GB/T 36450.6-2021 English PDFUS$4714.00 · In stock
Delivery: <= 15 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 36450.6-2021: Information technology - Storage management - Part 6: Fabric Status: Valid
Basic dataStandard ID: GB/T 36450.6-2021 (GB/T36450.6-2021)Description (Translated English): Information technology - Storage management - Part 6: Fabric Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L77 Word Count Estimation: 277,290 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 36450.6-2021: Information technology - Storage management - Part 6: Fabric---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Information technology - Storage management - Part 6.Fabric ICS 35.200 CCSL77 National Standards of People's Republic of China Information Technology Storage Management Part 6.Exchange structure Part 6.Fabric (ISO /IEC 24775-6.2014, IDT) Released on 2021-10-11 2022-05-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsPreface Ⅶ Introduction Ⅷ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Typographical Convention 1 4.1 Maturity model 1 4.2 Experimental maturity level 2 4.3 Achieved maturity level 2 4.4 Stable maturity level 3 4.5 Completed maturity level 3 4.6 Discarded materials 3 5 Switch fabric configuration file 4 5.1 Description 4 5.2 Health and fault management 9 5.3 Precautions for cascading 9 5.4 Supported sub-configuration files and packages 9 5.5 Configuration file method 9 5.6 Client Notes and Methods 9 5.7 Registered name and version 14 5.8 CIM Elements 14 6 Enhanced zone and enhanced zone control sub-profile 53 6.1 Description 53 6.2 Health and fault management 53 6.3 Precautions for cascading 53 6.4 Dependencies of configuration files, sub-configuration files and packages 54 6.5 Configuration file method 54 6.6 Client Precautions and Methods 54 6.7 Registered name and version 57 6.8 CIM Elements 57 7 Zone control sub-configuration file 60 7.1 Description 60 7.2 The persistent name of the configuration file and its associated ID 60 7.3 Equipment requirements 60 7.4 Health and fault management 60 7.5 Precautions for cascading 61 7.6 Dependencies of configuration files, sub-configuration files, and packages 61 7.7 Configuration file method 61 7.8 Client Precautions and Methods 65 7.9 Registered name and version 76 7.10 CIM elements 76 8 Structure equipment management interface sub-configuration file 78 8.1 Description 78 8.2 Health and fault management considerations 79 8.3 Precautions for cascading 79 8.4 Dependencies of configuration files, sub-configuration files and packages 79 8.5 Configuration File Method 79 8.6 Client Notes and Methods 79 8.7 Registered name and version 79 8.8 CIM Elements 79 9 Structure path performance sub-profile 88 9.1 Description 88 9.2 Health and fault management considerations 89 9.3 Dependencies of configuration files, sub-configuration files and packages 89 9.4 Configuration file method 89 9.5 Client Notes and Methods 89 9.6 Registered name and version 89 9.7 CIM Elements 90 10 Fibre Channel Security Sub-Profile 94 10.1 Description 94 10.2 Health and fault management considerations 95 10.3 Precautions for cascading 96 10.4 Supported configuration files, sub-configuration files and packages 96 10.5 Configuration file method 96 10.6 Client Notes and Methods 96 10.7 Registered name and version 96 10.8 CIM elements 96 11 Exchange structure view sub-configuration file 100 11.1 Description 100 11.2 Health and fault management considerations 102 11.3 Precautions for cascading 102 11.4 Supported configuration files, sub-configuration files and packages 102 11.5 Configuration file method 103 11.6 Client Notes and Methods 103 11.7 Registered name and version 103 11.8 CIM Elements 103 12 Virtual Switching Structure Sub-Configuration File 108 12.1 Description 108 12.2 Health and fault management considerations 109 12.3 Precautions for cascading 110 12.4 Supported configuration files, sub-configuration files and packages 110 12.5 Configuration file method 110 12.6 Client Notes and Methods 110 12.7 Registered name and version 110 12.8 CIM Elements 110 13 Switch configuration file 111 13.1 Description 111 13.2 Health and fault management considerations 116 13.3 Precautions for cascading 116 13.4 Dependencies of configuration files, sub-configuration files, and packages 116 13.5 Configuration file method 117 13.6 Client Notes and Methods 117 13.7 Registered name and version 133 13.8 CIM Elements 133 14 Exchange configuration data sub-configuration file 156 14.1 Description 156 14.2 Persistent Names and Related IDs of Configuration Files 157 14.3 Equipment requirements 157 14.4 Health and fault management considerations 157 14.5 Precautions for cascading 157 