GB/T 36671-2018 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 36671-2018: Design requirements for high speed shafting of OSV Status: Valid
Basic dataStandard ID: GB/T 36671-2018 (GB/T36671-2018)Description (Translated English): Design requirements for high speed shafting of OSV Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U48 Classification of International Standard: 47.020.20 Word Count Estimation: 18,160 Date of Issue: 2018-09-17 Date of Implementation: 2019-04-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 36671-2018: Design requirements for high speed shafting of OSV---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Design requirements for high speed shafting of OSV ICS 47.020.20 U48 National Standards of People's Republic of China Marine engineering ship high speed shafting design requirements Published on.2018-09-17 Implementation of.2019-04-01 State market supervision and administration China National Standardization Administration issued ContentForeword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General requirements 1 5 Design Principle 2 6 Manufacturing requirements 6 7 Installation requirements 6 8 Test report 6 Appendix A (informative) Shaft blank requirements 7 Appendix B (Normative) Shaft processing requirements 9 Appendix C (informative) Installation of the shafting 11 Reference 13ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Marine Machinery Standardization Technical Committee (SAC/TC137). This standard was drafted. Wuhan Marine Machinery Co., Ltd. The main drafters of this standard. Qiu Xiaofeng, Li Lei, Wang Jianqiang, Zhao Guoqing, Luo Yin, Fan Yong. Marine engineering ship high speed shafting design requirements1 ScopeThis standard specifies the requirements for the design, manufacture, installation, inspection and testing of high-speed shafting of marine engineering vessels. This standard is applicable to the high-speed shafting of ships of marine engineering vessels with pitch-controlled paddles and full-rotary rudder propellers as the main thrusters. For other ships The high-speed shaft system can also be used as reference.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. CB/T 4312 shaft forging technical conditions3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 High speed shafting highspeedshafting Located between the prime mover and the gearbox, it does not withstand the thrust generated by the propeller, and the shaft segment with a speed of not less than 400r/min and its annex. 3.2 Thrust shafting A shaft section and its accessories that are placed between the gearbox and the propeller while receiving the thrust generated by the propeller. 3.3 Full-rotation rudder propeller device azimuththruster A propulsion device capable of rotating 360° around a rotation axis and capable of transmitting thrust at an arbitrary angle while having the function of a rudder. 3.4 High-speed zigzag shaft flexuousshafting The centerline of the shafting is not on the same axis and is the high-speed shaft of the fold line. 3.5 Linear shafting The centerline of the shafting system is on the same axis and is a linear high-speed shaft system.4 General requirements4.1 In the range of main engine operating conditions, the high speed shafting should have sufficient strength and rigidity, stable and reliable. 4.2 In the range of main engine operating conditions, the torsional resonance and lateral and longitudinal resonance should not occur in the high speed shafting. 4.3 The high speed shafting should have good deformation adaptability to the ship. 4.4 One or more flexible couplings shall be designed for high speed shafting. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36671-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 36671-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 36671-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36671-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
