GB/T 3670-2021 PDF EnglishUS$230.00 · In stock · Download in 9 seconds
GB/T 3670-2021: Covered electrodes for manual metal arc welding of copper and copper alloys Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 3670: Historical versions
Similar standardsGB/T 3670-2021: Covered electrodes for manual metal arc welding of copper and copper alloys---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT3670-2021NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.160.20 CCS J 33 Replacing GB/T 3670-1995 Covered Electrodes for Manual Metal Arc Welding of Copper and Copper Alloys (ISO 17777:2016, Welding Consumables – Covered Electrodes for Manual Metal Arc Welding of Copper and Copper Alloys – Classification, MOD) ISSUED ON: DECEMBER 31, 2021 IMPLEMENTED ON: JULY 01, 2022 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative References ... 5 3 Terms and Definitions ... 5 4 Models ... 5 5 Technical Requirements ... 6 6 Test Methods ... 10 7 Reinspection ... 10 8 Technical Conditions of Supply ... 10 Appendix A (Informative) Comparison List of Clause No... 11 Appendix B (Informative) Technical Differences and Causes between this Document and ISO 17777:2016 ... 12 Appendix C (Informative) Comparison of Electrode Models ... 13 Appendix D (Informative) Electrode Related Physical Properties and Application Example ... 14ForewordThis Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization – Part 1: Rules for the Structure and Drafting of Standardizing Documents. This Document replaced GB/T 3670-1995 Coated Electrodes for Copper and Copper Alloys. Compared with GB/T 3670-1995, the major technical changes of this Document are as follows besides the structural adjustment and editorial modifications: --- Retain models of all 12 electrode in the original standard; re-compiled the models according to ISO 17777:2016; and add 11 models, such as ECu1892, ECu1893, ECu5180, ECu5180B, ECu5410, ECu5210, ECu6100A, ECu6325, ECu6328, ECu7158 and ECu6561 (see 4.2 of this Edition; 3.2 of 1995 Edition); --- Delete the technical requirements for mechanical properties (see 4.4 and 5.4 of 1995 Edition). This Document uses the redrafting method to modify and adopt ISO 17777:2016 Welding Consumables – Covered Electrodes for Manual Metal Arc Welding of Copper and Copper Alloys – Classification. Compared with ISO 17777:2016, this Document made some structural adjustments. Appendix A list the comparison list of changes in clauses number between this Document and ISO 17777:2016. Compared with ISO 17777:2016, this Document has the technical differences. Appendix B gives the list of corresponding technical differences and causes. This Document also made the following editorial modifications: --- Modify the standard name into Covered Electrodes for Manual Metal Arc Welding of Copper and Copper Alloys. --- The Table C.1 adds the column of “this Document”; --- Delete the bibliography. Please note some contents of this Document may involve the patents. The issuing agency of this Document shall not assume the responsibility to identify these patents. This Document was proposed by and under the jurisdiction of National Technical Committee on Welding of Standardization Administration of China (SAC/TC 55). Drafting organizations of this Document: Harbin Welding Institute Limited Company; Shanghai Cimic Welding Consumables Co., Ltd.; Jinzhou Special Welding Consumable Co., Ltd.; Wuhan Temo Welding Consumables Co., Ltd.; Kunshan Gintune Welding Co., Ltd.; Covered Electrodes for Manual Metal Arc Welding of Copper and Copper Alloys1 ScopeThis Document specifies the models, technical requirements, test methods, re-inspection and technical delivery conditions of copper and copper alloy electrodes. This Document applies to copper and copper alloy electrodes (hereinafter referred to as “electrodes”) whose copper content exceeds any other element content in the deposited metal.2 Normative ReferencesThe provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. GB/T 25775 Technical Delivery Conditions for Welding Consumables - Type of Product Dimensions Tolerances and Markings (GB/T 25775-2010, ISO 544:2003, MOD) GB/T 25777 Preparation Methods of Deposited Metal Specimens for Chemical Analysis (GB/T 25777-2010, ISO 6847:2000, IDT) GB/T 25778 Procurement Guidelines for Welding Consumables (GB/T 25778-2010, ISO 14344:2010, MOD)3 Terms and DefinitionsThere is no terms and definitions that need to be given in this Document.4 Models4.1 Classification of models The electrode models are classified according to the chemical composition of the deposited metal. See Appendix C for comparison of electrode models in this Document with other relevant standards. See Appendix D for electrode-related physical properties and application examples. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 3670-2021 be delivered?Answer: The full copy PDF of English version of GB/T 3670-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 3670-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 3670-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 3670-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 3670-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 3670-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 3670-2021?A step-by-step guide to download PDF of GB/T 3670-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 3670-2021". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