14.6 Configuration File Method---Apply Configuration Information (ApplyConfiguration) 157 14.7 Client Notes and Methods 157 14.8 Registered name and version 158 14.9 CIM Elements 158 15 Blade sub-profile 160 15.1 Description 160 15.2 Health and fault management considerations 161 15.3 Precautions for cascading 161 15.4 Dependencies of configuration files, sub-configuration files, and packages 161 15.5 Configuration File Method 162 15.6 Client Notes and Methods 162 15.7 Registered name and version 162 15.8 CIM Elements 162 16 Switch partition sub-configuration file 170 16.1 Description 170 16.2 Health and fault management considerations 172 16.3 Precautions for cascading 172 16.4 Supported configuration files, sub-configuration files and packages 172 16.5 Configuration File Method 173 16.6 Client Notes and Methods 173 16.7 Registered name and version 173 16.8 CIM Elements 173 17 Extender Configuration File 179 17.1 Description 179 17.2 Health and fault management considerations 182 17.3 Precautions for cascading 182 17.4 Supported sub-configuration files and packages 182 17.5 Configuration File Method 183 17.6 Client Notes and Methods 183 17.7 Registered name and version 193 17.8 CIM Elements 193 18 Router Configuration File 223 19 SAS Expander Configuration File 224 19.1 Description 224 19.2 Health and fault management considerations 224 19.3 Precautions for cascading 224 19.4 Supported configuration files, sub-configuration files and packages 224 19.5 Configuration File Method 225 19.6 Client Notes and Methods 225 19.7 CIM Elements 225 19.8 Registered name and version 225 19.9 CIM Elements 225 20 Multi-port virtualization configuration file 230 20.1 Description 230 20.2 Implementation 230 20.3 Health and fault management considerations 231 20.4 Precautions for Cascading 231 20.5 Supported configuration files, sub-configuration files and packages 231 20.6 Configuration File Method 231 20.7 Client Notes and Methods 231 20.8 Registered name and version 231 20.9 CIM element 232 21 Interframe routing configuration file 239 21.1 Description 239 21.2 Health and fault management considerations 241 21.3 Precautions for cascading 241 21.4 Supported configuration files, sub-configuration files and packages 241 21.5 Configuration File Method 241 21.6 Client Precautions and Methods 241 21.7 Registered name and version 242 21.8 CIM Elements 242 Appendix A (informative) SMI-S Information Model 247 Appendix B (informative) The structure of the exchange structure configuration document 248 References 268ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 6 of GB/T 36450 "Information Technology Storage Management". GB/T 36450 has released the following parts. ---Part 1.Overview; ---Part 2.General architecture; ---Part 5.File system; ---Part 6.Exchange structure; ---Part 7.Host Elements; ---Part 8.Media Library. The translation method used in this document is equivalent to ISO /IEC 24775-6.2014 "Information Technology Storage Management Part 6.Exchange Structure". The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows. ---GB/T 36450.2-2021 Information Technology Storage Management Part 2.Common Architecture (ISO /IEC 24775-2.2014, MOD); ---GB/T 36450.7-2021 Information Technology Storage Management Part 7.Host Elements (ISO /IEC 24775-7.2014, MOD); ---GB/T 36450.8-2021 Information Technology Storage Management Part 8.Media Library (ISO /IEC 24775-8.2014, MOD). The following editorial changes have been made to this document. --- The "Scope" chapter supplements the applicable limits of this document. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This document was proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28). Drafting organizations of this document. Huazhong University of Science and Technology, China Electronics Standardization Institute, Yi Anxin Information Technology Research and Development (Beijing) Co., Ltd. Company, Inspur Electronic Information Industry Co., Ltd., Hangzhou Hikvision Digital Technology Co., Ltd., China University of Geosciences (Wuhan), Northwest University of Technology, Shenzhen Saixi Information Technology Co., Ltd., Sichuan Changhong Jiahua Information Products Co., Ltd., Tesilian Technology Group Co., Ltd. Company, Xiaomi Communication Technology Co., Ltd., East China Branch of China Electronics Standardization Institute, Jiangsu Saixi Technology Development Co., Ltd. The main drafters of this document. Feng Dan, Fan Jun, Sun Wei, Yang Hong, Deng Ze, Zhao Xiangyang, Peng Zhouxuan, Wu Yuanyang, Bai Xinlu, Wang Xiaochun, Liu Yang, Zhang Xiao, Wang Weichun, He Xia, Duan Xiaodong, Du Lei, Tong Wei, Shi Zhan, Su Nan, Shang Rongrong, Lu Zhou, Zhao Xiaonan, Du Wenbin, Xiao Dan, Zhou