditions" refers to the range of service conditions specified in 7:1 of ISO 8611-2:2011: Note 2: The rated load is used to compare the performance of different pallets and does not represent the actual payload of the pallet in use: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 3716-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 3716-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 3716-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3716-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 3716-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3716-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |