GB/T 3691-2008 English PDF

US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 3691-2008: Mechanical properties testing method of steel wool cement tile
Status: Valid

GB/T 3691: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 3691-2008	459	Add to Cart	4 days	Mechanical properties testing method of steel wool cement tile	Valid
GB/T 3691-1983	439	Add to Cart	4 days	Test method of ferrocement panels in flexure	Obsolete

Similar standards

GB/T 33544   GB 13476   JC/T 746   GB/T 4084   GB/T 8239   GB 4623   

Basic data

Standard ID: GB/T 3691-2008 (GB/T3691-2008)
Description (Translated English): Mechanical properties testing method of steel wool cement tile
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q14
Classification of International Standard: 91.100.30
Word Count Estimation: 20,272
Date of Issue: 2008-07-30
Date of Implementation: 2009-03-01
Older Standard (superseded by this standard): GB/T 3691-1983; GB/T 3692-1983
Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the ferro-cement board by bending, pull performance test methods in axial, specimens produced, test equipment, test procedures and test reports. This standard applies to a thickness of not more than 60mm of ferro-cement board by bending, pulled by mechanical testing.

GB/T 3691-2008: Mechanical properties testing method of steel wool cement tile

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mechanical properties testing method of steel wool cement tile ICS 91.100.30 Q14 National Standards of People's Republic of China Replacing GB/T 3691 ~ 3692-1983 Ferrocement panels Mechanical tests Posted 2008-07-30 2009-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 specimen shape and size 2 5 3 specimen production 6 test equipment, apparatus and instruments 3 7 Test Method 3 8 10 test reports Appendix A (normative) Main test equipment, instruments 11 Annex B (informative) trial 12 Preload value Appendix C (normative) Determination of bending stiffness calculated 14 Annex D (informative) Bending test specimen deformation uniformity of regulation and control methods 15 Appendix E (normative) calculated by the axial tensile modulus of elasticity of the preload value 16

Foreword

This standard replaces GB/T 3691-1983 "ferrocement panels by bending test method", GB/T 3692-1983 "ferrocement panels axis Pull Test methods by heart. " This standard and GB/T 3691-1983, GB/T 3692-1983 compared to the main changes are as follows. --- Increasing the normative references; --- Increasing the terms and definitions of ferrocement panels and name of the pilot project; --- Clear test equipment type, precision and scale value; --- Use of legal units of measurement current provisions; --- Canceled a GB/T 3692-1983 Appendix B. The Standard Appendix A, Appendix C, Appendix E is normative appendix, Appendix B, Appendix D is an informative annex. The standard proposed by China Building Materials Federation. This standard by the National Standardization Technical Committee cement products. This standard is drafted by. Suzhou Institute of concrete cement products. The main drafters of this standard. Feng Liping, Wu Nanfeng, Wu Changxu, Xizhe, Xiexue Ying, Chen Huizhen. The standard commission Suzhou Institute of concrete cement products responsible for the interpretation. This standard replaces the standards previously issued as follows. --- GB/T 3691-1983; --- GB/T 3692-1983. Ferrocement panels Mechanical tests

1 Scope

This standard specifies the ferrocement slab flexural, axial tensile performance test method by specimen production, test equipment, test procedures and test Inspection reports. This standard applies to not more than 60mm thickness of steel mesh cement board flexural, tensile mechanical properties test subject.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Representation GB/T 1250 limit values \u200b\u200band the method of determining GB/T 8170 numerical rounding rules

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 With steel mesh or steel mesh and reinforced as a reinforcing material, cement mortar composition of the substrate material made of a thin-walled structure. 3.2 Only with steel mesh, steel mesh reinforced cement unworthy. 3.3 Configure steel mesh steel mesh and reinforced concrete. 3.4 Ferrocement panels along the longitudinal direction of the configuration of rebar. 3.5 Along the width direction of the steel mesh reinforced cement board configuration. 3.6 Ferrocement specimens under axial tension by axial role in the various stages of crack development, strength and deformation properties. 3.7 In the bending moment, bending mechanical properties of the various stages of ferrocement specimen. 3.8 A way to make ferrocement middle of the plate (300 to 400) under pure bending flexural test apparatus within the mm range. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 3691-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 3691-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 3691-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 3691-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 3691-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3691-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.