Juejia, Jiang Yi, Peng Lu, Zhan Tianqi, Zhao Wei, Chai Honggang, Jin Chao, Yu Jinyu.IntroductionGB/T 36450 "Information Technology Storage Management" is a recommended standard for guiding the standardization of storage management in my country. It aims to adopt a unified standard The quasi-management interface solves the interoperability of multi-vendor products and the management of cross-regional, multi-functional distributed storage systems. GB/T 36450 The compilation of "Information Technology Storage Management" is based on ISO /IEC 24775.Due to the long overall length and the content of it can be clearly divided into For a relatively independent but related part, GB/T 36450 is intended to be composed of eight parts. ---Part 1.Overview. Provides a general overview of the GB/T 36450 series of standards. ---Part 2.General architecture. Contains basic information about the interface, such as security and protocols. ---Part 3.General configuration file. Contains component configuration files that can be extended to other parts of the configuration files, such as target ports and jobs control. ---Part 4.Block equipment. Contains storage configuration files that support various forms of disk storage. ---Part 5.File system. Contains configuration files that support file systems, such as network attached storage (NAS). ---Part 6.Exchange structure. Contains configuration files that handle the interconnection of host servers and storage devices, such as switches. ---Part 7.Host element. Contains configuration files for storage software on the host server, such as disk partitions and host hardware RAID Controller. ---Part 8.Media Library. Contains configuration files for handling removable media, such as tape libraries. This file contains configuration files that deal with the interconnection of host servers and storage devices. The purpose is to establish the support for storage network Autonomous management configuration files for programs and devices. Information Technology Storage Management Part 6.Exchange structure1 ScopeThis document specifies the management configuration file of the autonomous (top-level) configuration file for programs and devices that can support storage networking. Book The file includes 4 autonomous sub-configuration files. ---Switching structure. This configuration file defines the storage network model and function including topology and area division management. ---Switch. This configuration file defines the model and function of the Fibre Channel switch, including status, device control, connectivity and products information. ---Extender. This configuration file defines network device models and functions, allowing Fibre Channel to be extended on other networks, especially In the Fibre Channel network (FCIP) based on TCP/IP. ---Internet Small Computer System Interface (iSCSI) to Fibre Channel (FC) Gateway. This configuration file defines the network device model And function, to map and convert iSCSI from IP network to Fibre Channel structure. This document is suitable for the design, development, and maintenance of file exchange systems in networked storage structures.2 Normative referencesThe content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to This document. ISO /IEC 24775-2.2014 Information Technology Storage Management Part 2.General Architecture (Informationtechnology- Storagemanagement-Part 2.Commonarchitecture) ISO /IEC 24775-3.2014 Information Technology Storage Management Part 3.Common Profile (Informationtechnolo- gy-Storagemanagement-Part 3.Commonprofiles) ISO /IEC 24775-7.2014 Information Technology Storage Management Part 7.Host Elements (Informationtechnology- Storagemanagement-Part 7.Hostelements) ISO /IEC 24775-8.2014 Information Technology Storage Management Part 8.Media Library (Informationtechnology- Storagemanagement-Part 8.Medialibraries)3 Terms and definitionsThe terms and definitions defined in ISO /IEC 24775-2.2014 apply to this document.4 Typographical conventions4.1 Maturity model In addition to informative and normative content, this document contains guidelines for emerging materials; such materials have undergone strict design review. However, the realization in commercial products is limited. This chapter gives a clear definition of such materials. The purpose of the typographic agreement is to ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 36450.6-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 36450.6-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 11 ~ 15 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 36450.6-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 36450.6-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
